Abstract
Ultrathin flat meta-optics have shown great promise for holography in recent years. However, most of the reported meta-optical holograms rely on only phase modulation and neglect the amplitude information. Modulation of both amplitude and phase in meta-optics either requires polarization sensitive meta-atoms, or complex scatterers with stringent fabrication requirements. Additionally, almost all the meta-optical holograms were measured under laser illumination. Here we adopt the concept of double-phase holography, to report polarization-independent holography with both amplitude and phase modulation, using dielectric meta-optics. We validate the implementation of complex phase hologram by measuring an improvement of structural similarity of the reconstructed hologram by ~3x over phase-only holograms. Finally, we demonstrate that meta-optical holography can also be realized using partially incoherent light from a light emitting diode. This observation can significantly reduce the alignment complexity and speckles in laser-based meta-optical holography.
Introduction
Holography is often considered the ultimate goal for 3D displays and augmented reality (AR). However, current meta-optical implementations typically face a significant limitation: they primarily modulate only the phase of light, discarding amplitude information. This "phase-only" approach often results in poor signal-to-noise ratios and degraded image quality. While complex holography (modulating both phase and amplitude) exists, it usually necessitates complex fabrication of asymmetric meta-atoms or relies on specific polarization states. Furthermore, the reliance on coherent laser sources introduces "speckle"—interference patterns that reduce clarity—and increases system complexity. This research presents a method to achieve full complex modulation using simple, polarization-independent structures compatible with partially incoherent light sources like LEDs.
Methodology
The researchers implemented Double-Phase Holography (DPH) using dielectric meta-optics. The core innovation lies in the encoding strategy: any complex light field can be mathematically decomposed into the sum of two phase-only functions. By interleaving these two phase values in a "checkerboard" pattern across the metasurface, the device effectively modulates both phase and amplitude.
The hardware consists of an array of square silicon nitride ($Si_3N_4$) pillars on a quartz substrate. The square geometry ensures polarization independence, while the sub-wavelength pitch (350 nm) maintains light in the zero-th diffraction order. This high spatial density compensates for the resolution loss typically associated with the double-phase technique, where two physical pixels are used to represent one complex value.
Results and Discussion
The DPH approach was evaluated using the "W and Husky" test image and compared against traditional phase-only and Gerchberg-Saxton (GS) algorithms.
Key findings include:
- Quantitative Improvement: Under laser illumination (532 nm), the DPH method achieved a Structural Similarity Index Metric (SSIM) of 0.5855, a nearly 3x improvement over the phase-only version (SSIM = 0.2736).
- Speckle Reduction: Unlike the GS algorithm, which produces high contrast but significant speckle noise, the DPH method yielded a much smoother reconstruction.
- LED Compatibility: Crucially, the system performed robustly under partially incoherent light from an LED (20 nm bandwidth), maintaining an SSIM of 0.5496. This demonstrates that meta-optical holography does not strictly require expensive, hard-to-align laser sources.
Conclusion
By combining double-phase holography with dielectric meta-optics, this work achieves high-quality, polarization-independent complex modulation. The demonstration of LED-compatible holography is a significant step toward practical, speckle-free AR/VR displays. Future developments will focus on expanding this technique to full RGB color and integrating active materials for dynamic video holography.
Summary updated