Process optimization for mass production of 2,3-butanediol by Bacillus subtilis CS13

Dexin Wang, Baek-Rock Oh, Sungbeom Lee, Dae‐Hyuk Kim, Min-Ho JoeBiotechnology for Biofuels 2021 · DOI

TL;DR

This study optimizes the production of 2,3-butanediol (2,3-BD), a valuable chemical and fuel precursor, using the GRAS (Generally Recognized As Safe) bacterium Bacillus subtilis CS13. By employing response surface methodology and fed-batch fermentation, they achieved a record-breaking titer of 132.4 g/L of 2,3-BD, demonstrating the strain's potential for industrial-scale, cost-effective production, even using molasses as a feedstock.

What Problem Does This Paper Address?

2,3-butanediol (2,3-BD) is a versatile chemical with applications ranging from food and pharmaceuticals to polymers and fuels. Traditionally, bulk chemicals are produced via petroleum refining, but there's a growing interest in sustainable, bio-based production routes. Microbial fermentation offers an environmentally friendly alternative, utilizing renewable resources. While several bacterial species can produce 2,3-BD, Bacillus subtilis strains are particularly attractive due to their GRAS status, reducing regulatory hurdles for industrial applications. However, previous studies on B. subtilis for 2,3-BD production have shown lower yields and productivities compared to other, sometimes pathogenic, microorganisms like Klebsiella species. Therefore, the challenge is to significantly improve the efficiency of 2,3-BD production by B. subtilis to make it competitive for industrial-scale manufacturing.

Methods

The researchers employed a multi-pronged approach to optimize 2,3-BD production:

  • Medium Optimization using Response Surface Methodology (RSM): They used a Face-Centered Central Composite Design (FCCD) to systematically investigate the impact of three key medium components – sucrose (carbon source), ammonium citrate (nitrogen source), and magnesium sulfate heptahydrate (MgSO₄·7H₂O) – on 2,3-BD production. RSM is a statistical technique used to model and optimize processes with multiple variables.
  • Batch Fermentation: After optimizing the medium, they conducted batch fermentations to fine-tune process parameters like agitation speed and aeration rate. This helps understand how physical conditions influence growth and product formation.
  • Fed-Batch Fermentation: To overcome potential substrate inhibition and achieve higher product concentrations, they implemented fed-batch strategies. This involves adding nutrients (sucrose or molasses) incrementally during the fermentation to maintain optimal conditions.
  • Molasses as a Carbon Source: To assess cost-effectiveness, they also tested the strain's ability to produce 2,3-BD using untreated molasses, a readily available industrial byproduct.
  • Analytical Techniques: High-performance liquid chromatography (HPLC) was used to quantify 2,3-BD, acetoin, and sugars. Biomass was measured using optical density and a calibration curve for dry cell weight.

Datasets

Not discussed in the paper. The study focuses on experimental optimization and characterization of Bacillus subtilis CS13, rather than training on pre-existing datasets.

Key Insights and Ideas

  • The Power of Optimization: The study highlights how systematic optimization of both the fermentation medium and process parameters (agitation, aeration) can dramatically boost the production of valuable biochemicals.
  • GRAS Strain Potential: Bacillus subtilis CS13, a GRAS strain, proves to be a highly capable producer of 2,3-BD, surpassing many previously reported strains, including some pathogenic ones. This is crucial for industrial adoption due to safety and regulatory advantages.
  • Meso-2,3-BD Dominance: The strain predominantly produces meso-2,3-BD (92.1%), a valuable isomer with specific applications, simplifying downstream purification.
  • Molasses as a Viable Feedstock: The successful production of 2,3-BD using untreated molasses demonstrates the economic feasibility of this process, as molasses is a low-cost industrial byproduct.
  • Oxygen's Dual Role: Agitation and aeration rates significantly impact not only the overall 2,3-BD yield but also the stereoisomer ratio, suggesting a complex interplay with dissolved oxygen levels.

