Overall Water Splitting Performance of Nitrogen-Doped Graphene Oxide-Supported Fe-Co-Ni Single-Atom Catalysts

Heng Yang, Chuang Zhu, Yongwei Zhang, Manting GuCatalysts 2025 · DOI

TL;DR

Researchers have developed a novel single-atom catalyst (SAC) composed of iron, cobalt, and nickel (Fe-Co-Ni) supported on nitrogen-doped graphene oxide. This catalyst exhibits exceptional performance and stability for overall water splitting in alkaline conditions, achieving low overpotentials for both hydrogen and oxygen evolution reactions and a competitive cell voltage for hydrogen production.

What Problem Does This Paper Address?

The global demand for clean energy is driving the search for efficient and sustainable methods to produce hydrogen, a key energy carrier. Electrocatalytic water splitting is a promising technology for this purpose, but it requires significant energy input due to high kinetic barriers in both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Current state-of-the-art catalysts, often based on precious metals like platinum and iridium, are expensive and scarce, limiting their widespread adoption. While single-atom catalysts (SACs) offer high atom utilization and unique catalytic properties, preventing the aggregation of metal atoms and optimizing their electronic structure for synergistic catalysis remain significant challenges. This paper addresses the need for cost-effective, highly active, and stable bifunctional electrocatalysts for overall water splitting by designing and characterizing a ternary Fe-Co-Ni SAC on a nitrogen-doped graphene oxide support.

Methods

The researchers synthesized the Fe-Co-Ni single-atom catalyst (FeCoNi/CNG) using an impregnation-negative pressure pyrolysis method. This involved mixing graphene oxide with melamine, followed by nitridation and then impregnation with a solution of iron, cobalt, and nickel nitrates, and finally pyrolysis.

Key characterization techniques employed include:

  • X-ray Diffraction (XRD): To analyze the crystalline structure of the synthesized materials.
  • Scanning Electron Microscopy (SEM) and Energy-Dispersive X-ray Spectroscopy (EDS): To observe the morphology and elemental distribution.
  • High-Angle Annular Dark-Field Scanning Transmission Electron Microscopy (HAADF-STEM): For atomic-resolution imaging to confirm the dispersion of single metal atoms.
  • X-ray Photoelectron Spectroscopy (XPS): To investigate the elemental composition, oxidation states, and electronic structure of the catalyst, particularly the metal-nitrogen interactions.
  • Fourier Transform Infrared Spectroscopy (FT-IR) and Raman Spectroscopy: To analyze surface functional groups and structural defects.
  • Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES): To quantify the metal loading.
  • Electrochemical Measurements:
    • Linear Sweep Voltammetry (LSV): To evaluate the catalytic activity for HER and OER by measuring current density as a function of applied potential.
  • Tafel Plots: Derived from LSV data to understand the reaction kinetics and identify the rate-determining step.
  • Electrochemical Impedance Spectroscopy (EIS): To assess electron transfer kinetics and charge transfer resistance.
  • Cyclic Voltammetry (CV) and Chronopotentiometry (CP): To evaluate the long-term stability of the catalyst.
  • In situ Raman Spectroscopy: To monitor reaction intermediates during OER and HER under operating conditions.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Synergistic Metal-Metal and Metal-Support Interactions: The combination of Fe, Co, and Ni atoms, along with their strong coordination with nitrogen atoms in the graphene oxide support, creates a unique electronic environment. This synergy is crucial for optimizing the adsorption/desorption of reaction intermediates.
  • Nitrogen Doping is Key: The nitrogen doping in the graphene oxide support plays a critical role in anchoring the single metal atoms, preventing their aggregation, and enhancing the catalyst's electrical conductivity. The specific types of nitrogen configurations (pyridinic, pyrrolic, graphitic) were found to be important, with the Cat-500 sample showing an optimal balance.
  • Modulation of D-band Electronic States: The interactions between the metal atoms and the support effectively tune the d-band electronic states of the metal centers. This modulation weakens the adsorption of hydrogen and oxygen intermediates, leading to faster reaction kinetics.
  • Atomic Dispersion Achieved: HAADF-STEM imaging provided direct visual evidence of atomically dispersed Fe, Co, and Ni atoms, confirming the success of the synthesis strategy in preventing nanoparticle formation.
  • Bifunctional Performance: The catalyst demonstrates excellent performance for both HER and OER in alkaline media, making it a true bifunctional catalyst for overall water splitting.

