Performance of Metal Compound Catalysts for Coke Gasification Reaction

Liangguo Lyu, Yuanpei Luo, Shengping Zhang, Fei Dai2024 · DOI

TL;DR

This paper evaluates how different metal catalysts—alkali, alkaline earth, transition, and rare earth metals—impact the gasification of coal coke using $CO_2$. The researchers found that potassium carbonate ($K_2CO_3$) is the most effective catalyst, especially when applied via a wet mixing method, significantly lowering reaction times and achieving nearly total carbon conversion at 1173K.

What Problem Does This Paper Address?

As the world moves toward "carbon neutrality," finding ways to use coal more cleanly and efficiently is critical. Conventional coal gasification is an energy-intensive process that typically requires temperatures above 1273K and pure oxygen.

The authors focus on the Boudouard reaction ($C + CO_2 \rightarrow 2CO$), which turns $CO_2$ and coal char into carbon monoxide, a valuable feedstock for the chemical industry. The challenge is that this reaction is slow and energy-hungry. Catalysts can lower the required temperature and speed up the reaction, but we need to know which metals work best and how the way we mix them with coal affects their performance.

Methods

The researchers used a self-made fixed-bed reactor system equipped with gas flow controls, electric heating, and an Agilent chromatograph for gas analysis.

They tested four specific catalysts:

  • Alkali metal: $K_2CO_3$
  • Rare earth: $CeO_2$
  • Alkaline earth: $CaO$
  • Transition metal: $Fe_2O_3$

A key variable was the preparation method:

  1. Dry Mixing: Physically grinding the catalyst and coal char together.
  2. Wet Mixing: Dissolving the catalyst in water, stirring it with the coal char for 12 hours, and then drying it. This is intended to create a more uniform distribution of the metal on the coal surface.

The team also used Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), and X-ray Diffraction (XRD) to characterize the physical and chemical structure of the coal before and after the reaction.

Datasets

As an experimental chemistry paper, this study does not use digital datasets. Instead, it utilizes:

  • Coal Char: Produced by the Distributed Laboratory of the Institute of Engineering Thermophysics (DLIET).
  • Analytical Reagents: High-purity $K_2CO_3$, $CeO_2$, $CaO$, and $Fe_2O_3$ used as catalysts.
  • Reaction Gases: High-purity $N_2$ (99.99%) for protection and $CO_2$ (99.99%) as the reactant.

Key Insights and Ideas

  • The "Wet Mixing" Advantage: Wet mixing consistently outperformed dry mixing. By dissolving the catalyst, the metal ions can penetrate the pores of the coal char and precipitate more uniformly. This creates more "active sites" where the gasification reaction can occur.
  • Potassium's Redox Cycle: $K_2CO_3$ works through a four-step cyclic redox mechanism. It is first reduced by the carbon, then oxidized by the $CO_2$ atmosphere, effectively acting as an electron shuttle that breaks carbon bonds more easily.
  • Cerium’s Oxygen Storage: $CeO_2$ (Ceria) proved to be a strong runner-up. Its effectiveness stems from its "fluorite" crystal structure, which allows it to store and release oxygen atoms easily, creating oxygen vacancies that facilitate the $CO_2$ reduction.
  • The Baseline Effect: Interestingly, $CaO$ and $Fe_2O_3$ showed very little catalytic effect in this study. The authors discovered via XRD that the raw coal char already contained significant amounts of Calcium and Iron. Adding more didn't help because the "baseline" catalytic effect was already present.

Key Results

  • Top Performer: $K_2CO_3$ using wet mixing achieved a 98.8% carbon conversion rate.
  • Reaction Speed: The time required to reach 50% conversion ($\tau_{50\%}$) for the $K_2CO_3$ wet-mixed sample was only 40.6 minutes.
  • Gas Quality: Without a catalyst, $CO$ concentration in the produced gas was about 69.9%. With $K_2CO_3$, it jumped to over 95-96% and stayed there for nearly an hour.
  • Performance Ranking: The overall order of catalytic effectiveness was determined to be: $K_2CO_3 > CeO_2 > CaO \approx Fe_2O_3$.

Limitations and Future Work

The authors note that the lack of impact from $CaO$ and $Fe_2O_3$ might be specific to the type of coal char used, which was already rich in those minerals. Future research could test these catalysts on "cleaner" or de-ashed coal to see if their catalytic potential is masked here.

Additionally, while $K_2CO_3$ is the most effective, alkali metals can sometimes cause "slagging" or fouling in industrial reactors. Future work might look at optimizing the $CeO_2$ (rare earth) approach, as it showed promising results with potentially fewer operational headaches.

Summary updated

Abstract

With the excessive use of fossil energy and concern for environmental protection, coal coke gasification as an clean means of energy utilization has received widespread attention worldwide.Coal catalytic gasification is an effective way to realize clean coal utilization.The catalytic gasification technology of coke and CO 2 has the advantages of low reaction temperature, small energy consumption and low CO 2 emission.In this study, the catalytic effect of alkali metals, alkaline earth metals, transition metals and rare earth on the reaction between coke and CO 2 was investigated by using a selfmade gas-solid reaction device.It was concluded that in the gasification reaction between coal coke and CO 2 at 1173K, the performance of K 2 CO 3 catalyst was the best.Under the condition of wet mixing, the conversion rate of K 2 CO 3 was 98.8%, and 50% was 40.6min.The metal compound catalyst of Ca, Fe in wet mixing and dry mixing conditions had little effect on the coal coke -CO 2 gasification.Thus, K and Ce was kinds of efficient catalyst and will be used as a promising catalyst for coal char CO 2 gasification.
BibTeX
@misc{lyu2024performance,
  author = {Liangguo Lyu and Yuanpei Luo and Shengping Zhang and Fei Dai},
  title = {{Performance of Metal Compound Catalysts for Coke Gasification Reaction}},
  year = {2024},
  doi = {10.46855/energy-proceedings-11307},
}
Figure