Progress in Research and Application of Micro-Laser-Induced Breakdown Spectroscopy

Lanxiang Sun, Wei Wang, Xue-yong Tian, Peng Zhang, Lifeng Qi, Liming ZhengChinese 2018 · DOI

TL;DR

This review paper explores the advancements and applications of micro-laser-induced breakdown spectroscopy (µLIBS), a technique for analyzing tiny sample areas with high spatial resolution. It highlights how µLIBS overcomes limitations of traditional microanalysis methods, offering faster, more versatile elemental analysis across diverse materials like metals, semiconductors, and biological samples.

What Problem Does This Paper Address?

Microanalysis, the study of chemical composition in very small sample areas, is crucial across many scientific disciplines. Traditional methods like electron probe microanalysis and scanning electron microscopy, while providing detailed information, are often expensive, require demanding test environments (like high vacuum), and are slow. Other advanced techniques such as SIMS, SPM, and SRXRM are prohibitively expensive. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is more accessible but still bulky. The paper addresses the need for a microanalysis technique that is fast, requires minimal sample preparation, can operate in ambient conditions, and offers high spatial resolution. Micro-laser-induced breakdown spectroscopy (µLIBS) emerges as a promising solution, and this paper reviews its progress and applications.

Methods

The paper delves into the fundamental principles of µLIBS, explaining how a focused laser beam ablates a tiny amount of sample material, creating a plasma. The light emitted by this plasma is then analyzed to determine elemental composition. Key aspects of the µLIBS system structure are discussed, focusing on how they influence spatial resolution:

  • Excitation Source: The paper highlights the advantages of diode-pumped solid-state (DPSS) lasers over flash lamp-pumped solid-state (FLPSS) lasers for µLIBS. DPSS lasers offer better beam quality, higher repetition rates, and higher energy conversion efficiency, which are crucial for achieving smaller ablation craters. The use of ultrashort pulse lasers (picosecond and femtosecond) is emphasized for their ability to minimize heat-affected zones and achieve "cold ablation," leading to submicron crater sizes.
  • Optics System: The integration of optical microscope systems into µLIBS setups is crucial for tight laser focusing and magnified sample observation. The paper discusses how optimizing the optical path, including using short-focal-length lenses and high-quality microscope objectives, is essential for achieving high spatial resolution. Lateral collection of plasma emission is also noted as a simpler and more effective approach for micro-area analysis.
  • Double Pulse Techniques: The review also touches upon the development of double-pulse µLIBS, which can enhance spectral signal intensity and lower detection limits compared to single-pulse methods.

Datasets

Not discussed in the paper. The paper focuses on reviewing existing research and applications rather than presenting new experimental data or datasets.

Key Insights and Ideas

  • µLIBS as a Versatile Microanalysis Tool: The paper strongly positions µLIBS as a powerful alternative to established microanalysis techniques, offering a compelling balance of speed, resolution, and accessibility.
  • The Power of Ultrashort Pulses: Femtosecond and picosecond lasers are game-changers for µLIBS, enabling "cold ablation" and achieving unprecedented spatial resolutions down to the nanometer scale, crucial for analyzing delicate structures.
  • System Design is Key to Resolution: The choice of laser source (DPSS, ultrashort pulse) and the optical path design (microscope objectives, collection methods) are critical determinants of the achievable spatial resolution and overall performance of a µLIBS system.
  • Expanding Application Horizons: µLIBS is not limited to metals; its application is rapidly growing in diverse fields, including the analysis of biological tissues, plant samples, semiconductors, and even cultural relics, demonstrating its broad utility.
  • Addressing Trace Element Detection: While µLIBS excels in spatial resolution, improving detection limits for trace elements remains an active area of research, with double-pulse techniques showing promise.

Key Results

The paper presents a comprehensive overview of µLIBS applications, showcasing its capabilities through various examples:

  • Metal Analysis: µLIBS has been successfully applied to quantitative analysis of metal elements and the study of segregation and inclusions in alloys and steels. Crater diameters as small as 5 µm have been achieved, with detection limits for some elements reaching hundreds of ppm.
  • Animal and Plant Analysis: The technique allows for the study of elemental distribution in plant tissues (e.g., Ca ions in sunflower stems) and animal tissues (e.g., Mg/Ca ratio in coral skeletons), providing insights into growth habits and environmental impacts. Femtosecond lasers have enabled sub-100 nm crater resolutions in plant analysis.
  • Semiconductor Analysis: µLIBS is used for detecting elemental distributions on silicon wafers, with applications in analyzing carbon impurities and even latent fingerprints, achieving resolutions down to 30 µm and even sub-micron levels with advanced techniques.
  • Crater Size Achievements: The paper highlights significant progress in reducing crater size, with research demonstrating resolutions down to less than 1 micron, and even as low as 100 nm in some cases, particularly with femtosecond lasers.

Limitations and Future Work

The authors acknowledge several limitations and suggest future research directions:

  • Quantitative Analysis Accuracy: Improving the accuracy of quantitative analysis at the microscopic spatial scale is a key challenge. Surface roughness, flatness, and matrix effects significantly influence plasma formation and signal intensity, requiring further theoretical and practical investigation.
  • Detection Limits: The detection limits for µLIBS are generally one to two orders of magnitude higher than conventional LIBS due to the small amount of ablated material and weak plasma signals. Further reduction of detection limits is needed for trace element analysis.
  • Non-Planar Surface Analysis: Developing robust methods for analyzing non-planar structural parts (e.g., metal structures, bones, ceramics) is crucial. While autofocusing can help with straight bevels, scanning analysis for complex geometries requires further research to maintain signal consistency.
  • Standardization: The lack of standardized sample preparation and analysis protocols hinders the repeatability of signals in practical applications, necessitating the development of standardized procedures.
  • Commercialization: Despite its potential, the high cost of equipment, stringent requirements for sample surface flatness, and issues with spectral signal reproducibility have limited the commercialization of µLIBS for some applications, with many reported uses remaining in experimental research.

Summary updated

BibTeX
@inproceedings{sun2018progress,
  author = {Lanxiang Sun and Wei Wang and Xue-yong Tian and Peng Zhang and Lifeng Qi and Liming Zheng},
  title = {{Progress in Research and Application of Micro-Laser-Induced Breakdown Spectroscopy}},
  booktitle = {Chinese},
  year = {2018},
  doi = {10.1016/s1872-2040(18)61114-4},
}
Figure