Powering E-Textiles Using a Single Thread Radio Frequency Energy Harvesting Rectenna

Mahmoud Wagih, Alex S. Weddell, Steve Beeby2021 · DOI

TL;DR

This paper presents a novel, ultra-low-cost, and flexible "e-textile rectenna" made from a single conductive thread and a compact PCB. This device efficiently harvests ambient radio frequency (RF) energy, demonstrating its potential to power wearable electronics without batteries.

What Problem Does This Paper Address?

Powering the ever-growing field of electronic textiles (e-textiles) presents a significant challenge. Traditional batteries add bulk, weight, and require frequent recharging or replacement, hindering the seamless integration of electronics into clothing. While energy harvesting (EH) offers a promising solution, existing methods often rely on bulky or rigid components, or require specialized materials that are incompatible with flexible textiles. This paper tackles the need for a truly integrated, low-cost, and efficient RF energy harvesting solution specifically designed for e-textiles.

Methods

The core innovation lies in the design and fabrication of a "rectenna" – a device that combines an antenna and a rectifier to convert RF energy into DC power. The authors employ a minimalist approach:

  • Antenna: A single-thread monopole antenna is created by embroidering a silk-coated Litz copper wire onto a standard polyester-cotton fabric. This approach leverages existing textile manufacturing techniques for ease of integration.
  • Rectifier: A compact, low-cost rectifier is fabricated on an ultra-thin flexible polyimide printed circuit board (PCB). This rectifier utilizes a single Schottky diode (Skyworks SMS7630-079) and a simple L-matching network to impedance-match the antenna to the diode.
  • Integration: The thread antenna is directly connected to the microstrip line on the PCB rectifier, forming a unified, flexible rectenna.

The design prioritizes low cost, minimal footprint, and flexibility, crucial for e-textile applications.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Simplicity is Key: The paper demonstrates that a highly effective rectenna can be built using the simplest antenna design (monopole) and a single diode rectifier, challenging the notion that complex designs are always necessary for high performance.
  • Textile Integration: By using conductive threads for the antenna and flexible PCBs for the rectifier, the authors achieve a truly integrated solution that can be seamlessly woven or embroidered into garments.
  • On-Body Performance: The rectenna shows remarkable resilience to the presence of the human body, with only a minor degradation in efficiency, making it suitable for wearable applications.
  • Low-Cost Potential: The use of readily available materials like conductive thread and standard semiconductor devices points towards a highly cost-effective solution for powering e-textiles.

Key Results

The fabricated rectenna demonstrates impressive performance:

  • Frequency Band: Operates effectively across the 868/915 MHz license-free ISM bands.
  • RF-to-DC Efficiency: Achieves up to 55% RF-to-DC power conversion efficiency at 1 mW of RF power.
  • Output Voltage: Provides a 1.8 V DC output when connected to a 6.8 kΩ load.
  • On-Body Efficiency Degradation: Exhibits only a -4.7 dB degradation in total efficiency when placed on-body.
  • Antenna Bandwidth: Maintains its bandwidth on and off-body, with a fractional bandwidth of 4.6% in space and 12.7% on-body.
  • Radiation Efficiency: Achieves a high radiation efficiency of 89% in space.

Limitations and Future Work

The authors acknowledge a few limitations and propose future directions:

  • Inductor Losses: The current rectifier's efficiency is slightly lower than theoretically possible due to losses in the inductor. This could be improved by using a high-Q inductor or a distributed matching network on a less lossy substrate.
  • Large Rectenna Arrays: Future work will focus on investigating large rectenna arrays with DC-combining for higher RF power reception.
  • Mutual Coupling: Reducing mutual coupling between multiple on-body rectennas is another area for future research.
  • Powering Sensor Nodes: The ultimate goal is to utilize this RF power to actively power wearable all-textile wireless sensor nodes.

Summary updated

Abstract

Radio frequency energy harvesting (RFEH) and wireless power transfer (WPT) are increasingly seen as a method of enabling sustainable computing, as opposed to mechanical or solar EH WPT does not require special materials or resonators and can be implemented using low-cost conductors and standard semiconductor devices. This work revisits the simplest antenna design, the wire monopole to demonstrate the lowest-footprint, lowest-cost rectifying antenna (rectenna) based on a single Schottky diode. The antenna is fabricated using a single Litz-wire silk-coated thread, embroidered into a standard textile substrate. The rectifier is fabricated on a compact low-cost flexible printed circuit board (PCB) using ultra-thin polyimide copper laminates to accommodate low-footprint surface mount components. The antenna maintains its bandwidth across the 868/915 MHz license-free band on- and off-body with only −4.7 dB degradation in total efficiency in human proximity. The rectenna achieves up to 55% RF to DC efficiency with 1.8 V DC output, at 1 mW of RF power, demonstrating its suitability as a power-supply unit for ultra-low power e-textile nodes.
BibTeX
@misc{wagih2021powering,
  author = {Mahmoud Wagih and Alex S. Weddell and Steve Beeby},
  title = {{Powering E-Textiles Using a Single Thread Radio Frequency Energy Harvesting Rectenna}},
  year = {2021},
  doi = {10.3390/proceedings2021068016},
}

Loading related content...

Figure