Abstract
This research focuses on the preparation of cellulose nanocrystals (CNCs) from Pennisetum hydridum fertilized by municipal sewage sludge (MSS) through sulfuric acid hydrolysis. By varying acid concentrations (40–65%), temperature (room temperature to 55°C), and reaction time (50–120 min), the study identified optimal conditions for producing stable CNC dispersions. The resulting CNCs exhibited a length of 272.5 nm and a diameter under 10 nm at room temperature with 65% acid concentration. Characterization via FTIR, XRD, and TGA confirmed the retention of the cellulose type I structure, an 18.34% increase in crystallinity, and a decrease in thermal stability due to sulfate group introduction. This work highlights a viable resource utilization pathway for both MSS and Pennisetum hydridum.
Introduction
The growing demand for sustainable, bio-based nanomaterials has prompted researchers to explore alternative cellulose sources beyond traditional wood and cotton. Pennisetum hydridum, a high-biomass energy crop, is particularly attractive due to its rapid growth and phytoremediation capabilities in contaminated soils. While commonly used for animal feed or paper pulp, its potential for high-value nanocellulose production—especially when cultivated using municipal sewage sludge (MSS) as fertilizer—remains largely untapped.
The primary challenge in extracting CNCs is the efficient "top-down" deconstruction of plant fibers. This requires stripping away lignin and hemicellulose and precisely hydrolyzing the amorphous regions of the cellulose chain while preserving the crystalline core. This study aims to optimize the acid concentration, temperature, and reaction time to produce high-quality CNCs from this specific biomass.
Methodology
The extraction process followed a multi-stage chemical approach:
- Pretreatment: Stalks of P. hydridum were ground and subjected to delignification using sodium chlorite and glacial acetic acid to isolate pure cellulose fibers.
- Sulfuric Acid Hydrolysis: The isolated fibers underwent hydrolysis under varying conditions: acid concentrations of 40%, 55%, and 65% (wt); temperatures ranging from room temperature (RT) to 70°C; and reaction times of 50 and 120 minutes.
- Characterization: The morphology, crystallinity, chemical structure, and thermal stability of the resulting CNCs were analyzed using Transmission Electron Microscopy (TEM), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and Thermogravimetric Analysis (TGA).
Results and Discussion
Optimization of Hydrolysis Conditions
A key finding was the "Room Temperature Advantage." Contrary to expectations, the most uniform and smallest CNCs (length of 272.5 nm) were produced at room temperature with a 65% acid concentration over 120 minutes. This indicates that for P. hydridum, high heat is not necessary for effective hydrolysis and can even be detrimental.
The Carbonization Limit
The study identified a critical processing threshold. At temperatures of 70°C and acid concentrations ≥ 55%, the cellulose underwent carbonization rather than controlled hydrolysis. This resulted in a black suspension, rendering the CNCs unusable for standard applications.
Physical and Chemical Properties
- Crystallinity: The removal of disordered amorphous regions led to a significant boost in crystallinity, reaching a maximum of 62.59%—an 18.34% increase over delignified fibers.
- Dispersion Stability: The use of sulfuric acid introduced sulfate groups onto the cellulose surface. While these groups slightly reduced thermal stability (degradation peak at 291.1°C), they provided a strong negative surface charge (Zeta potential of -34.9 mV), ensuring excellent dispersion stability in water.
- Yield: The maximum yield of 43.6% was achieved at 40°C with 55% acid concentration over 120 minutes.
Conclusion
This research successfully demonstrates a "waste-to-wealth" pipeline by converting MSS-fertilized Pennisetum hydridum into high-quality CNCs. The optimized room-temperature process yields stable, highly crystalline nanofibers suitable for nanocomposites and biomedical applications. Future work should focus on the economic feasibility of acid recovery and specific application testing, such as using these CNCs as adsorbents for heavy metal removal in wastewater treatment.
Summary updated