Preparation and Characterizaton of SiO2 Composite Membranes for Purification of Hydrogen for PEMFC

Dong-Wook Lee, Bongkuk Sea, Kwan-Young Lee, Kew-Ho LeeIndustrial 2002 · DOI

Abstract

Silica composite membranes were prepared for CO removal from products of methanol steam reforming. A porous stainless steel (SUS) support was used to improve the mechanical strength of the membrane. Supports were prepared by coating Ni-powder SiO2 sols with a particle size of 500 and 150 nm in turns on SUS. Silica top layer was coated on the modified support using a colloidal sol with nanoparticles or a polymeric sol. Density of the membrane surface was controlled by repeating dipping−drying or the whole process of dipping−drying−calcination, and the nanostructure of the top layer was controlled by changing the top layer material. As a result of a mixture gas permeation test of the silica composite membrane using H2(99%)/CO(1%), the CO concentration of 10 000 ppm was reduced to under 81 ppm. The permeation mechanism through the membrane was mainly molecular sieving.
BibTeX
@inproceedings{lee2002preparation,
  author = {Dong-Wook Lee and Bongkuk Sea and Kwan-Young Lee and Kew-Ho Lee},
  title = {{Preparation and Characterizaton of SiO<sub>2</sub> Composite Membranes for Purification of Hydrogen for PEMFC}},
  booktitle = {Industrial},
  year = {2002},
  doi = {10.1021/ie010853f},
}

Loading related content...

Figure