TL;DR
This paper introduces a novel "Prior-Guided Residual Reinforcement Learning" (RRL) framework for active vehicle suspension control. By combining a stable Linear Quadratic Regulator (LQR) with an enhanced Twin Delayed Deep Deterministic Policy Gradient (TD3) algorithm that incorporates residual connections and LSTM layers, the RRL approach achieves superior ride comfort and handling stability across diverse road conditions compared to traditional methods.
What Problem Does This Paper Address?
Active suspension systems hold immense potential for improving vehicle dynamics, ride comfort, and safety by actively counteracting road disturbances. However, achieving consistent and robust control performance across a wide range of road conditions, especially those that are unpredictable or uncertain, remains a significant challenge. Traditional model-based controllers like LQR offer stability and interpretability but struggle with adaptability to dynamic changes. Pure reinforcement learning (RL) methods, while flexible, often suffer from low sample efficiency, slow convergence, and lack of guaranteed stability in safety-critical applications. This paper aims to bridge this gap by developing a hybrid control strategy that leverages the strengths of both model-based and data-driven approaches.
Methods
The core of this paper is the proposed Prior-Guided Residual Reinforcement Learning (RRL) framework. This approach combines two key components:
- Linear Quadratic Regulator (LQR) as a Prior Controller: An LQR controller is first implemented to provide a baseline control force. This ensures fundamental stability and a degree of performance, especially under known or predictable conditions. The LQR's optimal feedback gain is derived using a standard state-space model of the vehicle suspension.
- Enhanced Twin Delayed Deep Deterministic Policy Gradient (TD3) for Residual Control: A modified TD3 algorithm is employed to learn a residual control policy. This means the TD3 learns to generate a corrective force that is added to the LQR's output. This residual control is crucial for adapting to unmodeled dynamics, disturbances, and varying road conditions where the LQR alone might falter.
The TD3 algorithm itself is enhanced with two key architectural modifications:
- Residual Connections: These are incorporated into the Actor network to help mitigate the vanishing gradient problem, improving training stability and the network's ability to capture both shallow and deep features.
- Long Short-Term Memory (LSTM) Layers: LSTM layers are integrated into both the Actor and Critic networks. This allows the networks to better model temporal dependencies, system inertia, and environmental nonlinearities, which are critical for accurately predicting and responding to dynamic suspension behavior.
The overall control force is the sum of the LQR output and the residual force generated by the improved TD3.
Datasets
Not discussed in the paper. The evaluation relies on simulations using a quarter-car model and simulated road excitations based on ISO standards.
Key Insights and Ideas
- Hybrid Control is Key: The paper strongly suggests that a hybrid approach, combining the stability of model-based control (LQR) with the adaptability of deep reinforcement learning (TD3), is more effective for active suspension control than either method alone.
- Residual Learning for Robustness: Learning a residual control signal, rather than the entire control action, allows the RL agent to focus on correcting the limitations of the prior controller, leading to improved robustness and adaptability.
- LSTM for Temporal Dynamics: The inclusion of LSTM layers is crucial for capturing the inherent time-varying nature and inertial characteristics of suspension systems, leading to more accurate modeling and better control performance.
- Architectural Enhancements Matter: The specific modifications to the TD3 architecture (residual connections and LSTMs) are shown to significantly improve training stability and the overall effectiveness of the RL agent.
Key Results
The proposed RRL method consistently outperformed passive suspension, standalone LQR, and a conventional TD3 algorithm across two different road excitation conditions (ISO Class B and Class E).
- Body Acceleration: The RRL method achieved the lowest body acceleration amplitude. For Class B roads, it reduced the RMS of body acceleration by 28.3286% compared to passive suspension. For Class E roads, this reduction was 31.5988%.
- Body Displacement: RRL also demonstrated superior performance in minimizing body displacement, with RMS reductions of 13.1371% (Class B) and 43.2449% (Class E) compared to passive suspension.
- Body Velocity: The RRL approach led to the smallest body velocity fluctuations and amplitudes, showing RMS reductions of 60.4671% (Class B) and 68.1833% (Class E) compared to passive suspension.
- Adaptability: The improved TD3 model's output varied in real-time according to road excitation, demonstrating its dynamic adaptation capabilities, especially under more severe Class E road conditions.
Limitations and Future Work
- Simulation-Based: The study is based on simulations using a quarter-car model. Real-world validation is needed to confirm these findings.
- Future Work: The authors plan to extend the approach to full-vehicle dynamic models. They also aim to conduct hardware-in-the-loop simulations to evaluate real-time performance and implementation feasibility. Furthermore, they propose incorporating road preview information and multi-sensor data fusion to enhance anticipatory capabilities and adaptability in more complex and uncertain driving environments.
Summary updated