Parameters Design for Logging Eccentering Machinery Based on MATLAB Optimization Program
Lists
Only you see this
Abstract
There will need a thrust to keep the sidewall contact force between the logging eccenter- ing machinery sensors and the sidewall as a fixed value,so to obtain the minimum of the thrust is an optimizing question during the structural design of the eccentering machinery.The dynamic model of multi-rods-logging eccentering machinery has been built,by using the principle of virtual displacement,and to deduce the function which uses the sliding rod thrust Fas the dependent var- iable,and uses the length the positional parameter of the rods and the sidewall contact force W as the variables.And then the model of nonlinear programming-optimal design has was built to obtain the geometry parameters of the rods based on the function built before.The matlab optimi- zation program is utilized to solve the optimal model.At last using the optimal result comparing with parameters which uses in practical production,the optimization of the dynamic parameters has been confirmed.
BibTeX
@inproceedings{cao2013parameters,
author = {Xu Cao},
title = {{Parameters Design for Logging Eccentering Machinery Based on MATLAB Optimization Program}},
booktitle = {Oil},
year = {2013},
}Loading related content...