Phosphine-free synthesis and optical properties of Mn:ZnSe/ZnS core/shell nanocrystals

Xing Ming, Huaibin Shen, Chengbai Liu, HongZhe Wang, LinSong Li, Xia Chen, Xiaojuan Qi, Huiling ZhaoScientia 2011 · DOI

Abstract

High-quality Mn:ZnSe/ZnS nanocrystals were successfully synthesized using an environmentally friendly method. Selenium powder was dissolved directly into octadecene to form a Se precursor without the assistance of phosphine complexes. To improve the quantum yield (QY) and stability of the as-synthesized nanocrystals, a ZnS shell was introduced via epitaxial growth to form Mn:ZnSe/ZnS core-shell nanocrystals. Characterization using absorption spectroscopy, photoluminescence (PL) spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM) demonstrated that both Mn:ZnSe and Mn:ZnSe/ZnS possess good monodispersity with cubic zinc blende structures. The PL QY of the Mn:ZnSe/ZnS nanocrystals reached as high as 60%. The fundamental mechanisms and effects of ZnS shell thickness and Mn²⁺ dopant concentration on PL emission were also evaluated.

Introduction

Semiconductor nanocrystals, or quantum dots, are highly valued for their tunable optical properties. However, traditional synthesis of II-VI materials like ZnSe typically requires organophosphine solvents such as trioctylphosphine (TOP) or trioctylphosphine oxide (TOPO). These chemicals are toxic, unstable, expensive, and require specialized handling. This study presents a "green," phosphine-free colloidal synthesis approach to produce high-quality Mn:ZnSe/ZnS core-shell structures that maintain high performance while being safer and more scalable.

Methods

The researchers employed a phosphine-free colloidal synthesis. Instead of using TOP, elemental Selenium was dissolved directly into octadecene (ODE), a safer non-coordinated solvent. Mn:ZnSe cores were formed by reacting manganese stearate with the Se-ODE and zinc precursors at 260°C. To enhance brightness and stability, a ZnS shell was grown using a layer-by-layer epitaxial approach, injecting Zinc and Sulfur precursors at intervals to ensure uniform shell growth. Structural analysis was performed using XRD and TEM, while optical properties were measured via UV-Vis and PL spectroscopy, using Rhodamine 590 as a quantum yield standard.

Results and Discussion

Structural Characterization

XRD analysis confirmed that the synthesized nanocrystals possess a cubic zinc blende structure, matching JCPDS standard cards for ZnSe and ZnS. The diffraction peaks for the (111), (220), and (311) planes are clearly visible, indicating high crystallinity.

XRD patterns of ZnSe and ZnS nanocrystals confirming the cubic zinc blende structure.

TEM imaging revealed monodisperse particles. The Mn:ZnSe cores were approximately 5.0 nm in diameter, increasing to roughly 7.0 nm after the addition of the ZnS shell. High-resolution TEM (HRTEM) showed clear lattice fringes with a spacing of 0.32 nm, further confirming the excellent crystallinity of the core-shell structures.

TEM and HRTEM images showing (a) Mn:ZnSe cores, (b) Mn:ZnSe/ZnS core/shell nanocrystals, and (c) lattice fringes.

Optical Properties and Doping

By coating the Mn:ZnSe core with a wider-bandgap ZnS shell, a "Type-I" heterostructure was created. This configuration confines charge carriers within the core, preventing surface quenching and significantly boosting brightness. In these doped nanocrystals, energy is transferred to the Manganese ions, resulting in a stable orange-yellow emission (580–600 nm) via $d$-orbital transitions ($^4T_1$ to $^4A_1$).

Optimal results were achieved with three layers of ZnS shell and a 20% molar ratio of Mn to Zn. Beyond these levels, lattice defects or concentration quenching began to reduce light intensity. The final Mn:ZnSe/ZnS nanocrystals achieved a photoluminescence quantum yield (QY) of over 60%, with a narrow full-width at half-maximum (FWHM) of approximately 55 nm.

Conclusion

This study demonstrates a successful phosphine-free synthesis for high-efficiency Mn:ZnSe/ZnS nanocrystals. While the results are competitive with traditional methods, future work will focus on fine-tuning the core-shell interface for long-term stability and testing these materials in practical applications such as LEDs and bio-imaging markers. Scaling this "green" method for industrial production remains a key objective.

Summary updated

Abstract

High quality Mn:ZnSe/ZnSe nanocrystals were successfully synthesized using an environmentally friendly method. Selenium powder was dissolved directly into octadecene to form Se precursor without the assistance of phosphine complexes. To improve the quantum yield (QY) and stability of as-synthesized nanocrystals, ZnS shell was introduced by epitaxy growth technique to form Mn:ZnSe/ZnS core-shell nanocrystals. Absorption spectroscopy, photoluminescence (PL) spectroscopy, X-ray diffaraction, and transmission electron microscopy were used to characterize the property and structure of as-synthesized nanocrystals. The results demonstrated that both Mn:ZnSe and Mn:ZnSe/ZnS have a good monodispersity with cubic zinc blende structures. The PL QY of as-synthesized Mn:ZnSe/ZnS nanocrystals could reach as high as 60%. The fundamental mechanism and effects of ZnS shell thickness and Mn<sup>2+</sup> dopant concentration on the PL emission were also discussed preliminarily.
BibTeX
@inproceedings{ming2011phosphine,
  author = {Xing Ming and Huaibin Shen and Chengbai Liu and HongZhe WANG and LinSong LI and Xia Chen and Xiaojuan Qi and Huiling Zhao},
  title = {{Phosphine-free synthesis and optical properties of Mn:ZnSe/ZnS core/shell nanocrystals}},
  booktitle = {Scientia},
  year = {2011},
  doi = {10.1360/032010-290},
}
Figure