Precision enhanced alignment bonding technique with sacrificial strategy

Qian Li, Zi Ye, Mingyang Liu, Wei Liu, Pan Zhang, Xiao Sun, Huimin Zhang, Zhenming Li, Lin GuiFrontiers in Bioengineering and Biotechnology 2023 · DOI

Abstract

This work proposes an "N2-1" sacrificial strategy to help to improve the accuracy of the bonding technique from the existing level. The target micropattern is copied N2 times, and (N2-1) of them are sacrificed to obtain the most accurate alignment. Meanwhile, a method for manufacturing auxiliary solid alignment lines on transparent materials is proposed to visualize auxiliary marks and facilitate the alignment. Though the principle and procedure of alignment are straightforward, the alignment accuracy substantially improved compared to the original method. With this technique, we have successfully fabricated a high-precision 3D electroosmotic micropump just using a conventional desktop aligner. Because of the high precision during the alignment, the flow velocity is up to 435.62 μm/s at a driven voltage of 40 V, which far exceeds the previous similar reports. Thus, we believe that it has great potential for high precision microfluidic device fabrications.

Introduction

Building complex, multi-layer microfluidic devices, such as "organs-on-a-chip," requires stacking layers with extreme precision. Currently, researchers face a significant challenge: manual alignment is cost-effective but imprecise (often resulting in errors of tens of microns), while high-end mechanical mask aligners are expensive and frequently incompatible with the rapid nature of plasma bonding. Because materials like PDMS are transparent, alignment marks are difficult to see under a microscope, further complicating the process. This paper introduces a novel approach to achieve high-precision results using standard, low-cost equipment.

Methods

The "N²-1" Sacrificial Strategy

Instead of attempting to align a single pair of micro-features perfectly, the researchers developed an $N \times N$ matrix of patterns on both layers. While the center pattern is designed for "perfect" alignment, every other pattern in the matrix is slightly offset by a tiny increment ($\Delta d$). If the user misses the center target during bonding, one of the other pairs in the matrix will—by sheer mathematical probability—be perfectly aligned. The user then "sacrifices" the $N^2-1$ misaligned pairs to ensure at least one pair is perfect.

Schematic of the N x N sacrificial matrix strategy (A) and the resulting coordinate offsets (B).

Liquid Metal Visualization

To solve the transparency issue of PDMS, auxiliary microchannels were manufactured at the corners of the chips. A liquid metal alloy ($Bi_{32.5}In_{51}Sn_{16.5}$) was injected into these channels to create high-contrast, opaque "guidelines." These marks are easily visible under a standard microscope, allowing for faster and more accurate manual positioning during the critical seconds after plasma treatment.

Key Results

Experimental validation and Python 3.8 simulations demonstrated the effectiveness of this probabilistic approach:

  • Precision: The technique achieved a bonding accuracy as high as 3.415 μm, even when performed manually.
  • Success Rate: Using a 51x51 matrix, the "safe range" for 100% successful alignment was significantly expanded compared to traditional methods.
  • Application Performance: The team fabricated a 3D electroosmotic micropump (EOP) with electrode spacing reduced to just 100 μm. The resulting pump reached a flow velocity of 435.62 μm/s at 40V, a massive improvement over previous reports which typically ranged from 16–27 μm/s.

Discussion and Future Work

The primary trade-off for this enhanced precision is "real estate," as the $N \times N$ matrix requires more space on the chip. However, given the low cost of PDMS, the authors argue this is a negligible expense compared to the performance gains. Future work may involve combining this method with automated computer vision systems to further reduce human error and potentially push alignment into sub-micron territory for even more complex 3D micro-structures.

Summary updated

Abstract

This work proposes an "N2-1" sacrificial strategy to help to improve the accuracy of the bonding technique from the existing level. The target micropattern is copied N2 times, and (N2-1) of them are sacrificed to obtain the most accurate alignment. Meanwhile, a method for manufacturing auxiliary solid alignment lines on transparent materials is proposed to visualize auxiliary marks and facilitate the alignment. Though the principle and procedure of alignment are straightforward, the alignment accuracy substantially improved compared to the original method. With this technique, we have successfully fabricated a high-precision 3D electroosmotic micropump just using a conventional desktop aligner. Because of the high precision during the alignment, the flow velocity is up to 435.62 μm/s at a driven voltage of 40 V, which far exceeds the previous similar reports. Thus, we believe that it has great potential for high precision microfluidic device fabrications.
BibTeX
@inproceedings{li2023precision,
  author = {Qian Li and Zi Ye and Mingyang Liu and Wei Liu and Pan Zhang and Xiao Sun and Huimin Zhang and Zhenming Li and Lin Gui},
  title = {{Precision enhanced alignment bonding technique with sacrificial strategy}},
  booktitle = {Frontiers in Bioengineering and Biotechnology},
  year = {2023},
  doi = {10.3389/fbioe.2023.1105154},
}

Loading related content...

Figure