Progress in the development of the ITER baseline scenario in TCV

B. Labit, O. Sauter, T. Pütterich, F. Bagnato, Y. Camenen, S. Coda, C. Contré, Reinart Coosemans, F. Eriksson, O. Février, E. Fransson, A. Karpushov, O. Krutkin, S. Marchioni, A. Merle, A. Pau, L. Piron, M. Vallar, S. Van Mulders, I. Voitsekhovitch, the Tcv teamPlasma 2024 · DOI

TL;DR

Researchers have successfully developed and analyzed the ITER baseline (IBL) scenario on the TCV tokamak, achieving key performance targets relevant for future fusion reactors. The study highlights the critical role of plasma shaping, particularly triangularity, in influencing edge instabilities (ELMs) and the subsequent onset of disruptive magnetohydrodynamic (MHD) modes like neoclassical tearing modes (NTMs).

What Problem Does This Paper Address?

The development of a stable and high-performance plasma scenario is crucial for the success of fusion energy. The ITER baseline (IBL) scenario is designed to achieve a fusion power gain (Q) of 10, requiring specific plasma parameters like high elongation, triangularity, and normalized beta ($\beta_N$). However, achieving these conditions in current tokamaks presents challenges, particularly concerning plasma stability and confinement. This paper addresses the problem of developing and understanding the IBL scenario on the TCV tokamak, focusing on how to achieve ITER-relevant performance while mitigating disruptive instabilities. Specifically, it investigates the interplay between plasma shape, edge localized modes (ELMs), and the onset of neoclassical tearing modes (NTMs), which are known to degrade confinement and can lead to disruptions.

Methods

The researchers employed a multi-phase strategy to develop the IBL scenario on TCV. This involved:

  • Phased Plasma Operation: The H-mode was initiated at higher safety factors ($q_{95}$) and reduced shaping, gradually transitioning to the target IBL shape and plasma current. This approach aimed to manage ELMs and avoid early disruptions.
  • Shape Optimization: TCV's advanced shaping capabilities were used to reproduce ITER-relevant plasma shapes, including high triangularity, and compare them with results from other tokamaks like AUG and JET.
  • ECRH Heating: Electron Cyclotron Resonance Heating (ECRH) was used as a tool to investigate its impact on NTM stability, particularly with central X3 heating.
  • Disruption Analysis: A machine-agnostic framework (DEFUSE) was utilized to analyze the causes of disruptions, employing physics-based scalings and machine learning approaches.
  • Integrated Modeling: The ASTRA-GLF23 and GENE codes were used for integrated modeling of heat and particle transport, and micro-turbulence stability analysis, respectively.

Datasets

The study utilized experimental data from discharges performed on the TCV tokamak. No new benchmark datasets were introduced.

Key Insights and Ideas

  • Triangularity's Double-Edged Sword: Higher triangularity, crucial for improving pedestal pressure and confinement, also leads to larger ELMs and makes it harder to achieve stable, stationary states at low $q_{95}$.
  • NTMs as the Primary Limiter: The performance of the TCV IBL scenario is primarily limited by neoclassical tearing modes (NTMs), particularly 2/1 modes, which are often triggered by large ELM crashes.
  • ELM Period and $\beta_N$ Correlation: A shorter ELM period (the time between large ELMs) directly correlates with a higher achievable $\beta_N$ before NTM onset, suggesting that ELM control is key to preventing NTMs.
  • ECRH as an NTM Suppressor: Central X3 ECRH heating was shown to be effective in avoiding NTM onset, especially at relatively high $q_{95}$ and moderate $\beta_N$.
  • Density Peaking and MHD Instability: Peaked density profiles, often observed in TCV IBL scenarios, flatten temperature profiles and broaden the current density profile, making the plasma more susceptible to MHD instabilities like NTMs.
  • Disruption Causes: Vertical stability control issues were identified as the primary cause of disruptions (around 70%), often linked to the coupling of large ELMs with rotating NTMs leading to Vertical Displacement Events (VDEs).
  • Transport Modeling Success: Integrated transport modeling using ASTRA-GLF23 successfully predicted heat and particle transport, including the significant density peaking, with Ion Temperature Gradient (ITG) modes identified as the dominant instability in the core plasma.

