Abstract
Traditional Simultaneous Localization and Mapping (SLAM) systems typically operate without prior environmental knowledge, building maps from scratch. This paper introduces OSM-SLAM, a framework that integrates 2D building footprints from OpenStreetMap (OSM) as spatial priors for LiDAR-based SLAM. By aligning real-time 3D sensor data with global map data, the system improves localization accuracy, enables map correction, and provides a mechanism for re-localization after sensor failure. Evaluations on the KITTI dataset demonstrate significant reductions in trajectory error and enhanced robustness in urban environments.
Introduction
Most state-of-the-art SLAM systems follow a "tabula rasa" approach, relying solely on onboard sensors to navigate unknown environments. While effective, this ignores the vast amount of existing global spatial data. Furthermore, traditional SLAM struggles with re-localization when sensors fail or tracking is lost. OSM-SLAM addresses these issues by leveraging freely available OSM data as a "global anchor," allowing the robot to utilize prior knowledge while remaining robust to inaccuracies in the public map.
Methods
OSM-SLAM is built upon the ART-SLAM framework, a modular LiDAR-based Graph SLAM system. The architecture integrates a dual-branch pipeline to merge 3D LiDAR data with 2D map priors.
Pipeline Overview
The system processes data through two primary branches:
- Point Cloud Processing: Vertical planes (walls) are extracted from 3D LiDAR scans using a modified RANSAC algorithm and projected onto a 2D plane.
- OSM Data Integration: Building footprints are queried via the Overpass API based on the robot's estimated position and converted into a 2D point cloud.
Optimization Strategies
Data association is performed using Iterative Closest Point (ICP) to align detected walls with OSM footprints. These matches form constraints in a pose graph optimized via the g2o framework. The authors propose three strategies:
- Prior SLAM: Treats OSM buildings as fixed references.
- Rigid SLAM: Allows buildings to move as a single block to fit sensor data.
- Non-rigid SLAM: Treats buildings as independent entities, allowing the robot to correct displacements in the OSM map.
Results
The system was evaluated using the KITTI Odometry Dataset (Sequences 00 and 07). In scenarios where standard loop closure was disabled, Prior SLAM reduced the Mean Absolute Trajectory Error (ATE) on Sequence 07 from 1.537m to 1.166m. The system also demonstrated superior stability and successful re-localization after intentional tracking losses of 100 frames, a scenario where baseline systems typically fail. Qualitatively, the Non-rigid SLAM approach successfully "nudged" OSM footprints to match real-world observations, effectively refining the public map.
Conclusion
OSM-SLAM demonstrates the value of integrating global map priors into local SLAM pipelines. While the current implementation faces computational bottlenecks in plane extraction and depends on building-rich environments, it provides a robust foundation for "map-aware" robotics. Future work will explore deep learning for segmentation and the inclusion of additional OSM features like road networks and poles.
Summary updated