Preparation and characterization of carbon-supported PtRuIr catalyst with excellent CO-tolerant performance for proton-exchange membrane fuel cells

Yajing Liang, Huidong Zhang, Haixia Zhong, Xiaobing Zhu, Zhijian Tian, Dongkuan Xu, B YiJournal of Catalysis 2006 · DOI

TL;DR

Researchers have developed a new platinum-ruthenium-iridium (PtRuIr) catalyst supported on carbon that significantly improves the CO tolerance of proton-exchange membrane (PEM) fuel cells. This novel catalyst exhibits superior CO electro-oxidation activity compared to existing PtRu catalysts, paving the way for more efficient and practical fuel cell applications.

What Problem Does This Paper Address?

Proton-exchange membrane (PEM) fuel cells are a promising clean energy technology, with hydrogen being an ideal fuel. However, a major hurdle is the presence of even small amounts of carbon monoxide (CO) in the hydrogen fuel stream. CO acts as a potent poison for platinum-based catalysts, which are essential for the hydrogen oxidation reaction (HOR) at the anode. This CO poisoning severely degrades fuel cell performance and efficiency, hindering widespread adoption. While binary PtRu catalysts have shown some improvement, the search for even more CO-tolerant and active catalysts continues to be a critical challenge.

Methods

The researchers employed a microwave-irradiated polyol plus annealing (MIPA) synthesis strategy to prepare their PtRuIr/C catalyst. This method utilizes ethylene glycol as both a reducing agent and solvent, with microwave irradiation providing rapid and homogeneous heating, leading to small and uniformly sized metal nanoparticles. The process involves mixing metal salts (platinum, ruthenium, and iridium precursors) with carbon support, followed by microwave treatment and then reductive annealing under a nitrogen/hydrogen atmosphere.

Characterization techniques included:

  • Transmission Electron Microscopy (TEM): To visualize particle morphology, size, and distribution.
  • Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES): To determine the bulk elemental composition of the catalysts.
  • Energy-Dispersive Spectroscopy (EDS): To assess the compositional homogeneity of individual particles.
  • X-ray Diffraction (XRD): To analyze the crystalline structure and phase composition of the catalysts.
  • X-ray Photoelectron Spectroscopy (XPS): To investigate the oxidation states of the metals on the catalyst surface.
  • CO Stripping Voltammetry: A key electrochemical technique to evaluate the catalyst's ability to oxidize adsorbed CO.
  • Single PEM Fuel Cell Tests: To assess the catalyst's performance in a realistic fuel cell environment under CO-containing fuel.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of a novel catalyst and its performance evaluation using electrochemical techniques and fuel cell testing.

Key Insights and Ideas

  • Iridium as a Game-Changer: The addition of iridium to the traditional PtRu catalyst significantly enhances CO tolerance and electro-oxidation activity.
  • Synergistic Interaction: The superior performance of PtRuIr/C is hypothesized to stem from a synergistic interaction between RuO2 and IrO2 species, facilitating the oxidation of adsorbed CO at lower potentials.
  • MIPA Synthesis Advantage: The microwave-assisted polyol method proves effective in producing small, well-dispersed PtRuIr nanoparticles, crucial for high catalytic activity.
  • CO Oxidation Mechanism: The study suggests that IrO2 plays a role in promoting the dissociation of water to form hydroxyl species, which then oxidize adsorbed CO.
  • Beyond Binary: While PtRu is a known CO-tolerant system, this work demonstrates the potential of ternary alloys like PtRuIr for further performance gains.

Key Results

  • Enhanced CO Oxidation: The PtRuIr/C catalyst showed a COads electro-oxidation peak potential of 0.25 V vs. SCE, significantly lower than PtRu/C (0.45 V vs. SCE) and commercial E-TEK PtRu/C (0.31 V vs. SCE).
  • Higher Active Surface Area (EAS): The PtRuIr/C catalyst exhibited a higher EAS for COads oxidation (64.3 m²/g metal) compared to PtRu/C (30.6 m²/g metal).
  • Superior Fuel Cell Performance: In single PEM fuel cell tests with 100 ppm CO in the fuel, the PtRuIr/C anode catalyst delivered higher cell voltages at a given current density compared to both PtRu/C and E-TEK PtRu/C. For instance, at 100 mA/cm², the voltage was 0.864 V for PtRuIr/C, which was 50 mV higher than PtRu/C.
  • Improved CO Conversion: Gas chromatography analysis showed that approximately 70% of CO was converted to CO2 on the PtRuIr/C catalyst at 100 mA/cm², indicating effective CO utilization.
  • Nanoparticle Size: The mean particle diameter for PtRuIr/C was 2.9 nm, with a size distribution of 1-5 nm, comparable to PtRu/C.

Limitations and Future Work

  • Alloy Formation Uncertainty: While XRD data suggests potential alloy formation, the authors acknowledge that definitively proving ternary alloy formation in such small nanoparticles is challenging and requires further investigation using techniques like XAS.
  • Mechanism Speculation: The proposed mechanism involving RuO2-IrO2 interaction and facilitated CO oxidation is speculative and warrants more in-depth study.
  • Stability: The long-term stability of the PtRuIr/C catalyst, particularly in acidic media, is critical for practical applications and requires further investigation, although the authors note that IrO2 is known to improve RuO2 stability.
  • Optimization: The authors suggest that further refinement of the preparative conditions could lead to even better catalyst performance.

Summary updated

BibTeX
@article{liang2006preparation,
  author = {Yajing Liang and Huidong Zhang and Haixia Zhong and Xiaobing Zhu and Zhijian Tian and Dongkuan Xu and B YI},
  title = {{Preparation and characterization of carbon-supported PtRuIr catalyst with excellent CO-tolerant performance for proton-exchange membrane fuel cells}},
  journal = {Journal of Catalysis},
  year = {2006},
  doi = {10.1016/j.jcat.2006.01.005},
}
Figure