Prediction of Helicopter Maneuver Loads Using BDF/Time Spectral Method on Unstructured Meshes

Zhi Yang, Dimitri J. Mavriplis, Jayanarayanan Sitaraman49th 2011 · DOI

TL;DR

This paper introduces a hybrid BDF/time-spectral method to efficiently simulate complex helicopter maneuvers, which involve both periodic rotor motion and slower vehicle transients. By combining the strengths of time-spectral methods for periodic flows and BDF methods for transients, they achieve accurate predictions of maneuver loads with reduced computational cost compared to traditional implicit time-stepping approaches.

What Problem Does This Paper Address?

Simulating the unsteady aerodynamic loads on helicopters during maneuvers is computationally expensive. Traditional implicit time-marching schemes require very small time steps to accurately capture the rapid, periodic motion of the rotor blades, leading to long simulation times, especially when combined with slower vehicle maneuvers. While time-spectral methods excel at simulating purely periodic flows efficiently, they are not directly applicable to quasi-periodic flows, which are common in real-world scenarios like helicopter flight. This paper addresses the challenge of efficiently and accurately simulating these quasi-periodic maneuvers by developing and applying a hybrid approach.

Methods

The core of the paper is the BDF/time-spectral method. This hybrid approach leverages the efficiency of time-spectral methods for the periodic components of the flow (rotor motion) and the robustness of Backward Differentiation Formulas (BDF) for the non-periodic, transient components (vehicle maneuver).

Here's a breakdown of the key methodological aspects:

  • Time-Spectral Method: This technique decomposes the flow variables into a Fourier series in time, allowing for the solution of multiple time instances simultaneously. This is particularly effective for periodic flows.
  • BDF Method: This is a standard implicit time-stepping scheme used for solving differential equations, known for its stability.
  • Hybrid BDF/Time-Spectral Approach: The authors propose a "polynomial subtraction" strategy. They split the solution into a slowly varying polynomial (transient) component and a purely periodic component. The periodic part is then handled by the time-spectral method, while the transient part is managed by BDF. This allows for larger time steps (on the order of the rotor period) compared to traditional BDF methods, significantly reducing computational cost.
  • Unstructured Meshes: The simulations are performed on unstructured meshes, which are flexible for complex geometries like helicopter rotors.
  • Geometric Conservation Law (GCL): A crucial aspect for unsteady simulations on moving and deforming meshes is ensuring discrete conservation. The paper formulates and verifies the GCL for their hybrid method, ensuring physical consistency.
  • Parallelism: The method is designed to exploit parallelism, with solutions for different time instances being solved concurrently.

Datasets

The paper uses data from the NASA-Army UH-60A Airloads Program. Specifically, they compare their simulation results against:

  • Experimental flight-test data: This data provides real-world measurements of rotor loads during various flight conditions, including a specific pull-up maneuver.
  • Previous CFD-CSD simulations: Results from prior coupled Computational Fluid Dynamics (CFD) and Computational Structural Dynamics (CSD) simulations are also used for comparison, particularly for prescribed aeroelastic deflections and hub motion.

The paper does not introduce a new benchmark dataset but rather uses existing experimental and simulation data to validate their novel computational approach.

Key Insights and Ideas

  • Bridging the Gap: The most significant insight is the successful development of a hybrid method that effectively combines the strengths of time-spectral and BDF methods to tackle quasi-periodic problems, which are prevalent in rotorcraft aerodynamics.
  • Computational Efficiency: The BDF/time-spectral approach offers a substantial reduction in computational cost for simulating helicopter maneuvers compared to traditional implicit time-stepping methods, without sacrificing temporal accuracy. This is achieved by allowing larger time steps.
  • Parallelism Potential: The method inherently lends itself to parallelization by solving multiple time instances concurrently, which is a key advantage for modern multi-core architectures.
  • GCL Compliance: Ensuring geometric conservation on deforming meshes is critical for accuracy. The paper demonstrates that their hybrid method adheres to the GCL, which is essential for reliable simulations.
  • Maneuver Complexity: The UH-60A pull-up maneuver serves as a challenging test case, pushing the limits of predictive capabilities due to its high load factors and transition from high-speed flight to a climb.

Key Results

  • Accurate Predictions: The BDF/time-spectral method, particularly with an increased number of time instances (N=11), shows good agreement with traditional BDF time-domain simulations and experimental flight-test data for both periodic high-speed forward flight and the transient pull-up maneuver.
  • Improved Efficiency: For the UH-60A maneuver, the BDFTS simulations were found to be roughly equivalent in total CPU time to a BDF2 simulation using N=11 time instances, but with the potential for significant speedup (up to 10x) by exploiting spatial parallelism more effectively.
  • Qualitative Agreement: The method captures the general trends in blade normal forces and pitching moments, as well as rotor thrust, during the maneuver.
  • Convergence Behavior: The agreement between BDFTS and BDF methods improves as the number of time instances (N) in the BDFTS approach is increased.

Limitations and Future Work

  • Spatial Resolution: The authors acknowledge that the relatively coarse mesh used in the simulations might contribute to discrepancies with experimental data, particularly in detailed aerodynamic loading and pitching moment predictions.
  • Mesh Convergence Study: A spatial mesh convergence study was not performed but is planned for future work to further improve accuracy.
  • Interaction Effects: The current model treats the aircraft as an isolated rotor. Future studies should include the effects of the aircraft fuselage, hub, engines, and tail rotor for a more complete simulation.
  • Further Investigation: The paper suggests examining the use of even more time instances in the time-spectral approach and developing faster implicit system convergence techniques. The long-term objective is to demonstrate the advantages of time-spectral approaches for a wider range of rotorcraft problems.

Summary updated

Abstract

For flows with strong periodic content, time-spectral methods can be used to obtain time-accurate solutions at substantially reduced cost compared to traditional time-implicit methods which operate directly in the time domain. The time-spectral approach requires the simultaneous coupled solution of multiple time instances, which can be performed effectively in parallel on modern multicore parallel computer architectures. Although timespectral methods are only applicable to purely periodic flows, in previous work we have demonstrated the ability of a hybrid BDF/time-spectral approach for simulating quasiperiodic flows with good overall efficiency. A quasi periodic flow is defined as one which involves a slow transient in addition to a higher frequency periodic component. In this paper, we apply the BDF/time-spectral approach to compute the important practical problem of time dependent helicopter maneuver loads, which combine the periodic rotor motion with a slower vehicle maneuvering transient. The simulation includes a rotating and deforming mesh with prescribed aeroelastic blade deflections. The formulated BDF/time-spectral approach is compliant with the geometric conservation law, and produces equivalent temporal accuracy using less computation effort compared to a traditional BDF time-implicit approach.
BibTeX
@inproceedings{yang2011prediction,
  author = {Zhi Yang and Dimitri J. Mavriplis and Jayanarayanan Sitaraman},
  title = {{Prediction of Helicopter Maneuver Loads Using BDF/Time Spectral Method on Unstructured Meshes}},
  booktitle = {49th},
  year = {2011},
  doi = {10.2514/6.2011-1122},
}
Figure