Pulsed Laser-Bleaching Semiconductor and Photodetector

Chen Huang, Fei Chen, Ze Zhang, Xin Tang, Meng Zhu, Junjie Sun, Yi Chen, Xin Zhang, Jinghua Yu, Yiwen ZhangSensors 2024 · DOI

TL;DR

This paper presents a theoretical model for pulsed laser-induced bleaching in semiconductors and photodetectors, offering a comprehensive analysis across various materials and spectral ranges. The work provides crucial laser parameters for achieving continuous bleaching, paving the way for enhanced applications in infrared detection, biological imaging, and sensing.

What Problem Does This Paper Address?

Pulsed lasers can significantly alter the optical properties of semiconductors, leading to a phenomenon called "bleaching." This transient change, where the material's ability to absorb light is temporarily reduced, has important implications for controlling and interfering with photodetector performance. While experimental studies have explored ultrafast carrier dynamics during bleaching, theoretical models have lagged behind, particularly for photodetectors which are influenced by external electromagnetic fields. Existing theoretical work often focuses on specific materials or laser types, lacking a unified approach for a broad range of semiconductors and photodetectors across the visible to long-wave infrared (LWIR) spectrum. This paper aims to bridge this gap by developing a theoretical framework and simulating the bleaching effect for a diverse set of materials.

Methods

The authors developed a carrier dynamics model based on the rectified carrier drift-diffusion model to simulate the pulsed laser bleaching effect. This model was then solved using the finite-difference time-domain (FDTD) method. For semiconductors, the model incorporates equations describing spectral absorption coefficients and carrier densities, considering factors like phonon interactions and effective masses. For photodetectors, the model extends the semiconductor equations by including Poisson's equation and carrier continuity equations, accounting for the influence of applied bias voltage and external circuitry. The researchers then used these models to predict the temporal variations in carrier concentrations and absorption coefficients for various semiconductor materials and photodetector types. Finally, they calculated the necessary laser parameters (energy density, pulse duration, and repetition rate) to achieve continuous bleaching for these devices.

Datasets

Not discussed in the paper. The study relies on established material parameters for semiconductors and photodetectors, sourced from various literature references (e.g., Table 1).

Key Insights and Ideas

  • Unified Bleaching Model: The paper proposes a single theoretical framework that can be applied to a wide range of semiconductor materials and photodetectors, unifying the understanding of pulsed laser bleaching across different spectral bands (VNIR to LWIR).
  • Photodetector Specifics: The model highlights that photodetectors exhibit significantly longer bleaching durations compared to bulk semiconductors, primarily due to the influence of external electric fields and circuitry on carrier relaxation times. This suggests that photodetectors offer more flexibility in terms of laser repetition rates for bleaching.
  • Bandgap-Wavelength Correlation: A clear correlation is observed between the semiconductor's bandgap and the required laser energy for bleaching. As the wavelength increases (redshift), the bandgap decreases, requiring less energy to excite electron transitions and achieve bleaching.
  • Continuous Bleaching Parameters: The study provides concrete laser parameters (energy density, pulse duration, repetition rate) for achieving continuous bleaching in various materials, which is crucial for practical applications.
  • Experimental Validation (Partial): While primarily theoretical, the paper notes that the simulation results for silicon and GaAs surface carrier concentrations align with trends observed in existing experimental data, lending credibility to the proposed model.

Key Results

  • The model successfully simulates the pulsed laser bleaching effect on seven types of semiconductors and photodetectors: silicon, GaAs, Ge, InAs, InSb, HgCdTe, and InAs$_{0.4}$Sb$_{0.6}$.
  • For VNIR materials like silicon and GaAs, bleaching depths are typically in the micron scale, with carrier concentrations peaking and then decreasing as the material becomes bleached.
  • Photodetectors made from these materials show bleaching durations that are orders of magnitude longer than their bulk semiconductor counterparts.
  • The required laser energy density for bleaching decreases significantly with increasing wavelength, with LWIR materials like HgCdTe and InAs$_{0.4}$Sb$_{0.6}$ requiring very low energy densities (e.g., 0.0005 mJ/cm² for HgCdTe).
  • Continuous bleaching of photodetectors can be achieved with repetition rates in the MHz range and pulse durations up to the nanosecond scale, offering a more relaxed operational window compared to bulk semiconductors.

Limitations and Future Work

  • Theoretical Focus: The paper is primarily theoretical, with limited direct experimental validation presented for all simulated materials and conditions.
  • Defect Simplification: The authors acknowledge that intrinsic defects in semiconductors can introduce complex scattering and trapping mechanisms that affect relaxation dynamics. While they mention this, a comprehensive analysis of defect-induced effects is not undertaken to simplify the model.
  • Future Work: The authors suggest that the developed bleaching model and calculated laser parameters are essential for enabling new applications in infrared detection, biological imaging, and sensing. Further experimental verification and exploration of defect-induced effects could enhance the model's predictive power.

Summary updated

Abstract

Pulsed lasers alter the optical properties of semiconductors and affect the photoelectric function of the photodetectors significantly, resulting in transient changes known as bleaching. Bleaching has a profound impact on the control and interference of photodetector applications. Experiments using pump-probe techniques have made significant contributions to understanding ultrafast carrier dynamics. However, there are few theoretical studies to the best of our knowledge. Here, carrier dynamic models for semiconductors and photodetectors are established, respectively, employing the rectified carrier drift-diffusion model. The pulsed laser bleaching effect on seven types of semiconductors and photodetectors from visible to long-wave infrared is demonstrated. Additionally, a continuous bleaching method is provided, and the finite-difference time-domain (FDTD) method is used to solve carrier dynamic theory models. Laser parameters for continuous bleaching of semiconductors and photodetectors are calculated. The proposed bleaching model and achieved laser parameters for continuous bleaching are essential for several applications using semiconductor devices, such as infrared detection, biological imaging, and sensing.
BibTeX
@inproceedings{huang2024pulsed,
  author = {Chen Huang and Fei Chen and Ze Zhang and Xin Tang and Meng Zhu and Junjie Sun and Yi Chen and Xin Zhang and Jinghua Yu and Yiwen Zhang},
  title = {{Pulsed Laser-Bleaching Semiconductor and Photodetector}},
  booktitle = {Sensors},
  year = {2024},
  doi = {10.3390/s24134226},
}

Loading related content...

Figure