Partial Discharge Wideband Full-Band High-Gain Resonant Cavity UHF Sensor Research

Chengqiang Liao, Lei Zhang, Guozhi Zhang, Changyue Lu, Xiaoxing ZhangSensors 2023 · DOI

TL;DR

This paper presents a novel wideband, full-band, high-gain resonant cavity UHF antenna sensor for detecting partial discharge (PD) in power equipment. By combining Fabry-Perot resonant cavity principles with optimized monopole antenna designs, the sensor achieves excellent performance across a broad frequency range, crucial for comprehensive PD analysis.

What Problem Does This Paper Address?

Partial discharge (PD) is a critical indicator of insulation degradation in power equipment, often leading to catastrophic failures. The Ultra-High Frequency (UHF) method is a sensitive and robust technique for detecting PD by analyzing the electromagnetic waves it emits. However, existing UHF sensors often struggle with limited bandwidth, insufficient gain, and inconsistent performance across different frequency bands. This variability hinders a thorough understanding of PD radiation characteristics and makes it difficult to pinpoint the exact nature and location of defects. The paper aims to address this by developing a UHF sensor that offers wideband coverage, high gain, and stable performance, enabling more comprehensive PD monitoring and analysis.

Methods

The researchers employed a multi-faceted approach to design and optimize their UHF antenna sensor:

  • Fabry-Perot Resonant Cavity Antenna Design: This core principle was used to enhance antenna gain. The concept involves creating a resonant cavity between a partially reflective surface and a fully reflective ground plane, allowing for constructive interference of electromagnetic waves to boost signal strength.
  • Monopole Patch Antenna Optimization:
    • Curved Flow Technology: This technique was used to modify the radiating patch of a standard monopole antenna. By introducing slots and stepped structures, the effective electrical length of the antenna is increased without altering its physical size, thereby broadening its operational bandwidth.
  • Slot Dual Resonance Structure: This method was implemented to further enhance antenna gain. By strategically placing slots and geometric structures on the antenna surface, the current distribution is concentrated, leading to increased gain.
  • Simulation and Prototyping: The High Frequency Structure Simulator (HFSS) was used for antenna design, optimization, and simulation. The designed antenna was then prototyped and its performance was experimentally validated using a vector network analyzer and a custom-built PD detection test platform.

Datasets

The paper does not explicitly mention the use of pre-existing datasets for training or evaluation. Instead, it relies on simulated data generated by HFSS and experimental data collected from their custom-built PD detection test platform. This platform was designed to simulate typical air gap discharge defects in GIS (Gas Insulated Switchgear) equipment.

Key Insights and Ideas

  • Fabry-Perot Cavity for Gain Enhancement: The paper demonstrates that the Fabry-Perot resonant cavity principle is highly effective in boosting antenna gain, which is crucial for detecting weak PD signals from a distance.
  • Curved Flow and Slot Structures for Bandwidth and Gain: The combination of curved flow technology and slot dual resonance structures proved instrumental in achieving both a wide operational bandwidth and improved gain for the monopole antenna. This addresses the limitations of traditional antennas that often sacrifice one for the other.
  • Wideband Performance is Key for PD Analysis: The authors emphasize that a wideband sensor is essential for capturing the full energy spectrum of PD radiation. This allows for a more comprehensive understanding of the PD characteristics, aiding in defect identification and localization.
  • Experimental Validation is Crucial: The paper highlights the importance of validating simulation results with real-world measurements, showing good agreement between simulated and measured VSWR and gain.

Key Results

  • VSWR Performance: The designed resonant cavity monopole antenna exhibits a VSWR ≤ 5 across a broad frequency range of 0.37 GHz to 3 GHz, meeting the engineering requirements for PD detection.
  • Gain Performance: The average gain across the 0.3 GHz–3 GHz band is 4.92 dBi. The maximum gain achieved is 7.16 dBi at the primary resonant frequency of 1.0 GHz.
  • Radiation Characteristics: The antenna demonstrates good radiation performance across the entire frequency spectrum, with directional patterns that are suitable for PD detection.
  • Comparative Performance: In experimental tests, the designed sensor showed higher sensitivity in detecting PD signals compared to a previously developed flexible monopole antenna. The measured signal amplitude was significantly higher, and the signal persisted for a longer duration before decaying to background noise.

Limitations and Future Work

  • VSWR Fluctuation: While the overall VSWR performance is good, the paper notes that the VSWR fluctuation becomes larger after the slot dual resonance optimization compared to the curved flow technique alone.
  • Cross-Polarization: At higher frequencies (e.g., 1.4 GHz), the gain direction plot shows fission and depression, which the authors attribute to potential cross-polarization issues arising from the complex current path.
  • Future Work: The paper suggests that the developed sensor provides a strong foundation for further research into understanding PD radiation characteristics and optimizing PD detection strategies for various power equipment. The high gain and wide bandwidth of this sensor enable more comprehensive analysis of PD signals, potentially leading to improved diagnostic capabilities.

Summary updated

Abstract

To meet the real demand for broadband full-band high-gain antenna sensors in the process of partial discharge (PD) Ultra-High frequency (UHF) detection test and online monitoring of power equipment, this paper builds a resonant cavity monopole UHF antenna sensor based on Fabry-Perot resonant cavity antenna technology, conducts the sensor Voltage Standing Wave Ratio (VSWR) optimization study using curved flow technology, conducts the sensor gain optimization study using slot dual resonant structure, and, finally, tests the sensor performance using the built PD detection test platform. The resonant cavity monopole antenna exhibits outstanding VSWR performance in the frequency range of 0.37 GHz-3 GHz, according to simulation and test data: the average gain in the frequency range of 0.3 GHz-3 GHz is 4.92 dBi, and the highest gain at the primary resonant frequency of 1.0 GHz is 7.16 dBi, with good radiation performance over the whole frequency spectrum. The electromagnetic pulse signal sensed by the UHF sensor developed in this paper can demonstrate the energy spectrum distribution characteristics of PD radiation electromagnetic wave signal more comprehensively, laying a firm technical foundation for thoroughly understanding the electromagnetic wave radiation characteristics of various types of PD insulation defects of various power equipment and the selection of a specific direction for its supporting optimization.
BibTeX
@inproceedings{liao2023partial,
  author = {Chengqiang Liao and Lei Zhang and Guozhi Zhang and Changyue Lu and Xiaoxing Zhang},
  title = {{Partial Discharge Wideband Full-Band High-Gain Resonant Cavity UHF Sensor Research}},
  booktitle = {Sensors},
  year = {2023},
  doi = {10.3390/s23156847},
}
Figure