Pd-Functionalized SnO2 Nanofibers Prepared by Shaddock Peels as Bio-Templates for High Gas Sensing Performance toward Butane

Rongjun Zhao, Zhezhe Wang, Yue Yang, Xinxin Xing, Tong Zou, Zidong Wang, Ping Hong, Sijia Peng, Yefei WangNanomaterials 2018 · DOI

TL;DR

Researchers have developed a novel method to create highly sensitive and selective butane gas sensors using shaddock peels as bio-templates for SnO₂ nanofibers. The resulting 5 mol% Pd-functionalized SnO₂ nanofiber sensors demonstrate excellent performance, including a low detection limit of 10 ppm and rapid response times, making them promising for real-time butane leak detection.

What Problem Does This Paper Address?

Precise and reliable detection of butane gas is crucial due to its widespread use in liquefied petroleum gas (LPG) and its flammability. Accidental butane leaks can pose significant environmental and safety hazards, including explosions and health risks. Existing gas sensors often struggle with limitations such as low response, poor selectivity, slow response/recovery times, and high operating temperatures, hindering their practical application for real-time monitoring. This paper aims to address these limitations by developing a new gas sensing material with enhanced performance characteristics for butane detection.

Methods

The core of this research lies in the synthesis of Pd-functionalized SnO₂ nanofibers using a facile hydrothermal method with shaddock peels as bio-templates. The shaddock peels provide a natural 1D fibrous structure that is replicated by the SnO₂ material during the hydrothermal process. After carbonization of the bio-template, palladium (Pd) nanoparticles are introduced at varying concentrations (0, 1, 3, 5, and 7 mol%). The resulting powders are then annealed to form the final sensing material.

Key characterization techniques employed include:

  • X-ray Diffraction (XRD): To confirm the crystal structure of the SnO₂.
  • Field-Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM/HRTEM): To visualize the morphology, microstructure, and confirm the presence and distribution of Pd nanoparticles.
  • X-ray Photoelectron Spectroscopy (XPS): To analyze the surface chemistry and elemental composition, including the oxidation states of Sn and the presence of Pd.
  • Brunauer-Emmett–Teller (BET) analysis: To determine the specific surface area and pore size distribution, which are critical for gas sensing.

Gas sensors were fabricated by coating the synthesized powders onto alumina ceramic tubes with Au electrodes. Gas-sensing performance was evaluated using a commercial gas-sensing measurement system, measuring parameters like response, selectivity, detection limit, response/recovery times, repeatability, and long-term stability.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of a novel material and its performance evaluation in a controlled laboratory setting.

Key Insights and Ideas

  • Bio-templating for Nanostructure Control: Shaddock peels, a readily available and eco-friendly material, proved to be an effective bio-template for creating well-defined 1D SnO₂ nanofibers. This approach offers a simple and cost-effective way to achieve desired nanostructures that are difficult to obtain through conventional methods.
  • Synergistic Effect of Pd and Nanofiber Morphology: The combination of the 1D nanofiber structure (providing a large surface area and porosity) and Pd functionalization (acting as a catalyst) significantly enhances butane sensing performance. The 5 mol% Pd concentration appears to be optimal, balancing catalytic activity with potential aggregation issues.
  • "Spillover Effect" of Pd: The research highlights the role of Pd in promoting the adsorption and dissociation of oxygen molecules on the SnO₂ surface, leading to a more efficient reaction with butane. This "spillover effect" is a key factor in the improved sensing capabilities.
  • Low-Temperature Operation: The optimal operating temperature for the best-performing sensor was found to be 260 °C, which is relatively low compared to some other metal oxide gas sensors, contributing to energy efficiency.
  • Cost-Effectiveness and Environmental Friendliness: The use of shaddock peels as bio-templates aligns with the growing trend towards sustainable and environmentally friendly materials in sensor development.

Key Results

  • Optimal Pd Concentration: The sensor fabricated with 5 mol% Pd-functionalized SnO₂ nanofibers exhibited the highest gas response to butane.
  • High Gas Response: A response of 47.58 ± 2.11 was achieved for 3000 ppm butane at 260 °C.
  • Low Detection Limit: The sensor could detect butane down to 10 ppm with a response of 1.38 ± 0.26.
  • Rapid Response/Recovery: Response and recovery times were remarkably fast, at 3.20 s and 6.28 s, respectively, for 3000 ppm butane.
  • Good Selectivity: The sensor showed a higher response to butane compared to methane, hydrogen, and carbon monoxide.
  • Excellent Repeatability and Stability: The sensor demonstrated good reproducibility over six cycles and long-term stability over 30 days of testing.
  • Large Specific Surface Area: The 5 mol% Pd-functionalized SnO₂ nanofibers possessed a specific surface area of 44 m²/g, contributing to enhanced sensing.

Limitations and Future Work

  • Limited Gas Range Tested: While selectivity was assessed for methane, hydrogen, and carbon monoxide, a broader range of interfering gases could be tested to fully understand the sensor's practical applicability.
  • Optimization of Pd Concentration: While 5 mol% Pd was found to be optimal, further fine-tuning of Pd concentration and potentially exploring other noble metals or co-doping could lead to even better performance.
  • Long-Term Real-World Testing: While long-term stability was demonstrated in the lab, real-world environmental conditions (humidity, dust, etc.) could impact performance, and further testing in such environments would be beneficial.
  • Scalability of Production: The paper describes a facile hydrothermal method, but the scalability of producing these bio-templated nanofibers for mass production would be an important consideration for commercialization.

The authors suggest that the unique 1D structure and Pd functionalization make these nanofibers a promising material for practical butane detection applications. Future work could focus on exploring these materials for other target gases or integrating them into portable sensing devices.

Summary updated

Abstract

Pd-functionalized one-dimensional (1D) SnO₂ nanostructures were synthesized via a facile hydrothermal method and shaddock peels were used as bio-templates to induce a 1D-fiber-like morphology into the gas sensing materials. The gas-sensing performances of sensors based on different ratios of Pd-functionalized SnO₂ composites were measured. All results indicate that the sensor based on 5 mol % Pd-functionalized SnO₂ composites exhibited significantly enhanced gas-sensing performances toward butane. With regard to pure SnO₂, enhanced levels of gas response and selectivity were observed. With 5 mol % Pd-functionalized SnO₂ composites, detection limits as low as 10 ppm with responses of 1.38 ± 0.26 were attained. Additionally, the sensor exhibited rapid response/recovery times (3.20/6.28 s) at 3000 ppm butane, good repeatability and long-term stability, demonstrating their potential in practical applications. The excellent gas-sensing performances are attributed to the unique one-dimensional morphology and the large internal surface area of sensing materials afforded using bio-templates, which provide more active sites for the reaction between butane molecules and adsorbed oxygen ions. The catalysis and "spillover effect" of Pd nanoparticles also play an important role in the sensing of butane gas as further discussed in the paper.
BibTeX
@inproceedings{zhao2018pd,
  author = {Rongjun Zhao and Zhezhe Wang and Yue Yang and Xinxin Xing and Tong Zou and Zidong Wang and Ping Hong and Sijia Peng and Yefei Wang},
  title = {{Pd-Functionalized SnO2 Nanofibers Prepared by Shaddock Peels as Bio-Templates for High Gas Sensing Performance toward Butane}},
  booktitle = {Nanomaterials},
  year = {2018},
  doi = {10.3390/nano9010013},
}
Figure