PARAMETER ESTIMATION AND MOTION TRACKING OF PACK ICE FROM FY-3/MERSI IMAGES

Yang Zhou, Juan Du, Yan Zhang, Cailan Gong, Yuxin Hu2020 · DOI

Abstract

This paper presents a method to estimate shape parameters and track the motion velocity of pack ice using FY-3/MERSI satellite imagery. Focusing on the Fram Strait, the study employs sea ice recognition, pack ice extraction, and parameter estimation to generate high-resolution motion vectors. Results indicate that pack ice concentration decreases faster than overall sea ice concentration, while geometric properties like roundness and convexity remain stable across sizes. The method successfully tracked over 80% of pack ice floes, matching well with NSIDC grid data while providing superior detail.

Introduction: The Challenge of Arctic Ice Tracking

Monitoring Arctic sea ice is critical for climate modeling and maritime navigation. Traditionally, ice motion is tracked using microwave radiometers, which offer all-weather capability but low spatial resolution (several kilometers per pixel). This typically results in "grid-to-grid" motion vectors that average velocity over large areas.

However, regions like the Fram Strait—the primary exit for Arctic ice—are characterized by rapid fragmentation and deformation. Traditional methods like Maximum Cross-Correlation (MCC) struggle to capture the rotation and individual movement of smaller ice floes. This research addresses the need for an object-based approach using high-resolution (250m) optical data to estimate specific shape parameters and individual velocities of pack ice floes.

Methodology

The proposed pipeline consists of four primary stages:

  1. Sea Ice Recognition: Using the Medium Resolution Spectral Imager (MERSI) on Fengyun-3 (FY-3) satellites, the Normalized Difference Snow Index (NDSI) and specific spectral bands filter out clouds and open seawater.
  2. Pack Ice Extraction: To separate distinct "pack ice" from "trash ice" (small fragments), gradient operators are applied with OTSU adaptive thresholding to highlight solid floe edges.
  3. Parameter Estimation: Six shape parameters are calculated for each floe: area, perimeter, mean clamp diameter, roundness, convexity, and width-height ratio.
  4. Motion Tracking: A two-step matching process identifies the same floe in subsequent images. Candidates are first filtered by area, then the best match is determined using "Euclid closeness," a measure of shape parameter similarity.
Classification of pack ice vs. trash ice.

Data and Study Area

The study utilizes data from the Medium Resolution Spectral Imager (MERSI) onboard the Chinese FY-3A/B/C satellites from June to August 2014.

  • Spatial Resolution: 250m per pixel.
  • Study Area: The Fram Strait (77°N to 81°N, 10°W to 10°E).
  • Validation: Results were compared against National Snow and Ice Data Centre (NSIDC) polar daily grid sea ice motion vectors.
The Fram Strait study area.

Results and Discussion

Geometric Self-Similarity and Melting Patterns

A key finding is that "pack ice concentration" decreases significantly faster than "sea ice concentration." This suggests that summer melting causes ice to fragment into untrackable "trash ice" rather than just disappearing. Interestingly, while the perimeter and mean clamp diameter are highly sensitive to edge melting, parameters like roundness, convexity, and width-height ratio remain stable. This geometric self-similarity allows the object-based tracking to remain effective even as floes shrink.

Tracking Performance

The method successfully tracked more than 80% of the pack ice in the study region. The resulting motion vectors matched NSIDC daily grid products but provided significantly higher detail. While NSIDC provides a 25km grid, this method captures the actual motion of individual floes. Observed patterns showed ice flowing from north to southwest, driven by the Transpolar Drift Stream, with occasional cyclonic motion due to atmospheric turbulence.

Conclusion

The object-based tracking method using FY-3/MERSI imagery provides a detailed view of pack ice dynamics in the Arctic. While limited by cloud cover inherent to optical sensors, the approach offers superior resolution for understanding floe-level movement. Future work could involve fusing this high-resolution optical tracking with microwave data to create a robust, all-weather system that maintains individual floe dynamics.

Summary updated

Abstract

A method to estimate the shape parameters and track the motion velocity of pack ice is presented. The method consists of sea ice recognition, pack ice extraction, parameters estimation and motion tracking. We try to estimate the shape parameters and track the motion velocity from FY-3/MERSI images of Fram strait, which were covered by cloud less than 30%. It found that the pack ice concentration significantly decreases faster than sea ice concentration. The two parameters indicate the distribution difference between sea ices and pack ices. The change of the perimeter and mean clamp diameter are obvious owing to they were sensitive to the edge of the pack ices. But the small change of roundness, convexity and width-height ratio indicate the shape similarity of pack ices in various size. More than 80% of the pack ices in the study region are tracked successfully by the proposed method. The resulting motion vectors in the overlapping zones are found to match well with the polar daily grid sea ice motion vectors provided by the National Snow and Ice Data Centre. The method can provide the actual motion vector of pack ices to improve the distribution and details of the grid-to-grid motion vectors.
BibTeX
@inproceedings{zhou2020parameter,
  author = {Yang Zhou and Juan Du and Yan Zhang and Cailan Gong and Yuxin Hu},
  title = {{PARAMETER ESTIMATION AND MOTION TRACKING OF PACK ICE FROM FY-3/MERSI IMAGES}},
  booktitle = {˜The},
  year = {2020},
  doi = {10.5194/isprs-archives-xliii-b3-2020-925-2020},
}
Figure