PT/P(VDF-TrFE) 0-3 nanocomposite thin film pyroelectric sensors

Yannan Chen, J. Li, H.l.w. Chan, C.l. Choy, Raymond Kai‐Yu TongJournal de Physique IV (Proceedings) 1998 · DOI

Abstract

he performances of four different pyroelectric single-element sensor configurations have been evaluated. The sensing element is either a composite of nanometer-size particles of lead titanate (PT) embedded in vinylidene-trifluoroethylene [P(VDF-TrFE)] copolymer or P(VDF-TrFE). Configuration I consists of the sensing element spin-coated on a silicon substrate. Configuration II, comprising the same sensing element but with the substrate etched away, has voltage (R v ) and current (R i ) sensitivities which, at an incident radiation modulation frequency of 10 - 100 Hz, are more than one order of magnitude higher than those of configuration I. High Rv and R 1 can also be achieved by depositing a 13 μm thick polyimide (PI) thermal buffer layer between the sensing element and the silicon substrate (configuration III). Configuration IV, fabricated by etching away the substrate of configuration III, has similar R v and R l values as configuration II if the thickness of the PI layer is below 2.3 μm. Moreover, configuration IV is mechanically more robust than configuration II. For each configuration, the PT/P(VDF-TrFE) nanocomposite sensor has higher voltage and current sensitivities than the copolymer sensor.
BibTeX
@article{chen1998pt,
  author = {Yannan Chen and J. Li and H.L.W. Chan and C.L. Choy and Raymond Kai‐Yu Tong},
  title = {{PT/P(VDF-TrFE) 0-3 nanocomposite thin film pyroelectric sensors}},
  journal = {Journal de Physique IV (Proceedings)},
  year = {1998},
  doi = {10.1051/jp4:1998924},
}

Loading related content...

Figure