Optimized Thermoelectric Properties of Bi0.48Sb1.52Te3 through AgCuTe Doping for Low-Grade Heat Harvesting
Lists
Only you see this
Abstract
Zone-melted Bi<sub>2</sub>Te<sub>3</sub>-based alloys are the only commercially available thermoelectric (TE) materials, but they suffer from mediocre figure of merit (<i>ZT</i>) values and brittleness. In this work, we prepared Bi<sub>0.48</sub>Sb<sub>1.52</sub>Te<sub>3</sub> sintered samples using a hot-pressing method and added tiny AgCuTe to improve the comprehensive properties. Because the carrier concentration is boosted by the AgCuTe addition, the bipolar effect at higher temperature is explicitly suppressed and the power factor is also improved in a broad temperature scope. Simultaneously, κ<sub>lat</sub> is mostly diminished by the introduced phonon scattering centers comprising point defects, dislocations, and grain boundaries. Consequently, we achieved a <i>ZT</i><sub>max</sub> of 1.25 at 350 K and its average <i>ZT</i><sub>ave</sub> of 1.1 from 300 to 500 K in the (Bi<sub>0.48</sub>Sb<sub>1.52</sub>Te<sub>3</sub> + 3 wt % Te) + 0.12 wt % AgCuTe sample. Composed of this sample and commercial Bi<sub>2</sub>Te<sub>2.5</sub>Se<sub>0.5</sub>, the fabricated TE module manifests a maximum power output density of 0.31 W cm<sup>-2</sup> (<i>T</i><sub>cold</sub> = 300 K and <i>T</i><sub>hot</sub> = 500 K). This work suggests that AgCuTe-doped Bi<sub>0.48</sub>Sb<sub>1.52</sub>Te<sub>3</sub> is promising for recovering low-grade thermal energy near room temperature.
BibTeX
@inproceedings{wu2021optimized,
author = {Gang Wu and Zipeng Yan and Xuemei Wang and Xiaojian Tan and Kun Song and Lidong Chen and Zhe Guo and Guoqiang Liu and Qiang Zhang and Haoyang Hu and Jun Jiang},
title = {{Optimized Thermoelectric Properties of Bi<sub>0.48</sub>Sb<sub>1.52</sub>Te<sub>3</sub> through AgCuTe Doping for Low-Grade Heat Harvesting}},
booktitle = {ACS},
year = {2021},
doi = {10.1021/acsami.1c19893},
}Loading related content...