Quantifying Adsorption of Organic Molecules on Platinum in Aqueous Phase by Hydrogen Site Blocking and in Situ X-ray Absorption Spectroscopy

Nirala Singh, Udishnu Sanyal, John L. Fulton, Oliver Y. Gutiérrez, Johannes A. Lercher, Charles T. CampbellACS 2019 · DOI

TL;DR

This paper introduces a clever method using cyclic voltammetry to quantify how strongly organic molecules like phenol and benzaldehyde stick to platinum surfaces in water. By observing how these molecules block hydrogen adsorption, the researchers determined their adsorption energies and found that solvation in water significantly weakens the binding compared to a vacuum.

What Problem Does This Paper Address?

Understanding how molecules interact with catalyst surfaces is crucial for designing efficient chemical reactions, especially in aqueous environments which are increasingly important for sustainable chemistry. However, directly measuring adsorption energies of organic molecules on metal catalysts in liquid water is challenging. Traditional methods often rely on vacuum conditions, which don't accurately reflect real-world catalytic processes. This paper tackles the problem of quantifying these adsorption behaviors in aqueous solutions, focusing on platinum (Pt) as a model catalyst and common organic molecules found in biomass conversion.

Methods

The core of the methodology lies in a clever application of cyclic voltammetry (CV). The researchers used CV to measure the amount of hydrogen that can adsorb onto a platinum surface (underpotential deposition, Hupd). When organic molecules are present, they compete for these adsorption sites, reducing the amount of hydrogen that can bind. By quantifying this reduction in Hupd, the researchers could indirectly determine the surface coverage of the organic molecules.

This CV data was then analyzed using a Temkin adsorption model, which accounts for the fact that adsorption energy can change with surface coverage. To further validate their findings and probe the nature of the adsorbed species, they employed in situ X-ray absorption spectroscopy (XAS), specifically X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure (EXAFS). XANES provided information about the electronic state of Pt, while EXAFS helped identify the presence and distance of Pt-C bonds, confirming the formation of these bonds upon organic adsorption.

Datasets

Not discussed in the paper. The study relies on experimental measurements rather than pre-existing datasets for training or evaluation.

Key Insights and Ideas

  • Water's Weakening Effect: The most striking insight is how significantly water molecules and solvation impact the adsorption of organic molecules on platinum. Adsorption enthalpies in water are considerably weaker than in vacuum, suggesting that the strong interactions of the organic with water molecules and the Pt surface itself in solution play a dominant role.
  • Hydrogen Blocking as a Quantitative Tool: The paper demonstrates that the inhibition of hydrogen adsorption by organic molecules is not just a qualitative observation but a robust quantitative method for determining organic coverage and adsorption strength.
  • Facet-Dependent Adsorption: The study highlights that different crystal facets of platinum (e.g., (110)/(100) vs. (111)) exhibit distinct adsorption behaviors, with aromatic molecules binding more strongly to the (110) and (100) facets.
  • Aromaticity Matters: The sequence of adsorption strength (benzaldehyde > benzyl alcohol > phenol > cyclohexanol) clearly points to the importance of the aromatic ring in interacting with the platinum surface.

Key Results

  • Adsorption Enthalpies: The adsorption enthalpies for phenol on Pt(111) were found to be around -21 kJ/mol, significantly less negative than the -200 kJ/mol observed in vacuum. For (110)/(100)-like sites, it was around -41 kJ/mol.
  • Adsorption Strength Order: The order of adsorption strength was determined as benzaldehyde > benzyl alcohol > phenol > cyclohexanol.
  • Pt-C Bond Formation: XAS confirmed the formation of Pt-C bonds for all studied organic molecules, indicating a chemical interaction rather than just physisorption.
  • Model Validation: The CV-derived adsorption isotherms and energies showed good agreement with literature data for phenol in sulfuric acid, validating the approach.

Limitations and Future Work

  • Identical Conditions: The authors acknowledge that ideally, CV and XAS measurements should be performed under identical conditions. However, differences in potential and particle size (wire vs. nanoparticles) were noted, though they found good agreement in the relative adsorption trends.
  • Low Loading Challenges: For Pt/C catalysts with low metal loadings, the CV signal for Hupd can be obscured by the carbon support, making this technique less reliable.
  • Vibrational Spectroscopy: The authors suggest that future work could benefit from vibrational spectroscopy (e.g., ATR-IR or Raman) on unsupported metal films to provide complementary information on coverage and orientation, which XANES/EXAFS are less suited for.
  • Other Metals: The technique's applicability to other metals that exhibit Hupd (like Pd, Rh, Ir) could be explored, potentially using single-crystal electrodes to overcome the lack of clear facet differentiation in their CVs.

Summary updated

Abstract

The adsorption equilibrium constants of phenol, benzaldehyde, cyclohexanol, and benzyl alcohol on Pt in aqueous phase have been determined via cyclic voltammetry (CV) measuring the capacity to adsorb hydrogen in the presence of organic molecules. The enthalpies of adsorbed phenol on Pt in aqueous phase estimated by this technique were approximately −41 and −21 kJ/mol relative to aqueous phenol for (110)/(100)-like sites and (111) facets, respectively. The enthalpy of phenol aqueous adsorption on (111) (−21 kJ/mol) can be compared to the gas-phase enthalpy of adsorption of phenol on single-crystal Pt(111) from previous work (−200 kJ/mol) to understand the individual factors influencing adsorption in the liquid phase. The results show that adsorbates with very strong intrinsic bonding at a gas/solid interface have markedly reduced adsorption enthalpy due to strong solvation of both the Pt surface and the organic. Using the CV method, the decrease of the heat of adsorption in the sequence benzaldehyde > benzyl alcohol > phenol > cyclohexanol points to a strong interaction of the aromatic ring with the metal surface. Combining CV and X-ray absorption spectroscopy, we show that the inhibition of hydrogen adsorption by organic molecules is a suitable method of determining the coverage of organic reactants and that these molecules have defined Pt–C bonds in the adsorbed state.
BibTeX
@inproceedings{singh2019quantifying,
  author = {Nirala Singh and Udishnu Sanyal and John L. Fulton and Oliver Y. Gutiérrez and Johannes A. Lercher and Charles T. Campbell},
  title = {{Quantifying Adsorption of Organic Molecules on Platinum in Aqueous Phase by Hydrogen Site Blocking and in Situ X-ray Absorption Spectroscopy}},
  booktitle = {ACS},
  year = {2019},
  doi = {10.1021/acscatal.9b01415},
}

Loading related content...

Figure