Progress of graphene growth on copper by chemical vapor deposition: Growth behavior and controlled synthesis

Lai‐Peng Ma, Wencai Ren, Zaili Dong, Lianqing Liu, Hui–Ming ChengChinese 2012 · DOI

Abstract

Chemical vapor deposition (CVD) on copper (Cu) has emerged as the primary methodology for the production of large-area, high-quality monolayer graphene. This paper reviews the fundamental growth behaviors of graphene on Cu substrates, focusing on recent advancements in quality enhancement, layer-number control, and transfer-free synthesis. We analyze the transition from polycrystalline growth to the development of large-scale single-crystal graphene and the challenges associated with controlled bilayer stacking.

Introduction

Since its discovery, graphene has promised a revolution in electronics and materials science due to its exceptional carrier mobility and thermal conductivity. However, bridging the gap between theoretical performance and industrial-scale production remains a significant challenge. Early attempts at large-scale synthesis utilized nickel (Ni) substrates, but the high carbon solubility of Ni led to non-uniform, multi-layer graphene. The shift toward copper (Cu) substrates marked a turning point in the field, leveraging Cu's low carbon solubility to achieve self-limiting, monolayer growth.

The Self-Limiting Mechanism of Copper

The primary advantage of copper over other transition metals is its surface-mediated growth mechanism. Unlike nickel, where carbon dissolves into the bulk and precipitates upon cooling, copper facilitates a "self-limiting" adsorption process. Once the catalytic surface of the copper is covered by a single layer of carbon atoms, the catalytic activity drops significantly, preventing further growth. This behavior naturally favors the formation of high-uniformity monolayers, making Cu the gold standard for large-area synthesis.

Engineering the Growth Environment

To reach the theoretical limits of graphene's performance, researchers have focused on optimizing the CVD environment and substrate preparation through several key strategies:

Substrate Crystallinity and Surface Morphology

The orientation of the copper substrate plays a critical role in the quality of the resulting graphene. Low-index facets, particularly Cu(111), provide a lattice-matched surface that minimizes misorientation between graphene grains. Furthermore, techniques such as electropolishing or high-temperature annealing are employed to create ultra-smooth surfaces, reducing nucleation density and minimizing structural defects.

The Dual Role of Hydrogen

Hydrogen serves a complex, dual purpose in the CVD process. It acts as a co-catalyst that aids in the dissociation of methane (the carbon source) on the copper surface. Simultaneously, hydrogen acts as an etchant that removes weak carbon bonds and amorphous carbon defects. Balancing the hydrogen-to-methane ratio is essential; excessive hydrogen can degrade graphene edges and introduce wrinkles, while insufficient hydrogen leads to poor crystallinity.

Advancements in Grain Size and Mobility

A major hurdle in CVD graphene is the presence of grain boundaries—line defects where different graphene crystals meet. These boundaries scatter electrons, significantly reducing carrier mobility.

  • Grain Expansion: By utilizing "enclosure" growth methods (e.g., growing inside folded Cu foils) to control the local vapor pressure, researchers have increased grain sizes from a few micrometers to over 500 μm.
  • Electrical Performance: While early CVD graphene exhibited modest mobilities, optimized processes using polished Cu and controlled cooling have pushed these values closer to those of exfoliated flakes, reaching several thousand $cm^2 V^{-1} s^{-1}$ in high-quality samples.

Controlled Synthesis: Bilayers and Transfer-Free Growth

Recent progress has moved beyond simple monolayers. Controlling the growth of bilayer graphene is vital for electronic applications, as AB-stacked bilayers can exhibit a tunable bandgap. By manipulating methane concentrations and cooling rates, coverage of AB-stacked bilayers has reached approximately 67%.

Additionally, to avoid the damage and contamination associated with traditional "wet" transfer processes, "transfer-free" synthesis methods are being developed. These include growing graphene directly at the interface between metal films and dielectric wafers or evaporating the metal substrate post-growth.

Conclusion and Future Directions

While CVD on copper has revolutionized graphene production, several challenges remain. Achieving wafer-scale, single-crystal graphene—entirely free of grain boundaries—is the ultimate goal for high-end electronics. Furthermore, achieving precise control over stacking orders (such as twisted vs. AB-stacking) in multilayer systems remains a frontier for future research. As synthesis techniques continue to mature, the focus shifts from mere production to the atomic-level precision required for the next generation of carbon-based technologies.

Summary updated

Abstract

Recently, chemical vapor deposition (CVD) on copper has been becoming a main method for preparing large-area and high- quality monolayer graphene. In this paper, we first briefly introduce the preliminary understanding of the microstructure and growth behavior of graphene on copper, and then focus on the recent progress on the quality improvement, number of layers control and transfer-free growth of graphene. In the end, we attempt to analyze the possible development of CVD growth of graphene in future, including the controlled growth of large-size single-crystal graphene and bilayer graphene with different stacking orders.
BibTeX
@inproceedings{ma2012progress,
  author = {Lai‐Peng Ma and Wencai Ren and Zaili Dong and Lianqing Liu and Hui–Ming Cheng},
  title = {{Progress of graphene growth on copper by chemical vapor deposition: Growth behavior and controlled synthesis}},
  booktitle = {Chinese},
  year = {2012},
  doi = {10.1007/s11434-012-5335-4},
}
Figure