TL;DR
This study investigates how adding a plasticizer (PEGDGE) to epoxy resins, both neat and reinforced with paper, affects their dielectric properties. By combining dielectric spectroscopy and activation energy analysis, the researchers identified and quantified distinct relaxation processes, revealing how the plasticizer content tunes these dynamics and impacts material performance for high-voltage applications.
What Problem Does This Paper Address?
Epoxy resins are crucial insulating materials in high-voltage direct current (HVDC) systems, particularly in converter transformer bushings. However, neat epoxy resins are brittle, making them susceptible to cracking under stress. While various toughening methods exist, understanding their impact on dielectric properties is vital for ensuring the long-term reliability and safety of these components. Specifically, this paper addresses the need to quantitatively dissect the dielectric relaxation processes in toughened epoxy composites and understand how the concentration of a specific plasticizer, polyethylene glycol diglycidyl ether (PEGDGE), influences these processes and their associated activation energies. This knowledge is essential for tailoring material properties for optimal performance in demanding electrical environments.
Methods
The researchers employed a multi-pronged approach:
- Differential Scanning Calorimetry (DSC): Used to determine the glass transition temperature (Tg) of the epoxy composites. This provides insight into molecular mobility and how it's affected by the plasticizer.
- Broadband Dielectric Spectroscopy (BDS): This was the core technique, measuring the complex dielectric permittivity (real and imaginary parts) over a wide frequency range (10⁻¹ to 10⁶ Hz) and at various temperatures. This allowed for the identification of different relaxation processes.
- Complex Electric Modulus Analysis: The dielectric data was further analyzed using the complex electric modulus to better isolate relaxation processes from electrode polarization effects, especially at low frequencies.
- Dielectric Relaxation Modeling: The Havriliak-Negami (HN) model was used to fit the dielectric data, allowing for the quantitative description of relaxation processes. For samples exhibiting multiple relaxation events, a model incorporating two HN functions was employed.
- Activation Energy Analysis: The temperature dependence of the relaxation time constants (obtained from both the complex modulus peaks and the HN model fitting) was analyzed using the Arrhenius equation to determine the activation energies associated with each relaxation process.
- DC Conductivity Analysis: The DC conductivity was measured and analyzed using both the Arrhenius and Vogel-Fulcher-Tammann (VFT) models to understand charge transport mechanisms.
Datasets
Not discussed in the paper. The study generated its own experimental data through dielectric spectroscopy and DSC measurements on prepared epoxy composite samples.
Key Insights and Ideas
- Plasticizer-Induced Tg Reduction: The addition of PEGDGE significantly lowers the glass transition temperature (Tg) of the epoxy composites. This is attributed to increased molecular mobility, making the material more flexible. However, at higher concentrations, the plasticizer's effect on Tg reduction plateaus, suggesting it might also limit chain segment motion to some extent.
- Multiple Relaxation Regimes: The study clearly identified three distinct dielectric relaxation regimes:
- α-relaxation: Associated with the primary molecular motion of the polymer chains, typically observed below Tg.
- Epoxy/PEGDGE Interfacial Polarization: Arises from charge accumulation at the interfaces between the epoxy matrix and the PEGDGE plasticizer.
- Epoxy/Paper Interfacial Polarization: Specific to the paper-reinforced composites (EIP), this involves charge accumulation at the interface between the epoxy and the paper substrate.
- Activation Energy as a Tunable Parameter: The activation energy for each relaxation process was found to be significantly modulated by the PEGDGE content. This is a crucial finding, as it demonstrates a direct way to engineer the material's response to electrical and thermal stresses.
- PEGDGE as a "Smart" Modifier: The study highlights PEGDGE's potential as a sustainable toughening agent, noting its bio-based origin and reduced wastewater generation during synthesis. Its ability to tune dielectric properties alongside mechanical ones makes it a promising candidate for advanced electrical insulation.
- Interfacial Polarization Dominance in EIP: In the epoxy-impregnated paper (EIP) systems, the epoxy/paper interfacial polarization plays a significant role, contributing a distinct relaxation process with a lower activation energy compared to the epoxy/PEGDGE interface.
Key Results
- Tg Reduction: For neat epoxy, Tg decreased from 102 °C (10% PEGDGE) to 48.8 °C (50% PEGDGE). Similar trends were observed for EIP samples.
- Activation Energies:
- α-relaxation (HN1 model): 82.01–87.80 kJ/mol.
- Epoxy/PEGDGE interfacial polarization (HN2 model): 55.96–64.64 kJ/mol.
- Epoxy/paper interfacial polarization (HN2 model in EIP): 30.88–44.38 kJ/mol.
- DC Conductivity: DC conductivity increased with PEGDGE content, attributed to increased impurity ions and free chain segments enhancing carrier mobility. The conductivity followed Arrhenius behavior at lower PEGDGE content and VFT behavior at higher concentrations.
- Mechanical Properties: Elongation at break increased significantly with PEGDGE content, indicating improved ductility and toughness.
Limitations and Future Work
- Fitting Limitations: The paper acknowledges that fitting the imaginary part of the complex dielectric constant (ɛ") can be challenging at low frequencies and high temperatures due to electrode polarization and the presence of multiple relaxation processes. The fitting was poorer in these regimes.
- Electrode Polarization: While the complex electric modulus helped mitigate electrode polarization effects, it was still noted as a factor influencing the analysis, particularly at low frequencies.
- Future Work: The authors propose to integrate this dielectric characterization data into a finite element (FE) model of converter transformer valve-side bushings. This will allow for a systematic investigation of electro-thermal coupling effects and provide engineering insights for optimized manufacturing and maintenance.
Summary updated