Abstract
This paper proposes a parallel-connected inverter control method for material micromachining. The proposed control method is composed of a sigmoid sliding mode function (SSMF) and a firefly algorithm (FA). The SSMF is insensitive to system uncertainties, thus achieving high-quality AC output voltage. However, as the load of the micromachining (MM) is a step change situation, steady-state errors still exist in SSMF. The steady-state errors cause heat losses in transistors and high voltage harmonics in inverter output, and thus the stability and reliability of the MM are degraded. To attenuate steady-state errors, the control gains of the SSMF can be tuned via the FA. Using the proposed control method, the parallel-connected inverter yields a high-quality AC output voltage with low voltage harmonics and fast dynamic response. Experiments prove the applicability of the proposed control method in material MM.
Introduction
In material micromachining (MM)—encompassing high-precision drilling, cutting, and engraving—the quality of the AC output voltage from power inverters is paramount. Parallel-connected inverters are increasingly favored in these applications due to their superior thermal management, redundancy, and modularity. However, controlling these parallel modules presents significant challenges, particularly during the transient "step changes" in load that occur when a machining tool engages with a material. Traditional control methods often struggle with system uncertainties or hardware dependencies, leading to voltage harmonics and heat loss that can compromise the precision of the micromachining process.
Proposed Control Strategy
To address these limitations, this research introduces a hybrid control approach combining a Sigmoid Sliding Mode Function (SSMF) with the Firefly Algorithm (FA).
Sigmoid Sliding Mode Function (SSMF)
Standard Sliding Mode Control (SMC) typically utilizes a "sign" function for switching, which often results in "chattering"—rapid, high-frequency oscillations that stress hardware. By replacing the sign function with a sigmoid function, the controller achieves a smoother transition. This modification significantly reduces high-frequency noise and thermal stress on the inverter transistors, leading to a cleaner AC output.
Firefly Algorithm (FA) Optimization
While SSMF improves smoothness, steady-state errors can still persist during abrupt load variations. The Firefly Algorithm, a meta-heuristic optimization technique inspired by the bioluminescent communication of fireflies, is employed to dynamically tune the control gains of the SSMF. In this optimization model, control parameters are adjusted in real-time to minimize tracking errors, ensuring the system remains stable even under unpredictable load conditions.
Experimental Results
The proposed method was validated using a physical experimental setup with three inverter modules connected in parallel. The system was tested under a DC voltage of 210V to produce a 110Vrms output at 60 Hz.
Key findings from the experimental data include:
- Transient Stability: The controller demonstrated a rapid response to step load changes, with tracking errors converging to zero almost instantaneously.
- Voltage Quality: The output voltage maintained a clean sinusoidal waveshape with minimal sag during load application. As shown in the experimental waveforms, the distortion remains negligible even during transient events.
- Reliability: The hybrid controller ensured equal current distribution across all parallel modules, preventing overstress on individual components and enhancing the overall system lifespan.
Conclusion
The combination of SSMF and FA provides a robust solution for the demanding power requirements of material micromachining. By eliminating chattering and automating gain tuning, the proposed method achieves high-precision tracking and superior voltage quality. This approach is easier to implement than many traditional high-performance controllers and offers significant benefits for designers of precision manufacturing equipment.
Summary updated