Profiling structured beams using injected aerosols

N. Duane Loh, D. Starodub, Lukas Lomb, Christina Y. Hampton, Andrew V. Martin, Raymond G. Sierra, Anton Barty, Andrew Aquila, Joachim Schulz, Jan Steinbrener, Robert L. Shoeman, Stephan Kassemeyer, Christoph Bostedt, John D. Bozek, Sascha W. Epp, Benjamin Erk, Robert Hartmann, Daniel Rolles, Artem Rudenko, Benedikt Rudek, L. Foucar, Nils Kimmel, G. Weidenspointner, Günther Hauser, P. Holl, Emanuele Pedersoli, Mengning Liang, Mark S. Hunter, Lars Gumprecht, N. Coppola, C. Wunderer, H. Graafsma, Filipe R. N. C. Maia, Tomas Ekeberg, Max F. Hantke, Holger Fleckenstein, H. Hirsemann, Karol Nass, Thomas A. White, Herbert J. Tobias, George R. Farquar, W. Henry Benner, Stefan P. Hau‐Riege, Christian Reich, Andreas Hartmann, H. Soltau, Stefano Marchesini, S. Bajt, Miriam Barthelmeß, Lothar Strueder, J. Ullrich, P. H. Bucksbaum, Keith O. Hodgson, Matthias Frank, Ilme Schlichting, Henry N. Chapman, Michael J. BoganProceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE 2012 · DOI

TL;DR

This paper introduces a novel method for precisely measuring the profile of intense X-ray Free-Electron Laser (FEL) beams by analyzing the diffraction patterns of injected latex spheres. This technique overcomes limitations of previous methods, offering a more accurate way to understand and optimize these powerful light sources for scientific experiments.

What Problem Does This Paper Address?

Understanding the exact shape and intensity distribution (the "profile") of X-ray FEL beams is critical for many experiments. These beams are incredibly intense, allowing scientists to image tiny structures or probe matter at unprecedented detail. However, this intensity also poses a challenge: it can damage diagnostic equipment or substrates used for measurement. Previous methods, like "ablative imprints" (measuring damage on a material), can be indirect and don't always reflect the true beam profile. Other methods, like Shack-Hartmann sensors, can be damaged by the intense X-rays. The authors aim to fill this gap by providing a non-destructive, in-situ method to accurately characterize these high-intensity FEL beams.

Methods

The core of the new method involves injecting tiny, well-characterized polystyrene spheres (latex beads) into the path of the X-ray FEL beam. When an X-ray pulse hits a sphere, it diffracts the light, creating a unique pattern on a detector. The key insight is that the translation (shift) of this diffraction pattern reveals the local "tilt" or shape of the X-ray beam's wavefront at the point where the sphere was hit. Similarly, the brightness of the diffraction pattern indicates the local intensity of the X-ray beam.

By using a spray of many spheres, randomly injected into the beam's focus, the researchers can sample the beam's profile at numerous points. They developed algorithms to:

  1. Center the diffraction patterns: Accurately identify the center of each sphere's diffraction pattern to ensure precise measurements.
  2. Fit sphere radii and incident intensities: Use a scalar diffraction model to determine the size of each sphere and the intensity of the X-ray pulse that hit it.
  3. Combine data: Average the information from many sphere-pulse interactions to reconstruct the overall beam profile, including its non-Gaussian characteristics and wavefront shape.

This approach is analogous to a Hartmann sensor but uses disposable spheres instead of fixed lenses, mitigating the damage issue.

Datasets

The experiment was conducted at the Linac Coherent Light Source (LCLS) at SLAC National Accelerator Laboratory. The "dataset" consists of diffraction patterns from 625 individual polystyrene spheres that were illuminated by FEL pulses. These patterns were collected using a pnCCD X-ray detector. The researchers also used data from a differential mobility analyzer (DMA) to calibrate the size of the polystyrene spheres.

Key Insights and Ideas

  • Spheres as disposable lenses: The ingenious use of randomly injected, sub-micron latex spheres acts as a distributed, disposable array of lenses, allowing for in-situ probing of the intense FEL beam without damaging the diagnostic itself.
  • Diffraction pattern translation reveals wavefront shape: The shift in the diffraction pattern directly correlates with the local phase tilt (wavefront curvature) of the X-ray beam, providing information about its optical quality.
  • Diffraction pattern brightness reveals intensity: The intensity of the diffraction pattern is proportional to the local X-ray fluence, allowing for mapping of the beam's power distribution.
  • Non-Gaussian beam profiles are common: The results suggest that FEL beams, even after focusing, can deviate significantly from a simple Gaussian profile, which is crucial for accurate experimental interpretation.
  • Potential for active feedback: This technique could enable real-time feedback to adjust upstream optics, optimizing the beam for experiments.

