Passive directional sub-ambient daytime radiative cooling

Bikram Bhatia, Arny Leroy, Yichen Shen, Lin Zhao, Melissa Gianello, Duanhui Li, Tian Gu, Juejun Hu, Marin Soljačić, Evelyn N. WangNature Communications 2018 · DOI

Abstract: Demonstrations of passive daytime radiative cooling have primarily relied on complex and costly spectrally selective nanophotonic structures with high emissivity in the transparent atmospheric spectral window and high reflectivity in the solar spectrum. Here, we show a directional approach to passive radiative cooling that exploits the angular confinement of solar irradiation in the sky to achieve sub-ambient cooling during the day regardless of the emitter properties in the solar spectrum. We experimentally demonstrate this approach using a setup comprising a polished aluminum disk that reflects direct solar irradiation and a white infrared-transparent polyethylene convection cover that minimizes diffuse solar irradiation. Measurements performed around solar noon show a minimum temperature of 6 °C below ambient temperature and maximum cooling power of 45 W m⁻². Our passive cooling approach, realized using commonly available low-cost materials, could improve the performance of existing cooling systems and enable next-generation thermal management and refrigeration solutions.

The Challenge of Daytime Radiative Cooling

Passive radiative cooling is a natural phenomenon where an object sheds heat as infrared radiation directly into the cold vacuum of space. This occurs through the "atmospheric window," a range of wavelengths (8–13 µm) where the atmosphere is transparent. While this process is straightforward at night, achieving it under direct sunlight is a significant engineering challenge. The sun provides roughly 1000 W/m² of heating—nearly ten times the maximum cooling power an object can generate through radiation.

Spectral intensity of solar radiation (AM1.5) compared to the atmospheric transmission window.

Historically, the solution has been "spectral selectivity": engineering complex, multi-layered nanophotonic materials that act as perfect mirrors for visible light while remaining perfect emitters for infrared. However, these materials are expensive, difficult to manufacture at scale, and sensitive to environmental degradation. This study proposes a workaround: changing where the device looks in the sky, rather than just what it is made of.

Methods: Decoupling Heat with Directional Control

The core innovation presented in this paper is directional control. Because the sun is angularly confined—occupying only a tiny 0.5° sliver of the sky—the researchers realized they could decouple solar heating from radiative cooling. By blocking the direct "firehose" of energy from the sun with a simple shadow, the emitter only has to contend with much weaker diffuse solar radiation.

The experimental setup consisted of:

  • The Reflector: A polished aluminum disk mounted on a track, manually adjusted to stay between the sun and the emitter.
  • The Emitter: A copper disk coated with standard commercial paint (either white or black).
  • The Cover: Two layers of nanoporous polyethylene (PE). This material is transparent to outgoing infrared heat but reflects diffuse sunlight and acts as a convection shield to prevent ambient air from warming the device.

Experimental Results and Performance

By utilizing this directional approach, the researchers demonstrated that sub-ambient cooling is possible even with non-ideal materials. Even a "solar-black" emitter, which would normally become scorching hot in the sun, dropped below ambient temperature once the direct solar beam was blocked.

Schematic of the directional cooling setup (c) and measured cooling power for solar-white and solar-black emitters (d).

Key findings from measurements performed at MIT include:

  • Stagnation Temperature: Around solar noon, the "solar-white" emitter reached 6°C below ambient temperature, while the "solar-black" emitter reached 5.5°C below ambient.
  • Cooling Power: The system demonstrated a maximum cooling power of 45 W/m² for the white emitter and 30 W/m² for the black emitter.

Implications and Future Outlook

This research proves that daytime radiative cooling can be achieved using "grocery bag" grade plastics and hardware-store paint. By shifting the challenge from expensive material science to straightforward geometric control, this approach significantly improves the cost-to-performance ratio of passive cooling systems.

While the current prototype requires sun tracking, future work could involve static "shadow ring" designs or integration into concentrated photovoltaic systems. This directional method offers a promising path toward low-cost, sustainable refrigeration and thermal management solutions, particularly in off-grid rural areas.

Summary updated

Abstract

Demonstrations of passive daytime radiative cooling have primarily relied on complex and costly spectrally selective nanophotonic structures with high emissivity in the transparent atmospheric spectral window and high reflectivity in the solar spectrum. Here, we show a directional approach to passive radiative cooling that exploits the angular confinement of solar irradiation in the sky to achieve sub-ambient cooling during the day regardless of the emitter properties in the solar spectrum. We experimentally demonstrate this approach using a setup comprising a polished aluminum disk that reflects direct solar irradiation and a white infrared-transparent polyethylene convection cover that minimizes diffuse solar irradiation. Measurements performed around solar noon show a minimum temperature of 6 °C below ambient temperature and maximum cooling power of 45 W m<sup>-2</sup>. Our passive cooling approach, realized using commonly available low-cost materials, could improve the performance of existing cooling systems and enable next-generation thermal management and refrigeration solutions.
BibTeX
@inproceedings{bhatia2018passive,
  author = {Bikram Bhatia and Arny Leroy and Yichen Shen and Lin Zhao and Melissa Gianello and Duanhui Li and Tian Gu and Juejun Hu and Marin Soljačić and Evelyn N. Wang},
  title = {{Passive directional sub-ambient daytime radiative cooling}},
  booktitle = {Nature Communications},
  year = {2018},
  doi = {10.1038/s41467-018-07293-9},
}

Loading related content...

Figure