Optimization of Freeze-drying Process of Tigecycline for Injection

Ju RenChinese 2013

Abstract

To shorten the freeze-drying cycle and improve the stability of tigecycline for injection, the kind and dosage of freeze-drying protective agent, the pH value of the solution and heat conducting oil temperature in pre-freezing and sublimation stage were optimized. The optimal freeze-drying process was to add lactose as the protectant with the amount of two times as much as tigecycline and adjust to pH 5.0- 6.5 with 1 mol/L hydrochloric acid. Intermediate product should be keep for about 0.5 h at the vicinity of the eutectic point(-10 ℃) before cooled to -40 ℃, then the product should be keep for 1 h at -40 ℃. The next step was to heat the already frozen product to -10 ℃ and keep for 0.5 h. Subsequently, the temperature was decreased to-40 ℃ again and maintained for 2 h. Then the conducting oil temperature should be set at 8 ℃ for about 6.5 h before the temperature was elevated to 40 ℃ for 4.5 h. This improved freeze-drying process would significantly improve the stability of the final product and decrease the moisture content, and whereas reduce the freeze drying period to about 20 h.
BibTeX
@inproceedings{ren2013optimization,
  author = {Ju Ren},
  title = {{Optimization of Freeze-drying Process of Tigecycline for Injection}},
  booktitle = {Chinese},
  year = {2013},
}

Loading related content...

Figure