Pseudo-Steady-State Parameters for a Well Penetrated by a Fracture with an Azimuth Angle in an Anisotropic Reservoir

Guoqiang Xing, Mingxian Wang, Shuhong Wu, Hua Li, Jiangyan Dong, Wenqi ZhaoEnergies 2019 · DOI

TL;DR

This paper develops a new analytical model to understand how fractures at different angles in anisotropic oil reservoirs affect long-term production (pseudo-steady-state). It reveals that the optimal fracture direction is perpendicular to the main flow direction, and introduces a novel method to calculate the pseudo-skin factor, crucial for assessing well productivity.

What Problem Does This Paper Address?

Many oil and gas wells in closed reservoirs produce for extended periods under "pseudo-steady-state" (PSS) flow conditions. Understanding this phase is vital for accurately predicting production and estimating reserves. However, existing models often simplify reservoir complexities like permeability anisotropy (where fluid flows more easily in one direction than another) and the orientation of hydraulic fractures. This paper tackles the challenge of modeling PSS flow for wells with finite-conductivity fractures in anisotropic rectangular reservoirs, specifically considering the fracture's azimuth angle (its orientation relative to the reservoir's principal permeability axes). The goal is to better characterize PSS flow parameters like the pseudo-steady-state constant and pseudo-skin factor, which are key to understanding well performance and optimizing production strategies.

Methods

The authors developed a comprehensive analytical solution for the pressure response of a well with a finite-conductivity fracture in an anisotropic rectangular reservoir. This was achieved by:

  • Point-Source Function and Spatial Integral Method: They first derived an unsteady-state pressure solution using these established techniques, carefully handling the anisotropic nature of the reservoir without resorting to coordinate transformations that might distort the reservoir geometry.
  • Asymptotic Analysis: To transition from the unsteady-state to the PSS regime, they employed asymptotic analysis. This allowed them to derive explicit expressions for the pseudo-steady-state constant ($b_{Dpss}$) and the pseudo-skin factor ($S$).
  • New Pseudo-Skin Factor Formula: A key contribution is a new formula for calculating the pseudo-skin factor, derived from the relationship between the pseudo-steady-state constant and the pseudo-skin factor.
  • Blasingame Format Decline Curves: As a practical application, they generated Blasingame format rate decline curves, which are widely used for well test analysis and reserve estimation.

Datasets

Not discussed in the paper. The study relies on theoretical modeling and numerical simulations based on established physical principles.

Key Insights and Ideas

  • Optimal Fracture Orientation: The study confirms that in anisotropic reservoirs, the most effective fracture direction for maximizing production is perpendicular to the principal permeability axis. This is a crucial finding for hydraulic fracturing design.
  • Symmetry and Shape: Both the pseudo-steady-state constant and pseudo-skin factor curves exhibit symmetry around a 90° fracture azimuth angle, forming distinct "hump" or "groove" shapes depending on the permeability anisotropy.
  • Pseudo-Skin Factor as a Diagnostic Tool: The pseudo-skin factor, unlike the pseudo-steady-state constant, can directly indicate the effectiveness of stimulation. Negative values suggest improved productivity compared to a fracture aligned with the primary flow direction.
  • Fracture Conductivity's Limited PSS Impact: While fracture conductivity significantly influences early-time flow, its effect on the pseudo-steady-state regime is minimal. This suggests that optimizing for PSS flow might not require extremely high fracture conductivities.
  • Reservoir Shape's Minor Influence on Optimization: While reservoir shape affects the magnitude of PSS parameters, it has little impact on determining the optimal fracture direction, which is primarily dictated by permeability anisotropy.
  • New Pseudo-Skin Factor Calculation: The derived formula for the pseudo-skin factor, based on the relationship with the pseudo-steady-state constant, offers a potentially simpler and more reliable method for its calculation.

Key Results

  • An analytical solution for wellbore pressure in anisotropic reservoirs with fractured wells was developed and validated against existing literature, showing excellent agreement.
  • Expressions for pseudo-steady-state constant and pseudo-skin factor were derived, revealing their dependence on permeability anisotropy, fracture azimuth angle, fracture conductivity, and reservoir shape.
  • The study found that the optimized fracture direction is consistently perpendicular to the principal permeability axis, regardless of reservoir shape, but its effectiveness is influenced by permeability anisotropy.
  • A new formula for calculating the pseudo-skin factor was proposed and validated, showing good agreement with the definition-based calculation.
  • Blasingame format rate decline curves were generated, illustrating five distinct flow regimes and demonstrating the influence of various parameters on production behavior.

Limitations and Future Work

  • Assumptions: The model relies on several assumptions, including a homogeneous reservoir, single-phase slightly compressible fluid flow, and neglecting gravity effects. Real-world scenarios might deviate from these.
  • Rectangular Reservoir: The current model is specific to rectangular reservoirs. Extending it to other reservoir geometries (e.g., circular) would enhance its applicability.
  • Complex Fractures: The study focuses on a single finite-conductivity fracture. Future work could explore the impact of complex fracture networks or multiple fractures.
  • Numerical Inversion: While the Stehfest method was used for numerical inversion, its accuracy can sometimes be sensitive to parameter choices.
  • Future Work: The authors suggest further research into the impact of complex fracture networks, different reservoir shapes, and the application of these findings to real field data for well test interpretation and production optimization.

Summary updated

Abstract

Many oil wells in closed reservoirs continue to produce in the pseudo-steady-state flow regime for a long time. The principal objective of this work is to investigate the characteristics of two key pseudo-steady-state parameters—pseudo-steady-state constant (bDpss) and pseudo-skin factor (S)—for a well penetrated by a fracture with an azimuth angle (θ) in an anisotropic reservoir. Firstly, a general analytical pressure solution for a finite-conductivity fracture with or without an azimuth angle in an anisotropic rectangular reservoir was developed by using the point-source function and spatial integral method, and two typical cases were employed to verify this solution. Secondly, with the asymptotic analysis method, the expressions of pseudo-steady-state constant and pseudo-skin factor were obtained on the basis of their definitions, and the effects of permeability anisotropy, fracture azimuth angle, fracture conductivity and reservoir shape on them were discussed in detail. Results show that all the bDpss-θ and S-θ curves are symmetric around the vertical line, θ = 90° and form a hump or groove shape. The optimized fracture direction in an anisotropic reservoir is perpendicular to the principal permeability axis. Furthermore, a new formula to calculate pseudo-skin factor was successfully proposed based on these two parameters’ relationship. Finally, as an application of pseudo-steady-state constant, a set of Blasingame format rate decline curves for the proposed model were established.
BibTeX
@inproceedings{xing2019pseudo,
  author = {Guoqiang Xing and Mingxian Wang and Shuhong Wu and Hua Li and Jiangyan Dong and Wenqi Zhao},
  title = {{Pseudo-Steady-State Parameters for a Well Penetrated by a Fracture with an Azimuth Angle in an Anisotropic Reservoir}},
  booktitle = {Energies},
  year = {2019},
  doi = {10.3390/en12122449},
}

Loading related content...

Figure