Key Results

  • TCV successfully reproduced three ITER-relevant shapes: JET, AUG, and the ITER IBL shape.
  • The TCV IBL database achieved ITER target values of $H_{98y2} \sim 1$ and $\beta_N \sim 1.8$ at $q_{95} \sim 3$, with slightly better confinement than required for ITER.
  • NTMs were observed to trigger at $\beta_N$ values around 1.2-1.8, often after large ELMs.
  • Central X3 ECRH heating was demonstrated to prevent 2/1 NTMs in certain conditions.
  • Integrated modeling accurately reproduced density peaking and identified ITG modes as the dominant instability.

Limitations and Future Work

  • Duration of High Performance: The duration of high performance in low $q_{95}$ TCV IBL scenarios is limited to about four confinement times due to density peaking and the subsequent triggering of NTMs. This is attributed to the lack of significant ECH at the high central densities achieved.
  • Termination Strategy Optimization: While initial tests for safe plasma termination using RAPTOR simulations have been performed, further optimization is needed.
  • Future Experiments: Future campaigns will utilize a second X3 gyrotron and a second NBI, along with impurity seeding for detachment studies, to further advance the IBL scenario development on TCV. The aim is to continue to mutually feed developments with other devices like AUG.

Summary updated

Abstract

Abstract Under the auspices of EUROfusion, the ITER baseline (IBL) scenario has been jointly investigated on AUG and TCV in the past years and this paper reports on the developments on TCV. Three ITER shapes, namely the JET, AUG and ITER IBL have been reproduced in TCV, illustrating that the higher the triangularity the larger the ELM perturbation and the more difficult it is to reach stationary states with q 95 &lt; 3.6. It is found that the performance of TCV IBL is mainly limited by (neoclassical) tearing modes, in particular 2/1 modes which are triggered after a large ELM. It is demonstrated that the shorter the ELM period the larger β N at the NTM onset. We show that these modes can be avoided with central X3 EC heating at relatively high q 95 and moderate β N . However, the lack of significant ECH at the high central densities obtained in TCV IBL scenario limits the duration of low q 95 cases to about four confinement times. During this time, density usually keeps peaking until (neoclassical) tearing modes are triggered. Nevertheless, the TCV IBL database covers the ITER target values ( <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" overflow="scroll"> <mml:msub> <mml:mi>H</mml:mi> <mml:mrow> <mml:mn>98</mml:mn> <mml:mi>y</mml:mi> <mml:mn>2</mml:mn> </mml:mrow> </mml:msub> <mml:mo>∼</mml:mo> </mml:math> 1, <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" overflow="scroll"> <mml:msub> <mml:mi>β</mml:mi> <mml:mi>N</mml:mi> </mml:msub> <mml:mo>∼</mml:mo> </mml:math> 1.8 at <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" overflow="scroll"> <mml:msub> <mml:mi>q</mml:mi> <mml:mrow> <mml:mn>95</mml:mn> </mml:mrow> </mml:msub> <mml:mo>∼</mml:mo> </mml:math> 3) and a slightly better confinement than requested for ITER is reported. Integrated modelling results show that ITG modes are the dominant instabilities, and show that, in TCV, fuelling also plays a role to sustain peaked density profiles. The role of profiles, sawteeth and ELMs regarding MHD stability are also discussed.
BibTeX
@inproceedings{labit2024progress,
  author = {B. Labit and O. Sauter and T. Pütterich and F. Bagnato and Y. Camenen and S. Coda and C. Contré and Reinart Coosemans and F. Eriksson and O. Février and E. Fransson and A. Karpushov and O. Krutkin and S. Marchioni and A. Merle and A. Pau and L. Piron and M. Vallar and S. Van Mulders and I. Voitsekhovitch and the TCV team and the MST1 team and the EUROfusion tokamak exploitation team},
  title = {{Progress in the development of the ITER baseline scenario in TCV}},
  booktitle = {Plasma},
  year = {2024},
  doi = {10.1088/1361-6587/ad1a40},
}
Figure