Preparation and properties of highly c-axis-oriented Sr 0.6 Ba 0.4 Nb 2 O 6 thin films by the sol-gel process
Lists
Only you see this
Abstract
Highly oriented ferroelectric strontium barium niobate (Sr<sub>0.6</sub>Ba<sub>0.4</sub>Nb<sub>2</sub>O<sub>6</sub>) thin films were prepared on P-type Si(100) substrate by the Sol-Gel process. The XRD patterns of the SBN films show that SBN film prepared by using NbCl5, KOH as raw materials performed a highly c-axis preferred orientation perpendicular to the Si substrate, better than films that was prepared using Nb(OC<sub>2</sub>H<sub>5</sub>)<sub>5</sub> as starting agents. It may be duo to the existence of the potassium ion that not be filtered out completely during the preparation of the niobium alkoxide. The characteristics of D-F and C-V curves were obtained for SBN/Si film. The film exhibits high dielectric constant. In order to investigate ferroelectric characteristics further, the P-E loops of the SBN/Pt/Si were also measured. The films show better optical properties, transmittance of Sr<sub>0.6</sub>Ba<sub>0.4</sub>Nb<sub>2</sub>O<sub>6</sub> films on MgO(001) and SiO<sub>2</sub> substrates was more than 60% at the range from 450 to 850nm, refractive index was measured to be 2.14 and 2.12 on the MgO and SiO<sub>2</sub> substrate at 633nm respectively.
BibTeX
@inproceedings{shen2005preparation,
author = {Zhiru Shen and Hui Ye and Tong Zou and Bing Guo},
title = {{Preparation and properties of highly c-axis-oriented Sr 0.6 Ba 0.4 Nb 2 O 6 thin films by the sol-gel process}},
booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
year = {2005},
doi = {10.1117/12.574733},
}Loading related content...