Pneumatic–Cable-Hybrid-Driven Multi-Mechanism End Effector and Cross-Surface Validation

Zhongyuan Wang, Zhiyuan Weng, Peiqing Zhang, Wei Jiang, Nan Deng, Zhouyi WangBiomimetics 2026 · DOI

TL;DR

This paper introduces a novel, lightweight end effector for wall-climbing robots that seamlessly switches between claw-based interlocking and vacuum suction for adhesion on both rough and smooth surfaces. This hybrid approach overcomes the limitations of single-mechanism grippers, enabling robots to navigate diverse environments reliably.

What Problem Does This Paper Address?

Wall-climbing robots are crucial for applications like aerospace maintenance and infrastructure inspection. However, a significant challenge is designing end effectors that can reliably adhere to and move across surfaces with vastly different properties – from ultra-smooth glass to rough, irregular textures. Existing adhesion methods, like vacuum suction, excel on smooth surfaces but fail on rough ones due to leakage. Conversely, claw-based or micro-spine mechanisms are effective on rough surfaces but lack grip on smooth ones. This necessitates robots to either carry multiple specialized end effectors or be limited to specific environments. The authors aim to solve this by developing a single, adaptable end effector that integrates multiple adhesion strategies.

Methods

The core of the proposed solution is a flexible, bio-inspired end effector that combines two distinct adhesion mechanisms:

  • Claw-based Interlocking: Inspired by insect claws, this mechanism uses flexible telescopic cavities that, when actuated pneumatically, allow small, sharp claws to engage with surface protrusions on rough terrain. A contact force model was developed to analyze the interlocking mechanism and determine optimal geometric parameters for the claws.
  • Vacuum Suction: A root vacuum suction cup is integrated for adhesion on smooth surfaces. This is designed with an elliptical shape to avoid interference with the claw mechanism.

These two mechanisms are driven by a pneumatic-cable hybrid system. Pneumatic pressure controls the deformation of the telescopic cavities and the suction cup, while a cable-driven system, inspired by animal tendons, provides dynamic self-adaptation and assists with load-bearing, enhancing stability and adaptability. Finite element simulations (ABAQUS) were used to analyze the structural parameters of the telescopic cavities.

Datasets

Not discussed in the paper. The experiments used custom-built test substrates representing various rough and smooth surfaces, including planes and curved surfaces with different mesh sizes and curvature radii.

Key Insights and Ideas

  • Synergistic Adhesion: The true innovation lies in the synergistic integration of two fundamentally different adhesion mechanisms (interlocking and suction) into a single, compact end effector.
  • Pneumatic-Cable Hybrid Control: Using pneumatic pressure for primary adhesion and cable-driven actuation for fine-tuning and load support offers a versatile and efficient control strategy.
  • Bio-inspiration: The design draws inspiration from natural systems (insect claws, animal tendons) to achieve robust and adaptable adhesion.
  • Adaptive Switching: The system implicitly switches adhesion modes based on surface feedback (vacuum pressure), eliminating the need for explicit surface classification by the robot.
  • Lightweight Design: The focus on a lightweight, integrated solution is crucial for mobile robots where payload capacity is a significant constraint.

Key Results

  • Smooth Surfaces: The suction cup achieved significant adhesion forces, with a normal adsorption force of 10.51 N and a tangential adsorption force of 8.70 N at -60 kPa negative pressure on a smooth acrylic plate.
  • Rough Surfaces: The claw mechanism demonstrated strong adhesion on rough surfaces, particularly on a 15-mesh surface, where tangential adhesion force reached 21.02 N and normal adhesion force peaked at 7.74 N at -60 kPa. The performance varied with surface mesh size, indicating the importance of protrusion scale and density.
  • Curved Surfaces: Adhesion forces on rough curved surfaces showed an optimal negative pressure range, with tangential adhesion peaking around -40 kPa and normal adhesion peaking slightly earlier.
  • Robot Climbing: The integrated end effector enabled a wall-climbing robot to successfully and stably climb 90° vertical rough and smooth planes, as well as rough and smooth curved surfaces, demonstrating its cross-surface adaptability.

Limitations and Future Work

  • Wear and Fatigue: The authors acknowledge the need to evaluate the wear resistance and fatigue life of the telescopic cavity under prolonged rough-surface friction and suggest exploring material modifications and protective coatings.
  • Individual Mechanism Contributions: Future work will involve ablation/decoupling experiments to quantify the specific contributions of each adhesion mechanism and optimize their coupling.
  • Long-Term Testing: Robot-level tests across a wider range of diverse surfaces and loads are planned to benchmark climbing speed, stability, and energy efficiency.
  • Torsional Stiffness: Insufficient torsional stiffness in the flexible structure might lead to slight rotation or rebound under low negative pressure or uneven loading, potentially causing minor deviations in movement.
  • Claw Tip Strength: The paper notes that if claw tip strength is insufficient, there's a risk of plastic failure under repeated high loads.

Summary updated

Abstract

Wall-climbing robots are increasingly required for applications in aerospace, high-altitude operations, and complex environmental monitoring, where they must maintain reliable adhesion and continuous mobility across surfaces with rapidly changing material properties and roughness. Achieving these demands requires lightweight systems with end effectors that integrate multi-surface adaptability and load-carrying capacity. Current single adhesion mechanisms are typically effective only under specific wall conditions, making it challenging to achieve stable, continuous adhesion and detachment on surfaces with significantly different roughness. To address this limitation, we propose a flexible, multi-mechanism coupled end effector driven by a pneumatic-cable hybrid system, integrating two complementary adhesion mechanisms-claw-based interlocking and vacuum suction-into a unified flexible structure. First, we develop the overall structural framework of the end effector and conduct finite element simulations to analyze key structural parameters of the telescopic cavity. We then establish a contact force model between the claw and vertical rough surfaces to clarify the interlocking adhesion mechanism and determine critical geometric parameters. Based on these analyses, a cable-driven adjustment mechanism is introduced to enable dynamic self-adaptation and assist with load-bearing during adhesion, enhancing the stability and load-carrying capacity under varying wall conditions. On rough surfaces, the end effector achieves reliable adhesion through claw interlocking, while on smooth surfaces, it maintains stable attachment through vacuum suction. Furthermore, it supports seamless switching between adhesion modes on different surfaces. When integrated into a wall-climbing robot, the system enables stable adhesion and detachment on both rough and smooth surfaces, providing a feasible solution for the lightweight, integrated design of end effectors for multi-surface adaptive wall-climbing robots.
BibTeX
@inproceedings{wang2026pneumaticcable,
  author = {Zhongyuan Wang and Zhiyuan Weng and Peiqing Zhang and Wei Jiang and Nan Deng and Zhouyi Wang},
  title = {{Pneumatic–Cable-Hybrid-Driven Multi-Mechanism End Effector and Cross-Surface Validation}},
  booktitle = {Biomimetics},
  year = {2026},
  doi = {10.3390/biomimetics11020140},
}
Figure