TL;DR
This paper introduces a novel productivity model for multi-fractured horizontal wells (MFHWs) in shale oil reservoirs. It uniquely accounts for complex, tree-shaped fracture networks, the two-phase behavior of oil and gas, and the crucial desorption effect, offering a more realistic prediction of well performance. The model's validation against field data and numerical simulations demonstrates its practical applicability and highlights the significant impact of phase behavior and desorption on shale oil production.
What Problem Does This Paper Address?
Developing shale oil reservoirs presents a significant challenge due to their extremely low porosity and permeability. To overcome this, multi-fractured horizontal wells (MFHWs) are employed, but their productivity is complicated by several factors. Firstly, the hydraulic fractures created are not simple planes but form intricate, tree-like networks. Secondly, the fluids within these reservoirs are not single-phase; they exist as a mixture of oil and gas, and their behavior changes dramatically with pressure (phase behavior). Finally, a substantial amount of hydrocarbons in shale reservoirs is stored via adsorption onto the rock matrix, and this adsorbed fluid can be released (desorption) as reservoir pressure drops. Existing productivity models often fail to integrate all these complexities, leading to inaccurate production forecasts. This paper aims to bridge this gap by developing a comprehensive model that considers these interconnected phenomena.
Methods
The authors developed a novel productivity model by integrating several advanced techniques:
- Fractal Theory: To characterize the complex, branching nature of hydraulic fractures, a tree-shaped fracture network model was established based on fractal theory. This allows for a more realistic representation of the fracture geometry compared to simpler models.
- Conformal Transformation: To handle the complex geometry of the fractured reservoir and the flow from the matrix into these intricate fractures, a conformal transformation technique was employed. This method simplifies the seepage region into a more manageable form for mathematical analysis.
- Pressure Superposition Principle: This principle was used to account for the cumulative effect of multiple fractures in a horizontal well, allowing for the summation of individual fracture contributions to determine the overall well productivity.
- Two-Phase Flow Equations: Darcy's law was adapted to describe the flow of both oil and gas phases simultaneously within the reservoir and fractures, considering their respective relative permeabilities and viscosities.
- Desorption Model: The Langmuir isotherm theory and Fick's law were used to model the desorption of shale gas, while a specific model was used for shale oil desorption, incorporating factors like organic carbon content.
- Pseudo-Pressure Function: To handle the non-linear flow behavior of two-phase systems, a pseudo-pressure function was utilized, which integrates fluid properties and relative permeabilities.
- Matrix Equation Solution: The final system of equations was solved using matrix algebra to determine the production rate of each fracture and, consequently, the total well productivity.
Datasets
- Field Data: The model was validated using field data from two shale oil wells: PA-1 and YY-1, located in China.
- Numerical Simulation: A numerical model of a MFHW was established using CMG (Computer Modelling Group) software to further validate the proposed model's predictions.
- PVT Data: Pressure-Volume-Temperature (PVT) data from the PA-1 well was used to fit the Peng-Robinson (PR) state equation, enabling accurate determination of fluid properties under various pressures.
Key Insights and Ideas
- Interconnectedness of Factors: The study powerfully demonstrates that shale oil reservoir productivity is not governed by a single factor but by a complex interplay of fracture geometry, fluid phase behavior, and desorption. Ignoring any of these can lead to significant prediction errors.
- Desorption as a Major Enhancer: Fluid desorption, particularly from shale oil, can dramatically increase well productivity. This highlights the importance of understanding and modeling this phenomenon for optimizing recovery.
- Phase Behavior as a Limiter: Conversely, the transition from single-phase oil to two-phase oil-gas flow as pressure drops significantly reduces well productivity due to increased flow resistance. This underscores the need for accurate phase behavior modeling.
- Fracture Network Complexity Matters: The tree-shaped fractal model provides a more realistic representation of hydraulic fractures, and its parameters (length ratio, width ratio, branch angle) have a substantial impact on productivity, offering insights for fracture design.
Key Results
- The proposed model accurately predicts well productivity, showing strong agreement with field data from the PA-1 and YY-1 wells.
- Phase behavior was found to reduce well productivity by a significant 33%.
- Fluid desorption was shown to increase well productivity by a substantial 75%.
- The study quantified the impact of various fracture parameters:
- Increasing length ratio ($a$) and branch level ($n$) generally increases productivity.
- Decreasing branch angle ($\theta$) increases productivity.
- Increasing width ratio ($b$) initially increases productivity, then plateaus.
- Decreasing fracture spacing increases interference between fractures, reducing productivity.
Limitations and Future Work
- Model Assumptions: The model assumes a finite, vertically sealed formation with homogeneity and isotropy, which may not hold true for all shale reservoirs. The fluid flow is assumed to be isothermal and governed by Darcy's law, neglecting gravity effects.
- Data Availability: The authors note that they only had access to field data from two wells and were unable to obtain additional data due to confidentiality concerns.
- Future Work: While not explicitly detailed, the authors' comprehensive approach suggests potential for extending this model to incorporate other complex reservoir phenomena like stress sensitivity, non-Darcy flow, and geomechanical effects, further enhancing its predictive capabilities for diverse shale oil reservoir conditions. The detailed analysis of fracture parameters also opens avenues for optimizing hydraulic fracturing designs.
Summary updated