Key Results

  • High Metal Loading: The optimized catalyst (Cat-500) achieved a high total metal loading of 6.78 wt%.
  • Low Overpotentials:
    • HER: 77 mV at 10 mA cm⁻² in 1.0 M KOH.
  • OER: 355 mV at 10 mA cm⁻² in 1.0 M KOH.
  • Overall Water Splitting: In a two-electrode setup, the FeCoNi/CNG catalyst achieved a cell voltage of 1.68 V at 10 mA cm⁻².
  • Excellent Stability: The catalyst showed negligible degradation in performance after 1000 CV cycles for HER and 50 hours of CP testing for OER. XPS analysis before and after stability tests confirmed the stable chemical states of the metal ions.
  • Optimized Synthesis: The Cat-500 sample, synthesized at a pyrolysis temperature of 500 °C, exhibited the best performance, attributed to a favorable balance of nitrogen doping and defect concentration.

Limitations and Future Work

  • Alkaline Medium Focus: The study primarily focuses on performance in alkaline electrolyte. While this is common for OER, exploring performance in acidic or neutral media could broaden its applicability.
  • Mechanism Elucidation: While in situ Raman spectroscopy provided insights into intermediate formation, a more comprehensive mechanistic study, potentially involving theoretical calculations for all reaction steps, could further refine our understanding.
  • Scalability: The paper demonstrates excellent performance at the lab scale. Future work could focus on scaling up the synthesis process for practical applications.
  • Long-Term Durability: While impressive, even longer-term durability tests under more industrially relevant conditions (e.g., higher current densities, presence of impurities) would be beneficial.

Summary updated

Abstract

Single-atom catalysts are highly efficient electrocatalysts for water splitting with exceptional atomic utilization, but atomic aggregation can impair their catalytic performance. To address this challenge, a Fe-Co-Ni single-atom bifunctional catalyst supported on nitrogen-doped graphene oxide was designed and employed for overall water splitting in alkaline electrolyte. The catalyst’s composition, structure, and morphology were systematically characterized using XRD, XPS, SEM, and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Electrochemical evaluations were performed to assess its activity and stability toward both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The results demonstrate that strong metal-nonmetal interactions between the Fe, Co and Ni single atoms and the nitrogen-doped graphene oxide support facilitate stable and uniform anchoring of the metal centers on the wrinkled carbon framework. The total metal loading reaches approximately 6.78 wt%, ensuring a high density of accessible active sites. Furthermore, synergistic electronic coupling among the Fe, Co, and Ni centers enhances charge transfer kinetics and modulates the D-band electronic states of the metal atoms. This effect weakens the adsorption strength of hydrogen and oxygen-containing intermediates, thus promoting faster reaction kinetics for both HER and OER. Consequently, the FeCoNi/CNG catalyst delivers low overpotentials of 77 mV for HER and 355 mV for OER at a current density of 10 mA cm−2 in alkaline conditions. When integrated into an alkaline water electrolyzer, the system achieves a cell voltage of only 1.68 V to attain a current density of 10 mA cm−2, underscoring its outstanding bifunctional catalytic performance.
BibTeX
@inproceedings{yang2025overall,
  author = {Heng Yang and Chuang Zhu and Yongwei Zhang and Manting Gu},
  title = {{Overall Water Splitting Performance of Nitrogen-Doped Graphene Oxide-Supported Fe-Co-Ni Single-Atom Catalysts}},
  booktitle = {Catalysts},
  year = {2025},
  doi = {10.3390/catal15121108},
}
Figure