Origin of unexpected weak Gilbert damping in the LSMO/Pt bilayer system

Pritam Das, Pushpendra Gupta, Seung‐Cheol Lee, Subhankar Bedanta, Satadeep BhattacharjeeJournal of Physics D Applied Physics 2025 · DOI

TL;DR

This paper investigates the surprising observation that a pure La$_{0.7}$Sr$_{0.3}$MnO$_{3}$ (LSMO) film exhibits higher Gilbert damping than an LSMO/Platinum (Pt) bilayer. Using first-principles calculations, the researchers reconcile this anomaly by demonstrating that the intrinsic damping of LSMO is low, and its high experimental damping is due to a strong self-induced inverse spin Hall effect (ISHE). The presence of Pt in the bilayer, however, enhances charge conductivity and reduces the ISHE, leading to lower overall damping.

What Problem Does This Paper Address?

The field of spintronics relies heavily on controlling the magnetization dynamics of ferromagnetic materials. Gilbert damping is a crucial parameter that dictates how quickly magnetization dynamics decay. High damping generally leads to faster switching but also requires higher currents. Conversely, low damping is desirable for energy-efficient devices and high-frequency applications.

A common way to influence damping is through heterostructures, where a ferromagnetic (FM) layer is placed next to a non-magnetic heavy metal (HM) layer. This typically leads to enhanced damping due to spin pumping from the FM to the HM, where the spin current is dissipated. However, in some cases, an "anti-damping" effect is observed, where the damping is reduced. This paper tackles a particularly puzzling observation: a pure LSMO film showed higher damping than an LSMO/Pt bilayer, which contradicts the usual expectation that adding a heavy metal like Pt would increase damping. The authors aim to explain this unexpected behavior and understand the underlying microscopic mechanisms.

Methods

The study employs a combination of theoretical approaches:

  • First-Principles Density Functional Theory (DFT) Calculations: This is the core computational method. DFT was used to calculate the electronic structure, spin-dependent properties, and transport characteristics (longitudinal conductivity, spin Hall conductivity) of individual LSMO films and LSMO/Pt heterostructures. The calculations were performed using the Vienna ab initio Simulation Package (VASP) with the Perdew-Burke-Ernzerhof (PBE) functional and spin-orbit coupling (SOC) terms.
  • Wannier Interpolation: To obtain detailed band structures and transport properties, the DFT results were interpolated using the Wannier90 package. This allows for a more accurate representation of the electronic states and their contributions to transport.
  • Semiclassical Analysis: To interpret the DFT results and connect them to experimental observations, semiclassical models were used. This includes:
  • Kambersky's Torque-Correlation Model: Used to calculate the intrinsic Gilbert damping.
  • Valet-Fert Model: Applied to analyze layer-resolved spin accumulation in the Pt layer and determine the spin-diffusion length.
  • Haney et al.'s Semiclassical Model: Used to calculate the damping-like torque coefficient and understand the spin-orbit torque (SOT) contributions.

The researchers also performed a comparative study with a Co/Pt bilayer to highlight the unique behavior of the LSMO/Pt system.

Datasets

Not discussed in the paper. The study relies on ab initio calculations and established theoretical models, rather than experimental datasets for training or evaluation.

Key Insights and Ideas

  • Self-Induced ISHE in LSMO is the Key: The paper strongly suggests that the high damping in pure LSMO is not due to intrinsic material properties but rather an extrinsic effect arising from a "self-induced" inverse spin Hall effect (ISHE). This means LSMO itself can efficiently convert its own spin currents into charge currents, leading to significant damping.
  • Pt's Role: Diluting the ISHE: In the LSMO/Pt bilayer, the addition of Pt significantly increases the longitudinal charge conductivity. This "shunts" the charge current, effectively reducing the efficiency of the ISHE and thus lowering the overall damping.
  • Distinct Length Scales Matter: The paper emphasizes the importance of different length scales in spin pumping. In a single LSMO film, spin pumping is normalized over a short absorption depth, while in a bilayer, it's over the entire magnetic thickness. This difference plays a crucial role in how damping is affected.
  • Engineering Damping: The findings offer a practical strategy for controlling damping in spintronic devices. By tuning the ratio of spin Hall conductivity to longitudinal conductivity and the spin-diffusion length, researchers can engineer heterostructures with minimized magnetic losses for applications in spin-orbitronics.
  • Co/Pt vs. LSMO/Pt: The comparative study with Co/Pt shows that the observed behavior in LSMO/Pt is not universal. In Co/Pt, adding Pt generally increases damping, consistent with conventional spin-pumping expectations, highlighting the unique electronic and spin properties of LSMO.

Key Results

  • Intrinsic Damping: The calculated intrinsic Gilbert damping for LSMO is very low ($\approx 1.4 \times 10^{-3}$), supporting an extrinsic origin for the experimentally observed high damping.
  • Spin Hall Angle: The spin Hall angle ($|\theta_{SH}|$) for pure LSMO is found to be large ($\approx 0.093$), while for the LSMO/Pt bilayer, it is significantly reduced ($\approx 0.007$).
  • Conductivity Contrast: The longitudinal conductivity ($\sigma_{xx}$) of LSMO is much lower than that of the LSMO/Pt bilayer, which is attributed to the additional charge transport pathways introduced by Pt.
  • Spin-Diffusion Length in Pt: The Valet-Fert analysis yielded a spin-diffusion length in Pt ($A_{sf,Pt}$) of approximately 0.7975 nm for the ultrathin Pt layer studied.
  • Antidamping Torque: The calculated antidamping torque coefficient for the ultrathin LSMO/Pt heterostructure was estimated to be around 0.002.
  • Table I Summary: The paper presents a table summarizing calculated contributions to damping (intrinsic, spin-pumping, antidamping) and comparing them with experimental values, showing qualitative agreement in trends. For LSMO/Pt, the calculated total damping is 0.0134, compared to an experimental value of 0.0046.

