Overcoming Pedestrian Blockage in mm-Wave Bands using Ground Reflections

P. R. Kumar, Santosh Ganji, Romil Sonigra, P. R. Kumar 0001arXiv 2021 · arXiv

Abstract

Millimeter-wave (mm-Wave) frequencies are essential for high-speed 5G/6G networks but suffer from extreme sensitivity to physical blockages. A single pedestrian can interrupt the direct Line-of-Sight (LoS) path, causing significant re-acquisition delays. This paper explores the use of ground reflections as a robust backup link. By leveraging the geometric consistency of ground reflections and their relatively low attenuation (4-6 dB), we propose an efficient in-band protocol to maintain synchronization during blockages. Experimental results show that our method requires only three measurements to find a backup beam, avoiding the ~1.28-second delay of standard 5G re-entry procedures.

Introduction

Millimeter-wave (mm-Wave) bands (28–80 GHz) provide the bandwidth necessary for next-generation mobile applications. However, these signals propagate in narrow, directional beams that are easily obstructed by human bodies. When a pedestrian blocks the LoS path, the signal drop is often severe enough to disconnect the user, necessitating a time-consuming initial access procedure to re-establish the link.

Geometry of Line-of-Sight (LoS) and ground-reflected signal paths.

Traditional solutions involve increasing base station density to facilitate rapid handovers. However, this approach is costly. This research investigates an alternative: using the environment's natural reflective properties—specifically the ground—to bypass blockages.

Methods and Protocol Design

The researchers conducted measurement campaigns using 60 GHz software-defined radio (SDR) transceivers with 12-element phased arrays. A key observation is that ground reflections typically share the same azimuth (horizontal angle) as the LoS path, differing primarily in elevation (vertical angle). This simplifies the search space for a backup signal.

We propose a state-machine-based protocol to manage this transition:

  1. Normal Operation (N.Op): The system uses the primary LoS path.
  2. Ground Reflection Discovery (GRD): Upon detecting or predicting a blockage, the device scans three neighboring vertical beams.
  3. Reflected Beam Operation (RBO): The system switches to the ground-reflected path to maintain the link.
State machine for the proposed ground reflection discovery and operation protocol.

Experimental Results

Experiments were performed on concrete tiles, smooth concrete, and gravel. The "4dB Surprise" was a major finding: ground reflections on these surfaces were only 4–6 dB weaker than the direct LoS path, which is significantly stronger than typical wall reflections (often >10 dB loss).

The proposed protocol is highly efficient, requiring only 3 measurements compared to the ~25 measurements needed by existing state-of-the-art methods like "Unblock" or "BeamSpy." By maintaining time synchronization through the ground reflection, the system avoids the 1.28-second latency of the 5G New Radio initial access procedure, ensuring seamless connectivity for latency-sensitive applications like VR.

Conclusion

Ground reflections provide a viable and efficient secondary path for mm-Wave communications in the presence of pedestrian blockage. By exploiting the geometric relationship between LoS and reflected paths, mobile devices can maintain connectivity with minimal overhead. Future work will address the impact of diverse surfaces (e.g., wet pavement) and high-mobility scenarios.

Summary updated

BibTeX
@misc{kumar2021overcoming,
  author = {P. R. Kumar and Santosh Ganji and Romil Sonigra and P. R. Kumar},
  title = {{Overcoming Pedestrian Blockage in mm-Wave Bands using Ground Reflections}},
  year = {2021},
  eprint = {2110.13884},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2110.13884},
}
Figure