Power Line Detection in Point Clouds with Point-SAM and RANSAC

Christoph Dalitz, Oskar Waedt, Steffen Goebbels, Mahdieh Shamsadini Motlagh, Gabriel GerzabekarXiv 2026 · arXiv

TL;DR

This paper introduces PowLiDFR, a new open-access dataset for power line detection, and demonstrates that combining transformer-based segmentation (Point-SAM) with a specialized 3D catenary RANSAC algorithm significantly improves the automated mapping of electrical infrastructure from LiDAR point clouds. The authors show that unsupervised transfer learning can outperform traditional rule-based methods, while direct 3D geometric modeling proves superior to non-parametric curve-fitting.

What Problem Does This Paper Address?

Maintaining power grids is a massive task, traditionally requiring manual inspection. Airborne LiDAR (Light Detection and Ranging) offers a way to automate this by creating 3D point clouds of corridors. However, two major hurdles remain:

  1. Segmentation: Power lines are thin and often "lost" amidst dense vegetation, ground, and buildings.
  2. Line Identification: Once the points are found, they must be grouped into individual wires. Because wires are flexible, they form a specific curve called a catenary (the shape a hanging chain takes under its own weight).

Existing methods often simplify these curves into straight segments or 2D projections, which loses accuracy. Furthermore, there is a lack of diverse, high-quality public datasets to benchmark these algorithms.

Methods

The researchers tackled the problem in two stages:

1. Background Segmentation

They compared a traditional rule-based approach (which looks at height distributions in vertical tiles) against Point-SAM, a transformer-based 3D segmentation model.

  • The Innovation: Point-SAM usually requires manual "prompts" (clicking on points). The authors developed an unsupervised way to prompt it by using the rule-based method to identify "high-confidence" tiles—areas where there is a large vertical gap between the ground and potential wires—to automatically seed the model.

2. Individual Line Detection

After isolating the power line points, they needed to distinguish individual cables. They compared two methods:

  • Catenary RANSAC: The authors derived mathematical formulas to apply the Random Sample Consensus (RANSAC) algorithm directly to 3D catenary shapes. This allows the model to "guess" a curve from three points and see how many other points fit that curve.
  • TriplClust: A non-parametric baseline that groups points into "filaments" based on local geometry without assuming a specific shape.
Figure 4: Functional form of a catenary according to Eq. (1).

Datasets

The authors introduced the PowLiDFR dataset, derived from the French "LiDAR HD" project.

  • Composition: 25 real-world scenes spanning two pylons each.
  • Diversity: It includes various terrain layouts and point cloud resolutions (ranging from 9 to 45 points/m²).
  • Labels: Points are manually labeled as background, pylons, or individual power lines.
  • Simplification: Due to LiDAR resolution limits, "bundle conductors" (multiple wires grouped together) are treated as a single line.
Figure 1: A bundle conductor with four cables, which are considered as a single power line in the present study.

Key Insights and Ideas

  • Point-SAM is robust: The model only needs about 20–30 sample points per class to reach peak performance, making it highly efficient for semi-supervised tasks.
  • Geometry beats generic clustering: Because power lines follow strict physical laws, the parametric RANSAC approach is much more effective than non-parametric methods like TriplClust.
  • Bridging the Gaps: RANSAC can "jump" across gaps in the data (caused by occlusion or sensor failure) because it follows a mathematical model, whereas non-parametric methods tend to split a single line into multiple fragments when data is missing.
Figure 8: Comparison of errors. RANSAC (a) might miss a line, but TriplClust (b) frequently splits a single line into multiple parts.

Key Results

  • Segmentation: The unsupervised Point-SAM approach outperformed the rule-based method, showing an average improvement in $F_1$ score of 0.15.
  • Line Detection: On ground-truth data, RANSAC correctly identified 87 lines compared to only 25 for TriplClust. TriplClust struggled significantly with "over-segmentation," often splitting a single wire into 20 or more fragments.
  • Robustness: Point-SAM proved to be quite stable; its performance didn't fluctuate wildly based on which specific points were chosen as prompts, provided they were from the correct class.

Limitations and Future Work

  • Pylon Assumption: The study assumes pylon positions are already known from cadastral (land registry) data. Future iterations could integrate automated pylon detection.
  • Bundle Resolution: The current LiDAR resolution cannot distinguish between individual wires in a bundle. Higher-resolution sensors or specialized deep learning models might be needed for finer detail.
  • Unsupervised Refinement: While Point-SAM performed well, the authors suggest that training a deep neural network specifically on the PowLiDFR dataset could yield even better results than general-purpose transfer learning.

Summary updated

Abstract

This article deals with the problem of detecting the position of power lines in airborne laser scanning point clouds. We address both the problem of segmenting power lines from background like ground and vegetation and of identifying individual lines. For segmentation we compare a rule-based approach with one based on transfer learning (Point-SAM). For individual line detection, we derive the mathematical formulas for RANSAC applied to 3D catenaries and compare it with a non-parametric method (TriplClust). All methods are evaluated on a newly created dataset "PowLiDFR", which we make publicly available. The samples have been taken from the French project LiDAR HD and cover a variety of terrain layouts and point cloud resolutions. On this dataset, an unsupervised transfer learning outperformed a mere rule-based segmentation, and for individual power line detection, RANSAC was better in following the shape of catenaries than the non-parametric algorithm.
BibTeX
@misc{dalitz2026power,
  author = {Christoph Dalitz and Oskar Waedt and Steffen Goebbels and Mahdieh Shamsadini Motlagh and Gabriel Gerzabek},
  title = {{Power Line Detection in Point Clouds with Point-SAM and RANSAC}},
  year = {2026},
  eprint = {2611.21438},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2611.21438},
}
Figure