Over-the-Air Phase Calibration of Spaceborne Phased Array for LEO Satellite Communications

Wei Zhang, Ding Chen, Bin ZhouIEEE Wireless Communications Letters 2026 · DOI

TL;DR

This paper tackles the critical challenge of calibrating spaceborne phased arrays (SPAs) for Low Earth Orbit (LEO) satellite communications, which suffer from unpredictable phase deviations due to the harsh space environment. The authors propose a novel over-the-air (OTA) calibration method that jointly estimates these phase deviations and the channel state information (CSI), while also optimizing the antenna beam patterns for improved accuracy.

What Problem Does This Paper Address?

LEO satellite constellations, like Starlink, are revolutionizing global communication. A key component of these systems is the spaceborne phased array (SPA), which offers rapid beam steering and multi-beam capabilities. However, SPAs are susceptible to phase deviations caused by factors like aging and radiation damage in space. These deviations degrade communication performance. Traditional calibration methods often rely on controlled, noise-free environments like anechoic chambers, which are not representative of the actual space environment. While some in-orbit calibration methods exist, they often only address temperature-induced drifts or are limited to specific antenna configurations. This paper addresses the need for an effective OTA calibration technique that can handle the complex electromagnetic environment of space and is applicable to large-scale SPAs, specifically by jointly estimating phase deviations and channel state information.

Methods

The core of the proposed solution is a block coordinate descent algorithm designed to iteratively refine estimates of the SPA's phase deviations and the communication channel.

Here's a breakdown of the key techniques:

  • Joint Estimation of Phase Deviations and CSI: The algorithm simultaneously estimates the unknown phase deviations ($\Omega$) and the channel state information (H) using multiple pilot transmissions. This is a departure from methods that might estimate them separately.
  • Over-the-Air (OTA) Calibration: The calibration is performed "over-the-air," meaning it uses the actual radio channel between the satellite and the ground terminal, mimicking real-world operating conditions.
  • Block Coordinate Descent: This optimization strategy breaks down the complex problem into smaller, manageable sub-problems. It iteratively optimizes one set of variables (e.g., channel H) while keeping others fixed (e.g., phase deviations $\Omega$), and then vice-versa, until convergence.
  • 4D-FFT for Coarse Estimation: To efficiently find initial estimates for the spatial angles (related to the channel), the paper employs a 4D-Fast Fourier Transform (FFT) approach. This helps to quickly identify approximate beam directions.
  • Backtracking Line Search for Refinement: After obtaining coarse estimates, a backtracking line search algorithm is used to refine the spatial angle estimates for higher accuracy.
  • Riemannian Conjugate Gradient (RCG) for Phase Estimation: For estimating the phase deviations, which are constrained to be unit-phase shifts (i.e., their magnitude is 1), the paper leverages the RCG algorithm. This is suitable for optimization on manifold spaces.
  • Beam Pattern Optimization: A significant contribution is the optimization of the SPA's beam patterns themselves. The paper proposes an algorithm to design these patterns to minimize the root mean squared error (RMSE) of the phase estimation, thereby improving calibration accuracy. This is achieved by formulating an optimization problem that seeks beam patterns that are most informative for phase calibration.

Datasets

Not discussed in the paper. The evaluation is based on simulated data.

Key Insights and Ideas

  • The Space Environment Demands OTA Calibration: The paper strongly emphasizes that traditional anechoic chamber calibration is insufficient for space-based systems due to the unpredictable nature of the space environment. OTA calibration is essential.
  • Joint Estimation is Key: Estimating phase deviations and channel state information simultaneously leads to more robust and accurate calibration compared to sequential approaches.
  • Beam Patterns Matter for Calibration: The choice of beam patterns used for pilot transmission significantly impacts the accuracy of phase calibration. Optimizing these patterns can yield substantial performance gains.
  • CRB as a Performance Benchmark: Deriving the Cramér Rao Bound (CRB) provides a theoretical lower bound on the achievable estimation error, allowing for a clear assessment of how well the proposed algorithm performs.

Key Results

  • RMSE Approaching CRB: The proposed OTA phase calibration algorithm achieves RMSEs for phase estimates that closely approach the theoretical Cramér Rao Bounds, indicating high accuracy.
  • Significant SNR Gain from Beam Optimization: Optimizing the beam patterns for calibration offers a substantial improvement, providing more than 4dB gain in SNR compared to using randomly generated beam patterns. This highlights the practical importance of this optimization.
  • Algorithm Convergence: The block coordinate descent algorithm demonstrates efficient convergence, typically within 10 iterations, even under challenging SNR conditions.
  • Robustness to Imperfect CSI: The paper shows that while imperfect channel state information (CSI) and phase deviations do affect performance, the optimized beam patterns still offer a noticeable improvement over random patterns, demonstrating resilience.

Limitations and Future Work

  • Phase Ambiguity: The paper acknowledges and addresses phase ambiguity between the estimated channel and phase deviations. This is handled by pre-assigning specific values to certain variables.
  • Computational Complexity: While the algorithm is shown to be efficient, the paper notes that the computational complexity can be approximated as $O(M^3)$ under certain conditions, where $M$ is related to the number of antennas. For very large arrays, this could still be a consideration.
  • Future Work: The paper implicitly suggests that further research could explore more advanced optimization techniques or adaptive beam pattern design strategies for even greater calibration efficiency and accuracy in dynamic LEO satellite environments. The impact of different types of hardware impairments beyond phase deviations could also be a future research direction.

Summary updated

BibTeX
@article{zhang2026over,
  author = {Wei Zhang and Ding Chen and Bin Zhou},
  title = {{Over-the-Air Phase Calibration of Spaceborne Phased Array for LEO Satellite Communications}},
  journal = {IEEE Wireless Communications Letters},
  year = {2026},
  doi = {10.1109/lwc.2025.3616976},
}
Figure