Processing and properties of B 4 C ceramics reinforced with TiB 2 ‒CrB 2 solid solution

Yuxiao Li, Qingqing Yang, Ji Zou, Shuaihang Qiu, Huayue Liang, Jingjing Liu, Haibin Ma, Wei Ji, Weimin Wang, Zhengyi FuJournal of the American Ceramic Society 2025 · DOI

Abstract

Abstract Lightweight boron carbide (B 4 C)‐based composites with optimized mechanical properties were consolidated at 1850°C‒1900°C through a combination of carbide boronizing and spark plasma sintering, with (Ti 0.9 Cr 0.1 )B 2 reinforcement contents systematically varied from 0 to 30 vol.%. Densification behavior analysis revealed that with increasing carbide contents in the reactants, the exothermic reactivity and volumetric shrinkage became more pronounced, facilitating enhanced densification at lower temperatures. Additions of (Ti 0.9 Cr 0.1 )B 2 ‐induced significant grain refinement of B 4 C, the averaged grain size of B 4 C in B 4 C‒20 vol.% (Ti 0.9 Cr 0.1 )B 2 composites (0.71 ± 0.27 µm) is even smaller than those from the raw powders (∼1 µm). B 4 C with 20 vol.% (Ti 0.9 Cr 0.1 )B 2 showed balanced mechanical properties including flexural strength of 620.23 ± 20.01 MPa, fracture toughness of 5.50 ± 0.04 MPa m 1/2 , Vickers hardness ( H v ) of 37.72 ± 1.79 GPa, and a specific hardness of 13.01 GPa cm 3 g −1 . Above enhancement mechanisms were systematically correlated with microstructural characteristics through applications of Griffith's fracture theory.
BibTeX
@article{li2025processing,
  author = {Yuxiao Li and Qingqing Yang and Ji Zou and Shuaihang Qiu and Huayue Liang and Jingjing Liu and Haibin Ma and Wei Ji and Weimin Wang and Zhengyi Fu},
  title = {{Processing and properties of B <sub>4</sub> C ceramics reinforced with TiB <sub>2</sub> ‒CrB <sub>2</sub> solid solution}},
  journal = {Journal of the American Ceramic Society},
  year = {2025},
  doi = {10.1111/jace.20658},
}

Loading related content...

Figure