Limitations and Future Work

  • Computational Constraints: The study acknowledges that direct first-principles treatment of experimentally relevant thick Pt layers (3 nm) is computationally prohibitive. They used thinner 4-monolayer Pt films (0.8 nm) and relied on fitting models to extrapolate.
  • Model Approximations: While the hyperbolic cosine model for spin polarization was used for the ultrathin Pt slab, the paper notes that the condition $t_{Pt} \gg A_{sf,Pt}$ was not met, suggesting potential limitations in the exponential approximation.
  • Experimental Parameter Transferability: The authors mention that while their theoretical approach is physically motivated, accurate transferability of parameters (like rf magnetic field) from theory to experimental conditions can be challenging.
  • Future Work: The paper suggests future studies could investigate the impact of varying Pt layer thickness, introducing different heavy metals with varying spin-orbit coupling strengths, and applying external fields to modulate spin dynamics. Understanding the role of temperature and external stress on damping parameters is also highlighted as a future direction.

Summary updated

Abstract

Abstract This study presents a first-principles and semiclassical analysis of the puzzling observation that a La 0.7 Sr 0.3 MnO 3 (LSMO) thin film exhibits larger Gilbert damping than an LSMO/Pt bilayer, contrary to conventional spin-pumping expectations. Density-functional theory with Wannier interpolation yields an intrinsic damping of <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" overflow="scroll"> <mml:mrow> <mml:msubsup> <mml:mi>α</mml:mi> <mml:mrow> <mml:mrow> <mml:mi>int</mml:mi> </mml:mrow> </mml:mrow> <mml:mrow> <mml:mrow> <mml:mi>LSMO</mml:mi> </mml:mrow> </mml:mrow> </mml:msubsup> <mml:mstyle scriptlevel="0"/> <mml:mo>≈</mml:mo> <mml:mstyle scriptlevel="0"/> <mml:mn>1.4</mml:mn> <mml:mo>×</mml:mo> <mml:msup> <mml:mn>10</mml:mn> <mml:mrow> <mml:mo>−</mml:mo> <mml:mn>3</mml:mn> </mml:mrow> </mml:msup> </mml:mrow> </mml:math> , supporting an extrinsic origin of the high experimental value. Guided by the self-induced inverse spin Hall effect demonstrated in LSMO (Gupta et al 2024 Phys. Rev. B 109 014437), we argue that the large spin Hall angle <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" overflow="scroll"> <mml:mrow> <mml:mo stretchy="false">|</mml:mo> <mml:msub> <mml:mi>θ</mml:mi> <mml:mrow> <mml:mrow> <mml:mi>SH</mml:mi> </mml:mrow> </mml:mrow> </mml:msub> <mml:mrow> <mml:mo stretchy="false">|</mml:mo> </mml:mrow> <mml:mo>≃</mml:mo> <mml:mn>0.093</mml:mn> </mml:mrow> </mml:math> and low longitudinal conductivity of LSMO enable an efficient conversion of spin current to charge current boosting the effective damping. In the LSMO/Pt heterostructures the Pt cap shunts the charge current, raising σ xx and reducing the interfacial <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" overflow="scroll"> <mml:mrow> <mml:mo stretchy="false">|</mml:mo> <mml:msub> <mml:mi>θ</mml:mi> <mml:mrow> <mml:mrow> <mml:mi>SH</mml:mi> </mml:mrow> </mml:mrow> </mml:msub> <mml:mo stretchy="false">|</mml:mo> </mml:mrow> </mml:math> to 0.007. A Valet–Fert analysis for layer-resolved ab-initio spin accumulation gives the Pt spin-diffusion length and a non-negligible antidamping SOT coefficient, qualitatively accounting for the observed damping reduction under current bias. The seemingly anomalous damping hierarchy is thus reconciled without invoking additional interfacial mechanisms. The distinct length scales governing spin-pumping normalization, namely, the short absorption depth relevant to self-pumping in a single LSMO film versus the full magnetic thickness applicable to an LSMO/Pt bilayer, are crucial in this context. This observation suggests a practical design strategy: by simultaneously tuning the spin Hall-to-longitudinal conductivity ratio and the spin-diffusion length, one can engineer heterostructures with minimized magnetic losses for spin–orbitronics applications.
BibTeX
@article{das2025origin,
  author = {Pritam Das and Pushpendra Gupta and Seung‐Cheol Lee and Subhankar Bedanta and Satadeep Bhattacharjee},
  title = {{Origin of unexpected weak Gilbert damping in the LSMO/Pt bilayer system}},
  journal = {Journal of Physics D Applied Physics},
  year = {2025},
  doi = {10.1088/1361-6463/ae08c8},
}
Figure