Precise solid-phase synthesis of CoFe@FeOx nanoparticles for efficient polysulfide regulation in lithium/sodium-sulfur batteries

Yanping Chen, Yu Yao, Wantong Zhao, Lifeng Wang, Haitao Li, Jiangwei Zhang, Baojun Wang, Yi Jia, Riguang Zhang, Yan Yu, Jian LiuNature Communications 2023 · DOI

TL;DR

Researchers have developed a novel solid-phase synthesis method to create precisely structured CoFe@FeOx core-shell nanoparticles. These nanoparticles act as a bifunctional coating for battery separators, effectively regulating polysulfides in lithium-sulfur and sodium-sulfur batteries, leading to significantly improved performance and longevity.

What Problem Does This Paper Address?

Lithium-sulfur (Li-S) and sodium-sulfur (Na-S) batteries hold immense promise for high energy density storage, but their widespread adoption is hindered by the "polysulfide shuttle" effect. In these batteries, intermediate polysulfide species dissolve into the electrolyte and migrate to the anode, leading to capacity fading and poor cycle life. Traditional battery separators, often made of polypropylene, offer little resistance to this shuttle. While various strategies exist to modify separators, achieving both uniform dispersion of functional nanoparticles and precise control over their core-shell structure simultaneously has been a significant challenge, often limited by the complexities and solvent waste associated with wet chemistry methods.

Methods

The core innovation here is a solid-phase synthesis strategy that leverages thermal syngas treatment. The process begins with the pyrolysis of a Co-Fe Prussian blue analogue (PBA) precursor, yielding CoFe@C nanoparticles uniformly dispersed on a carbon matrix. This intermediate then undergoes a crucial transformation under a thermal syngas (H₂/CO) atmosphere at 240°C. During this step, iron atoms preferentially "exsolve" from the CoFe alloy core to the surface, forming a Fe shell. This Fe shell is then carburized by CO to create a FexC intermediate shell. Finally, this FexC shell is passivated by exposure to air at room temperature, resulting in the desired CoFe@FeOx core@shell structure. This method is demonstrated to be universal, applicable to synthesizing MFe@FeOx (where M = Co, Ni, Mn) by simply altering the initial PBA precursor.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Solid-phase synthesis for precise nanostructure control: This work demonstrates that solid-phase synthesis, often overlooked for complex nanostructures, can precisely engineer core@shell architectures with uniform dispersion, overcoming limitations of wet chemistry.
  • "Exsolution" as a key mechanism: The controlled migration of Fe atoms from the CoFe alloy core to the surface, followed by carburization and passivation, is a critical and tunable step in forming the desired core-shell structure.
  • Bifunctional separator modification: The CoFe@FeOx nanoparticles exhibit a dual role: the polar FeOx shell strongly adsorbs polysulfides, while the conductive CoFe alloy core facilitates their electrochemical conversion, synergistically suppressing the shuttle effect.
  • Universality of the strategy: The demonstrated applicability to NiFe@FeOx and MnFe@FeOx suggests this method is a robust platform for creating a range of MFe@FeOx materials for various applications.

Key Results

  • Successful synthesis of CoFe@FeOx core@shell nanoparticles: Characterization techniques like HRTEM, STEM, and elemental mapping confirmed the formation of CoFe alloy cores (~50 nm) surrounded by FeOx shells (~5 nm).
  • Enhanced Li-S battery performance: When used as a separator coating, CoFe@FeOx/PP separators significantly improved Li-S battery performance, showing a high reversible capacity of 320 mAh g⁻¹ after 1200 cycles with nearly 100% Coulombic efficiency at 2 A g⁻¹.
  • Impressive Na-S battery performance: Na-S batteries with CoFe@FeOx/GF separators achieved a high reversible capacity of 320 mAh g⁻¹ after 1200 cycles with excellent Coulombic efficiency. Even with high sulfur loading (70 wt%), a capacity of 935 mAh g⁻¹ was maintained after 150 cycles at 0.2 A g⁻¹.
  • Demonstrated universality: NiFe@FeOx and MnFe@FeOx also showed promising results in Li-S batteries, indicating the broad applicability of the synthesis strategy.

Limitations and Future Work

The paper acknowledges that the FexC intermediate is difficult to characterize directly due to its instability in air. Future work could focus on further exploring the precise mechanisms of exsolution and carburization, potentially using in situ characterization techniques. The authors also suggest that this solid-phase synthesis strategy is not limited to iron-based nanoparticles and could be extended to construct other complex metal nanoparticles in large-scale industrial applications. The universal nature of the strategy opens doors for synthesizing a wider range of MFe@FeOx materials for diverse applications beyond batteries.

Summary updated

Abstract

Complex metal nanoparticles distributed uniformly on supports demonstrate distinctive physicochemical properties and thus attract a wide attention for applications. The commonly used wet chemistry methods display limitations to achieve the nanoparticle structure design and uniform dispersion simultaneously. Solid-phase synthesis serves as an interesting strategy which can achieve the fabrication of complex metal nanoparticles on supports. Herein, the solid-phase synthesis strategy is developed to precisely synthesize uniformly distributed CoFe@FeO<sub>x</sub> core@shell nanoparticles. Fe atoms are preferentially exsolved from CoFe alloy bulk to the surface and then be carburized into a Fe<sub>x</sub>C shell under thermal syngas atmosphere, subsequently the formed Fe<sub>x</sub>C shell is passivated by air, obtaining CoFe@FeO<sub>x</sub> with a CoFe alloy core and a FeO<sub>x</sub> shell. This strategy is universal for the synthesis of MFe@FeO<sub>x</sub> (M = Co, Ni, Mn). The CoFe@FeO<sub>x</sub> exhibits bifunctional effect on regulating polysulfides as the separator coating layer for Li-S and Na-S batteries. This method could be developed into solid-phase synthetic systems to construct well distributed complex metal nanoparticles.
BibTeX
@inproceedings{chen2023precise,
  author = {Yanping Chen and Yu Yao and Wantong Zhao and Lifeng Wang and Haitao Li and Jiangwei Zhang and Baojun Wang and Yi Jia and Riguang Zhang and Yan Yu and Jian Liu},
  title = {{Precise solid-phase synthesis of CoFe@FeOx nanoparticles for efficient polysulfide regulation in lithium/sodium-sulfur batteries}},
  booktitle = {Nature Communications},
  year = {2023},
  doi = {10.1038/s41467-023-42941-9},
}
Figure