Polymer-Derived Nitrogen-Doped Carbon Nanosheet Cluster and Its Application for Water Purification

Xiaoyan Yu, Ting Zheng, Srikanth PillaMacromol—A 2021 · DOI

TL;DR

Researchers have developed a straightforward method to create nitrogen-doped carbon nanosheet clusters from a polymer precursor. These novel carbon materials exhibit a high surface area and show promise for efficiently removing organic dyes from water, particularly at an optimal pyrolysis temperature of 750°C.

What Problem Does This Paper Address?

The purification of water from organic contaminants is a critical environmental challenge. While porous carbons (PCs) are known for their excellent adsorption properties due to their high surface area and chemical stability, their synthesis often relies on traditional methods using natural products or complex bottom-up approaches. This paper addresses the need for a more controlled and tunable method to synthesize advanced porous carbon materials with specific architectures and functionalities for applications like water purification. The authors aim to create nitrogen-doped carbon nanosheets with a well-defined structure derived from a polymer precursor, offering a potentially more efficient and cost-effective route compared to existing methods.

Methods

The core of this research lies in a two-step process:

  1. Synthesis of Polyazomethine (PAM) Precursor: PAM was synthesized via a facile condensation reaction between p-phenylenediamine and terephthalaldehyde in methanol. A key aspect of this step is the controlled solvent evaporation, which leads to the self-assembly of PAM molecules into crystalline nanosheet clusters with a sheet thickness of approximately 50 nm. This controlled self-assembly is crucial for achieving the desired nanostructure.
  2. Pyrolysis to Nitrogen-Doped Carbon Nanosheets (NCs): The synthesized PAM was then subjected to pyrolysis at various temperatures (300, 450, 600, 750, and 900 °C) under a nitrogen atmosphere. This high-temperature treatment converts the polymer into nitrogen-doped carbon nanosheets (NCs), retaining the nanosheet cluster architecture. The nitrogen doping is inherent from the polymer precursor.

The resulting materials were characterized using a suite of techniques including:

  • FTIR and Raman Spectroscopy: To confirm the formation of imine bonds and the presence of graphitic structures.
  • Thermogravimetric Analysis (TGA): To assess thermal stability and determine carbonization stages.
  • Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM): To visualize the morphology, nanosheet structure, and lattice fringes.
  • X-ray Diffraction (XRD): To analyze the crystalline structure and the transition to graphitic carbon.
  • X-ray Photoelectron Spectroscopy (XPS): To confirm the presence and types of nitrogen and oxygen doping.
  • Brunauer-Emmett-Teller (BET) analysis: To determine the specific surface area.

Finally, the water purification capacity was evaluated by measuring the adsorption of Rhodamine B (RhB), a model organic dye, from aqueous solutions.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of novel materials and their performance in a specific application, rather than training on or evaluating against existing datasets.

Key Insights and Ideas

  • Controlled Self-Assembly for Nanostructure: The controlled solvent evaporation during PAM synthesis is a critical step that dictates the formation of well-defined nanosheet clusters, which are then preserved during pyrolysis. This highlights the power of "bottom-up" molecular design.
  • Preservation of Architecture: The nanosheet cluster architecture, formed at the molecular level, is remarkably maintained even after high-temperature carbonization, leading to porous carbon materials with inherent structural order.
  • Pyrolysis Temperature as a Key Parameter: The pyrolysis temperature significantly influences the properties of the resulting NCs, particularly their specific surface area and defect density, which directly impact their adsorption capabilities.
  • Nitrogen Doping Enhances Functionality: The inherent nitrogen doping from the polyazomethine precursor is crucial for the observed adsorption properties, likely by creating active sites and influencing surface chemistry.
  • Synergy of Surface Area and Surface Chemistry: The highest adsorption capacity is achieved at 750 °C, suggesting a critical balance between high surface area and favorable surface conditions (e.g., defect sites, nitrogen doping) for RhB adsorption.

Key Results

  • Nanosheet Cluster Formation: The synthesis successfully produced polyazomethine (PAM) in the form of nanosheet clusters with a sheet thickness of approximately 50 nm.
  • Porous Carbon Nanosheets: Pyrolysis converted PAM into porous nitrogen-doped carbon nanosheets (NCs) with specific surface areas up to 700 m²/g.
  • Optimal Adsorption Performance: The NC pyrolyzed at 750 °C exhibited the highest adsorption capacity for Rhodamine B, reaching 0.025 mg/mg.
  • Correlation with Surface Area: The adsorption capacity generally increased with increasing pyrolysis temperature up to 750 °C, correlating with higher specific surface areas.
  • Nitrogen and Oxygen Doping Confirmed: XPS analysis confirmed the presence of nitrogen and oxygen doping in the graphitic structure of the NCs.

Limitations and Future Work

Limitations: * The study primarily focuses on the removal of Rhodamine B. While this is a good model contaminant, the performance with a wider range of organic pollutants is not yet explored. * The paper notes that the absorption kinetics of CN-750 were "not presented" due to being too fast, implying that while effective, the exact rate might be difficult to precisely quantify with standard methods. * While the authors suggest potential applications in electronics, catalysis, and energy storage, these are speculative and require further investigation.

Future Work: * The authors explicitly suggest exploring the utility of these PAM-based COF-derived PCs in various other areas, including electronics, optoelectronics, catalysis, and photovoltaics. * Further research could focus on optimizing the synthesis and pyrolysis conditions to fine-tune the pore structure and surface chemistry for specific applications. * Investigating the adsorption of a broader spectrum of organic pollutants and real-world wastewater samples would be a valuable next step. * Exploring different polymer precursors or co-doping strategies could lead to even more advanced carbon materials.

Summary updated

Abstract

A series of nitrogen-doped carbons (NCs) were prepared by the pyrolysis (300–900 °C) of crystalline polyazomethine (PAM) synthesized via a facile condensation reaction in methanol solvent. The controlled solvent evaporation resulted in PAM crystals in the form of nanosheet clusters with a sheet thickness of ~50 nm. Such architecture was maintained after pyrolysis, obtaining porous CNs of high specific surface areas of up to 700 m2/g. The resulting NCs were used as absorbents to remove aromatic Rhodamine B from water. The NC that pyrolyzed at 750 °C exhibited the highest adsorption capacity (0.025 mg/mg), which is attributed to its high surface area and surface condition.
BibTeX
@inproceedings{yu2021polymer,
  author = {Xiaoyan Yu and Ting Zheng and Srikanth Pilla},
  title = {{Polymer-Derived Nitrogen-Doped Carbon Nanosheet Cluster and Its Application for Water Purification}},
  booktitle = {Macromol—A},
  year = {2021},
  doi = {10.3390/macromol1020007},
}
Figure