Key Results

  • Optimized Medium: The best medium composition for 2,3-BD production was found to be 281.1 g/L sucrose, 21.9 g/L ammonium citrate, and 3.6 g/L MgSO₄·7H₂O.
  • Batch Fermentation: Optimal conditions for batch fermentation were identified as 500 rpm agitation speed and 2 L/min aeration rate, yielding 49.8 g/L of 2,3-BD.
  • Fed-Batch Fermentation (Sucrose): A maximum 2,3-BD titer of 132.4 ± 4.4 g/L was achieved with a productivity of 2.45 ± 0.08 g/L/h and a yield of 0.45 g 2,3-BD /g sucrose. The meso-2,3-BD/D-2,3-BD ratio was 92.1%.
  • Fed-Batch Fermentation (Molasses): Using untreated molasses, a titer of 89.6 ± 2.8 g/L was obtained with a productivity of 2.13 ± 0.07 g/L/h and a yield of 0.42 g 2,3-BD /g sugar.
  • Comparison: The achieved results for B. subtilis CS13 show higher concentration, productivity, and yield compared to many previously reported GRAS 2,3-BD producers.

Limitations and Future Work

  • Substrate Inhibition: While fed-batch fermentation mitigated sucrose inhibition, high concentrations of molasses components (metal ions, ash) eventually led to a decrease in productivity.
  • Acetoin Formation: In the later stages of fed-batch fermentation, 2,3-BD was converted back to acetoin, indicating a shift in metabolic pathways.
  • Future Work: The authors suggest further investigation into the gene and metabolic regulation governing these processes. Exploring strategies to further enhance molasses utilization and minimize byproduct formation would be valuable for industrial scale-up. Understanding the precise mechanisms behind the observed stereoisomer ratios and the conversion of 2,3-BD to acetoin could lead to even more refined production processes.

Summary updated

Abstract

Abstract Background Bacillus subtilis CS13 was previously isolated for 2,3-butanediol (2,3-BD) and poly-γ-glutamic acid (γ-PGA) co-production. When culturing this strain without L-glutamic acid in the medium, 2,3-BD is the main metabolic product. 2,3-BD is an important substance and fuel with applications in the chemical, food, and pharmaceutical industries. However, the yield and productivity for the B. subtilis strain should be improved for more efficient production of 2,3-BD. Results The medium composition, which contained 281.1 g/L sucrose, 21.9 g/L ammonium citrate, and 3.6 g/L MgSO 4 ·7H 2 O, was optimized by response surface methodology for 2,3-BD production using B. subtilis CS13. The maximum amount of 2,3-BD (125.5 ± 3.1 g/L) was obtained from the optimized medium after 96 h. The highest concentration and productivity of 2,3-BD were achieved simultaneously at an agitation speed of 500 rpm and aeration rate of 2 L/min in the batch cultures. A total of 132.4 ± 4.4 g/L 2,3-BD was obtained with a productivity of 2.45 ± 0.08 g/L/h and yield of 0.45 g 2,3-BD /g sucrose by fed-batch fermentation. The meso-2,3-BD/2,3-BD ratio of the 2,3-BD produced by B. subtilis CS13 was 92.1%. Furthermore, 89.6 ± 2.8 g/L 2,3-BD with a productivity of 2.13 ± 0.07 g/L/h and yield of 0.42 g 2,3-BD /g sugar was achieved using molasses as a carbon source. Conclusions The production of 2,3-BD by B. subtilis CS13 showed a higher concentration, productivity, and yield compared to the reported generally recognized as safe 2,3-BD producers. These results suggest that B. subtilis CS13 is a promising strain for industrial-scale production of 2,3-BD.
BibTeX
@inproceedings{wang2021process,
  author = {Dexin Wang and Baek-Rock Oh and Sungbeom Lee and Dae‐Hyuk Kim and Min-Ho Joe},
  title = {{Process optimization for mass production of 2,3-butanediol by Bacillus subtilis CS13}},
  booktitle = {Biotechnology for Biofuels},
  year = {2021},
  doi = {10.1186/s13068-020-01859-w},
}
Figure