TL;DR
This paper presents optimized low-voltage p-GaN gate HEMTs fabricated on 6-inch silicon using a CMOS-compatible process. By fine-tuning the source field plate and interlayer dielectric thickness, the researchers significantly improved device reliability, reducing dynamic ON-resistance degradation and threshold voltage shifts, paving the way for more efficient secondary power solutions for AI applications.
What Problem Does This Paper Address?
The burgeoning demand for efficient and compact secondary power solutions, particularly for Artificial Intelligence (AI) systems, is driving the need for advanced power devices. While Gallium Nitride (GaN) High Electron Mobility Transistors (HEMTs) offer superior switching performance compared to traditional silicon, low-voltage p-GaN gate HEMTs face challenges related to stability and reliability. Specifically, issues like dynamic ON-resistance degradation and threshold voltage shifts under stress can limit their practical application. This paper aims to address these reliability concerns by optimizing the device structure of low-voltage p-GaN gate HEMTs to enhance their performance and robustness for demanding AI power applications.
Methods
The researchers employed a CMOS-compatible process on 6-inch silicon wafers to fabricate p-GaN/AlGaN/GaN structures. Key to their approach was the optimization of two critical structural elements:
- Source Field Plate (SFP): This feature was engineered to smooth the electric field distribution, particularly at the drain-side gate edge, thereby mitigating high electric field peaks.
- Interlayer Dielectric (ILD) Thickness: The thickness of the SiO2 passivation layer was systematically varied to investigate its impact on device performance and reliability.
The fabrication process involved MOCVD for epitaxial growth, followed by standard semiconductor processing steps like ion implantation for isolation, plasma etching, atomic layer deposition (ALD) and plasma-enhanced chemical vapor deposition (PECVD) for passivation, and physical vapor deposition (PVD) for metallization. Device characterization included output and transfer characteristics, gate breakdown, bias stress tests, and pulsed I-V measurements to assess dynamic performance. TCAD simulations were used to understand the electric field distribution.
Datasets
Not discussed in the paper. The study focuses on device fabrication and characterization rather than training on large datasets.
Key Insights and Ideas
- Structural Optimization is Key to Reliability: The study strongly emphasizes that careful engineering of the device structure, specifically the source field plate and interlayer dielectric, is paramount for achieving high reliability in low-voltage p-GaN HEMTs.
- Source Field Plate's Role in Dynamic Performance: The presence of a source field plate significantly suppresses dynamic ON-resistance degradation and threshold voltage shifts. This is attributed to its ability to smooth electric fields and reduce stress-induced effects.
- ILD Thickness Trade-offs: While an optimal ILD thickness (235 nm in this study) can enhance dynamic performance, deviations from this optimum can lead to either increased dynamic RON degradation (thicker ILD) or potentially other issues (thinner ILD).
- CMOS Compatibility is Achievable: The successful fabrication of these advanced GaN devices on silicon using a CMOS-compatible process opens doors for easier integration and mass production.
- High Blocking Voltage Achieved: The optimized devices demonstrate impressive blocking voltages exceeding 180 V, making them suitable for various secondary power conversion applications.
Key Results
- Improved Dynamic Performance: Dynamic ON-resistance degradation was reduced from over 60% (without SFP) to approximately 16% (with a 0.25 µm SFP).
- Reduced Threshold Voltage Shift: The threshold voltage (VTH) shift under stress was significantly reduced from 1.1 V to 0.5 V with the optimized structure.
- High Blocking Voltage and Low ON-Resistance: Devices with an LGD of 1.5 µm achieved a blocking voltage exceeding 180 V, a high VTH of 1.6 V, and a low static ON-resistance (RON) of 2.8 Ω·mm.
- Wafer-Level Uniformity: The fabricated devices exhibited extraordinary wafer-level uniformity in both VTH and RON.
- Successful Stress Tests: The devices passed preliminary gate bias stress and high-voltage OFF-state stress tests, demonstrating their robustness.
- Optimal ILD Thickness: A 235 nm ILD thickness was found to provide the best dynamic performance for the specific device structure studied.
Limitations and Future Work
- Preliminary Stress Tests: The paper mentions "preliminary" gate bias stress and OFF-state stress tests. More extensive and long-term reliability testing under various operating conditions would be beneficial to fully validate the devices' long-term stability.
- Specific Device Structure: The optimization results are specific to the studied device structure (LGD = 1.5 µm, SFP = 0.25 µm). Further research could explore the impact of these optimizations on devices with different dimensions and configurations.
- AI Infrastructure Focus: While the paper highlights the relevance for AI secondary power solutions, future work could involve integrating these optimized HEMTs into actual power converter circuits and evaluating their performance in real-world AI system applications.
- Further Optimization: The authors suggest that these findings provide guidance for future high-performance device fabrication, implying that further refinements and explorations are possible.
Summary updated