Passively Sensing SARS-CoV-2 RNA in Public Transit Buses

Jason S. Hoffman, Matthew Hirano, Nuttada Panpradist, Joseph Breda, Parker S. Ruth, Yuanyi Xu, Jonathan Lester, Bichlien H. Nguyen, Luís Ceze, Shwetak PatelmedRxiv 2021 · DOI

Abstract

Affordably tracking the transmission of respiratory infectious diseases in urban transport infrastructures can inform individuals about potential exposure and guide public policymakers. We designed and tested a method to detect SARS-CoV-2 RNA in the air filters of public buses, revealing that air filters could be used as passive fabric sensors. We placed and retrieved filters in the existing HVAC systems of public buses in Seattle, Washington, from August 2020 to March 2021. SARS-CoV-2 RNA was detected in 14% (5/37) of filters. This sensing system is feasible and, if scaled, could provide a unique lens into geographically relevant transmission by pooling samples of riders over time without installing additional systems.

Introduction: The Need for Granular Surveillance

While individual clinical testing is essential, it is resource-intensive and often lags behind community transmission. Environmental surveillance, such as wastewater testing, offers a broader view but lacks geographic granularity. Public transit buses, which circulate through specific neighborhoods and pool the respiratory output of hundreds of daily riders, represent a unique "rider vector." This study explores leveraging existing bus HVAC systems as a mobile, passive surveillance network to fill the gap between broad wastewater data and individual tests.

Methods and Materials

The researchers conducted a sampling campaign between August 2020 and March 2021 using 15 buses from the Seattle King County Metro fleet. The study generated an original environmental dataset of 82 total samples.

Sampling Techniques

  1. Passive Air Sensing: Small (5 $cm^2$) supplementary filter materials (biopsy pads, PolyPro fabric, cellulose ester filters) were installed inside bus HVAC systems for at least seven days to accumulate airborne particles.
  2. Surface Swabbing: EnviroMax swabs were used on high-touch areas like handrails to compare airborne detection with surface contamination.

Laboratory Analysis

The team compared TRIzol-based (phenol-chloroform) extraction with column-based (Qiagen) kits. Detection was performed via RT-qPCR targeting the N1 and N2 regions of the SARS-CoV-2 N gene, following CDC-recommended protocols.

Figure 1: Workflow for collecting and processing environmental samples from public transit buses.

Key Results and Insights

The study demonstrated that HVAC filters effectively act as integrated samplers, maintaining viable viral RNA for up to a week and effectively "pooling" the respiratory signatures of riders.

Positivity Rates and Community Correlation

SARS-CoV-2 RNA was detected in 14% (5/37) of air filters and 42% (13/31) of handhold swabs, with an overall positivity rate of 24% across all samples. These results generally tracked with King County’s daily case counts; for instance, during a peak in late November 2020, all five sampled buses tested positive.

Figure 2: Summary of SARS-CoV-2 detection rates across different filter types and bus locations.

Technical Findings

A key technical insight was that the TRIzol extraction method outperformed standard column-based kits for air filters, likely because filter debris interfered with silica membranes. Conversely, swabs often contained "grime" from handrails that inhibited PCR reactions when using TRIzol.

Discussion and Future Directions

This research proves that passive sensing on urban transit infrastructure is a viable method for tracking pandemic spread. Unlike wastewater, bus routes allow for neighborhood-level surveillance, potentially identifying hotspots before clinical cases spike.

However, several limitations remain. The sample size was relatively small, and the process currently requires manual labor for filter placement and retrieval. Future implementation would benefit from integration into standard maintenance schedules. Additionally, the study detected viral RNA, which does not confirm infectivity. Future work aims to automate detection using miniaturized PCR devices for real-time data reporting directly from vehicles.

Summary updated

Abstract

Abstract Affordably tracking the transmission of respiratory infectious diseases in urban transport infrastructures can inform individuals about potential exposure to diseases and guide public policymakers to prepare timely responses based on geographical transmission in different areas in the city. Towards that end, we designed and tested a method to detect SARS-CoV-2 RNA in the air filters of public buses, revealing that air filters could be used as passive fabric sensors for the detection of viral presence. We placed and retrieved filters in the existing HVAC systems of public buses to test for the presence of trapped SARS-CoV-2 RNA using phenol-chloroform extraction and RT-qPCR. SARS-CoV-2 RNA was detected in 14% (5/37) of public bus filters tested in Seattle, Washington, from August 2020 to March 2021. These results indicate that this sensing system is feasible and that, if scaled, this method could provide a unique lens into the geographically relevant transmission of SARS-CoV-2 through public transit rider vectors, pooling samples of riders over time in a passive manner without installing any additional systems on transit vehicles. Synopsis Passive sensing of viral presence on urban transit infrastructure is proven, with forward-looking benefits for tracking pandemic spread.
BibTeX
@misc{hoffman2021passively,
  author = {Jason S. Hoffman and Matthew Hirano and Nuttada Panpradist and Joseph Breda and Parker S. Ruth and Yuanyi Xu and Jonathan Lester and Bichlien H. Nguyen and Luís Ceze and Shwetak Patel},
  title = {{Passively Sensing SARS-CoV-2 RNA in Public Transit Buses}},
  year = {2021},
  doi = {10.1101/2021.06.02.21258184},
  howpublished = {medRxiv},
}

Loading related content...

Figure