Optimized hydrophobic magnetic nanoparticles stabilized pickering emulsion for enhanced oil recovery in complex porous media of reservoir

Xiaojuan Hu, Yunqian Long, Xuan Gong, Yuyi Wang, Xiaohe Huang, Y. P. Xu, Jing Liu, Bohong Wang, Fuquan SongFrontiers in Energy Research 2023 · DOI

Abstract

In mature oil reservoirs, traditional water flooding often fails to recover significant portions of oil trapped in low-permeability zones. While emulsion flooding can mitigate this by diverting flow, conventional surfactant-stabilized emulsions are prone to demulsification under harsh reservoir conditions. This study presents a novel Pickering emulsion stabilized by specially engineered $Fe_3O_4@PDA@Si$ magnetic nanoparticles. These nanoparticles feature a hydrophobic core-shell structure that creates exceptionally stable water-in-oil (W/O) emulsions. Experimental results demonstrate that this system can increase incremental oil recovery by up to 17.39% in laboratory core tests, primarily through a mechanism of "profile control" where emulsion droplets plug high-permeability channels to reach untapped oil.

Introduction

The efficiency of oil recovery in mature fields is often hampered by the "fingering" effect of water flooding, where injected water takes the path of least resistance through high-permeability channels, bypassing oil in tighter pores. Emulsion flooding is a proven strategy to block these channels, but its effectiveness is limited by the chemical and thermal instability of traditional surfactants. Pickering emulsions, stabilized by solid nanoparticles, offer a more robust alternative. This research explores the synthesis and application of multi-layered magnetic nanoparticles to create a high-performance Pickering emulsion for Enhanced Oil Recovery (EOR).

Nanoparticle Synthesis and Emulsion Design

The researchers developed a three-layered nanoparticle, $Fe_3O_4@PDA@Si$, designed for both stability and functionality. The process begins with a 30 nm magnetic $Fe_3O_4$ core, which is then coated with Polydopamine (PDA) to prevent oxidation. Finally, the surface is modified with a fluorinated silane ($1H, 1H, 2H, 2H$-perfluorodecyltrichlorosilane) to achieve high hydrophobicity, shifting the water contact angle from 35.9° to 125.9°.

The synthetic route of $Fe_3O_4@PDA@Si$ nanoparticles involves core synthesis, PDA coating, and silane surface modification.

Experimental Methodology

The performance of the $Fe_3O_4@PDA@Si$ Pickering emulsion was evaluated using two primary methods: microscopic flooding in etched glass micromodels and core flooding in artificial rock samples. The micromodels allowed for direct visual observation of the emulsion's movement through pore structures, while the core flooding tests quantified recovery gains across a range of permeabilities ($219.34$ to $834.86 \times 10^{-3} \mu m^2$).

The experimental setup included (A) an etched glass micromodel for visual analysis and (B) a flow system for microscopic flooding experiments.

Results and Discussion

The resulting Pickering emulsion exhibited remarkable stability, with a water separation rate of only 6% at 50°C. Microscopic analysis showed droplet diameters of approximately 15 μm, which proved ideal for "profile control." By plugging larger pores, the emulsion forced subsequent water injections into smaller, oil-rich pores that were previously bypassed.

In microscopic models, the system increased oil recovery by 10.18%. More significantly, core flooding experiments showed incremental recovery gains between 12.36% and 17.39%. Notably, the emulsion performed best in the lowest-permeability cores, where the plugging effect was most pronounced. This inverse relationship between permeability and recovery gain highlights the emulsion's effectiveness in complex, heterogeneous reservoir environments.

Conclusion

The $Fe_3O_4@PDA@Si$ stabilized Pickering emulsion represents a significant advancement in EOR technology. Its superior stability and effective profile control mechanism offer a viable solution for recovering trapped oil in mature reservoirs. Future work will focus on simplifying the multi-step synthesis process and exploring the potential for active "magnetic steering" of the emulsion through external fields to further optimize recovery efficiency.

Summary updated

Abstract

With an extensive application of flooding technologies in oil recovery, traditional emulsion flooding has seen many limits due to its poor stability and easy demulsification. Pursuing a new robust emulsion plays a fundamental role in developing highly effective emulsion flooding technology. In this work, a novel Pickering emulsion with special magnetic nanoparticles Fe 3 O 4 @PDA@Si was designed and prepared. To disclose the flooding mechanism from magnetic nanoparticles, the physico-chemical characterization of Fe 3 O 4 @PDA@Si was systematically examined. Meanwhile, the flooding property of the constructed Pickering emulsion was evaluated on the basis of certain downhole conditions. The results showed that the synthesis of Fe 3 O 4 @PDA@Si nanoparticles was found to have a hydrophobic core-shell structure with a diameter of 30 nm. Pickering emulsions based on Fe 3 O 4 @PDA@Si nanoparticles at an oil-to-water ratio of 5:5, 50°C, the water separation rate was only 6% and the droplet diameter of the emulsion was approximately 15 μm in the ultra-depth-of-field microscope image. This demonstrates the excellent stability of Pickering emulsions and improves the problem of easy demulsification. We further discussed the oil displacement mechanism and enhanced oil recovery effect of this type of emulsion. The microscopic flooding experiment demonstrated that profile control of the Pickering emulsion played a more important role in enhanced recovery than emulsification denudation, with the emulsion system increasing oil recovery by 10.18% in the micro model. Core flooding experiments have established that the incremental oil recovery of the Pickering emulsion increases with decreasing core permeability, from 12.36% to 17.39% as permeability drops from 834.86 to 219.34 × 10 −3 μm 2 . This new Pickering emulsion flooding system stabilized by Fe 3 O 4 @PDA@Si nanoparticles offers an option for enhanced oil recovery (EOR).
BibTeX
@inproceedings{hu2023optimized,
  author = {Xiaojuan Hu and Yunqian Long and Xuan Gong and Yuyi Wang and Xiaohe Huang and Y. P. Xu and Jing Liu and Bohong Wang and Fuquan Song},
  title = {{Optimized hydrophobic magnetic nanoparticles stabilized pickering emulsion for enhanced oil recovery in complex porous media of reservoir}},
  booktitle = {Frontiers in Energy Research},
  year = {2023},
  doi = {10.3389/fenrg.2023.1212664},
}
Figure