Key Results

The researchers successfully demonstrated the technique by analyzing diffraction patterns from 625 single polystyrene spheres. They were able to:

  • Determine the average radius of the polystyrene spheres to be 69.6 ± 3.3 nm, which was well-calibrated against DMA measurements.
  • Map the local incident photon fluence and angular deviation (related to wavefront shape) across the FEL beam's interaction region.
  • Show that the FEL beam's intensity distribution and wavefront shape differed from a simple spherical Gaussian beam, particularly in the transverse plane.
  • The technique was robust enough to handle the intense FEL pulses, with no detectable damage to the latex spheres at low resolution.

Limitations and Future Work

The authors acknowledge several limitations:

  • Unmeasured sphere positions: The exact position of each sphere within the interaction region was not known, limiting the ability to reconstruct the full 2D spatial profile of the wavefront directly. This is a key difference from a traditional Hartmann sensor.
  • Averaging over focus depth: The measurements are averaged over the finite depth of the FEL pulse's focus and the spray of spheres, meaning they represent an average profile rather than a snapshot of a single pulse's exact focus.
  • Pulse-to-pulse variation: It's unclear if the observed beam profile is consistent from pulse to pulse or if it fluctuates significantly, which could impact fixed-target experiments.

Future work should focus on addressing these limitations. This includes developing methods to better constrain the sphere's position and exploring ways to capture more detailed information about individual pulses. Further experiments are also needed to compare this method with unsaturated scintillation measurements for a more direct validation.

Summary updated

Abstract

Profiling structured beams produced by X-ray free-electron lasers (FELs) is crucial to both maximizing signal intensity for weakly scattering targets and interpreting their scattering patterns. Earlier ablative imprint studies describe how to infer the X-ray beam profile from the damage that an attenuated beam inflicts on a substrate. However, the beams in-situ profile is not directly accessible with imprint studies because the damage profile could be different from the actual beam profile. On the other hand, although a Shack-Hartmann sensor is capable of in-situ profiling, its lenses may be quickly damaged at the intense focus of hard X-ray FEL beams. We describe a new approach that probes the in-situ morphology of the intense FEL focus. By studying the translations in diffraction patterns from an ensemble of randomly injected sub-micron latex spheres, we were able to determine the non-Gaussian nature of the intense FEL beam at the Linac Coherent Light Source (SLAC National Laboratory) near the FEL focus. We discuss an experimental application of such a beam-profiling technique, and the limitations we need to overcome before it can be widely applied.
BibTeX
@inproceedings{loh2012profiling,
  author = {N. Duane Loh and D. Starodub and Lukas Lomb and Christina Y. Hampton and Andrew V. Martin and Raymond G. Sierra and Anton Barty and Andrew Aquila and Joachim Schulz and Jan Steinbrener and Robert L. Shoeman and Stephan Kassemeyer and Christoph Bostedt and John D. Bozek and Sascha W. Epp and Benjamin Erk and Robert Hartmann and Daniel Rolles and Artem Rudenko and Benedikt Rudek and L. Foucar and Nils Kimmel and G. Weidenspointner and Günther Hauser and P. Holl and Emanuele Pedersoli and Mengning Liang and Mark S. Hunter and Lars Gumprecht and N. Coppola and C. Wunderer and H. Graafsma and Filipe R. N. C. Maia and Tomas Ekeberg and Max F. Hantke and Holger Fleckenstein and H. Hirsemann and Karol Nass and Thomas A. White and Herbert J. Tobias and George R. Farquar and W. Henry Benner and Stefan P. Hau‐Riege and Christian Reich and Andreas Hartmann and H. Soltau and Stefano Marchesini and S. Bajt and Miriam Barthelmeß and Lothar Strueder and J. Ullrich and P. H. Bucksbaum and Keith O. Hodgson and Matthias Frank and Ilme Schlichting and Henry N. Chapman and Michael J. Bogan},
  title = {{Profiling structured beams using injected aerosols}},
  booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
  year = {2012},
  doi = {10.1117/12.930075},
}

Loading related content...

Figure