Optimization for Massive 3D-RIS Deployment: A Generative Diffusion Model-Based Approach

Kaining Wang, Bo Yang, Zhiwen Yu, Xuelin Cao, Mérouane Debbah, Chau YuenarXiv 2025 · DOI · arXiv

Introduction

Reconfigurable Intelligent Surfaces (RIS) represent a transformative technology for 6G wireless networks, enabling the "shaping" of the propagation environment by reflecting signals to circumvent obstacles. However, the optimal placement of these surfaces in a three-dimensional (3D) space is a complex, NP-hard problem. Traditional optimization methods, such as Branch-and-Bound (BB), are computationally prohibitive for large-scale deployments. Meanwhile, standard Deep Reinforcement Learning (DRL) approaches often struggle with local optima and lack the flexibility to adapt to varying environmental configurations, such as changes in the number of buildings or users. This paper addresses these challenges by proposing a generative diffusion model-based approach for massive 3D-RIS deployment.

Methodology

The authors frame the RIS deployment problem as a conditional generation task. Instead of direct coordinate calculation, the optimal deployment pattern is "generated" based on environmental features, including the positions of the Base Station (BS), users, and obstacles.

The core of the approach is a Denoising Diffusion Probabilistic Model (DDPM). The process involves two main phases:

  1. Forward Diffusion Process: Optimal deployment data is incrementally corrupted with Gaussian noise until it becomes pure noise.
  2. Reverse Diffusion Process: A U-Net-based denoising network learns to iteratively remove the noise, reconstructing the optimal RIS locations from a random state, guided by the specific spatial map of the environment.
The forward and reverse diffusion processes for RIS location generation.

To enhance performance, the model utilizes Classifier-Free Guidance, balancing learned deployment patterns with specific environmental constraints. Practical deployment is ensured through a "Top-L projection" to select the required number of RIS units and a minimum spacing constraint to prevent physical overlap.

Experimental Setup

The model was trained and validated using synthetic datasets featuring nine distinct scenarios with varying densities of obstacles and users (ranging from 1 to 10). "Expert labels" for training were generated via an exhaustive search to establish ground truth optimal placements. A key focus of the evaluation was generalization: models trained on intermediate scenarios (e.g., 3 obstacles, 3 users) were tested on entirely unseen layouts to assess their adaptability.

Results and Analysis

The proposed diffusion method demonstrates significant advantages over traditional baselines. It achieved an "exceed ratio" (the ratio of achieved SNR to the theoretical maximum) of over 0.95 within the first 100 training epochs. In contrast to Reinforcement Learning methods like Proximal Policy Optimization (PPO), which exhibited unstable convergence, the diffusion model provided steady and superior performance.

Cross-scenario SNR performance matrix demonstrating the model's generalization capabilities.

A standout finding is the model's robust generalization. As shown in the performance matrix, a model trained on medium-complexity environments can effectively deploy RIS in both simpler and more complex scenarios without retraining. This suggests the model learns the underlying logic of spatial deployment rather than just memorizing specific maps.

Conclusion and Future Work

By treating the wireless environment as a "prompt" for generative modeling, this approach moves beyond simple regression to capture the distribution of high-quality deployment solutions. While current work relies on grid discretization and time-consuming expert label generation, future research will explore continuous coordinate systems and "physics-informed" diffusion models to reduce reliance on pre-calculated labels. Additionally, extending the model to handle dynamic, high-speed mobility scenarios remains a critical next step for real-world 6G applications.

Summary updated

BibTeX
@misc{wang2025optimization,
  author = {Kaining Wang and Bo Yang and Zhiwen Yu and Xuelin Cao and Mérouane Debbah and Chau Yuen},
  title = {{Optimization for Massive 3D-RIS Deployment: A Generative Diffusion Model-Based Approach}},
  year = {2025},
  eprint = {2509.11969},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2509.11969},
}
Figure