Optimal Rotational Angular Velocity Determination Method Based on Compound Rotary Semi-Strapdown Inertial Navigation System

Chenming Zhang, Jie Li, Xiaoqiao Yuan, Xi Zhang, Xiaokai Wei, Kaiqiang Feng, Chenjun Hu, Debiao Zhang, Yubing JiaoSensors 2022 · DOI

TL;DR

This paper tackles the challenge of improving navigation accuracy in high-speed rotary missiles by proposing an optimal rotational angular velocity determination method for Compound Rotary Semi-Strapdown Inertial Navigation Systems (CRM-RSSINS). By carefully selecting the ratio of two modulation angular velocities, they demonstrate a significant reduction in navigation errors, outperforming traditional methods.

What Problem Does This Paper Address?

Precision-guided munitions, especially high-speed rotary ones, are crucial for modern warfare due to their accuracy and high information update rates. Strapdown Inertial Navigation Systems (SINS) are commonly used in these systems, but their inherent error accumulation over time limits their effectiveness, especially for missiles with short flight times. While Rotary Semi-Strapdown Inertial Navigation Systems (RSSINS) offer a solution by modulating sensor errors into periodic signals, the effectiveness of Compound Rotary Semi-Strapdown Inertial Navigation Systems (CRM-RSSINS) is highly dependent on the chosen modulation angular velocities. This paper addresses the critical need to find the optimal combination of these velocities to maximize error suppression and meet the stringent accuracy requirements of guided missiles.

Methods

The authors propose a "K-value method" to determine the optimal modulation angular velocities for CRM-RSSINS. This method focuses on the ratio (K) between the two modulation angular velocities (ωr1 and ωr2) as the primary factor influencing navigation error.

  1. Error Analysis: They first analyze the residual error model of CRM, breaking down errors into bias, scale factor, and installation errors. They mathematically derive how these errors are modulated by the rotation.
  2. K-Value Method: The core of their approach is to analyze the trend of navigation error (specifically position error) as a function of the ratio K = ωr2/ωr1. By observing how the error changes with different K values, they identify the optimal range.
  3. Simulation and Experimentation: The proposed method is validated through simulations and experiments. They design various rotation schemes with different K values and test them under stationary, yaw motion, and acceleration/deceleration states.

Datasets

Not discussed in the paper. The paper relies on simulated IMU data generated based on specified error parameters (bias, scale factor, installation error) for gyros and accelerometers.

Key Insights and Ideas

  • The Ratio is Key: The paper strongly suggests that the ratio of the two modulation angular velocities (K) is the dominant factor in determining the navigation error suppression effectiveness of CRM-RSSINS, rather than the absolute values of the velocities themselves.
  • Infeasibility of Certain Ratios: Ratios of K = 0 (single-axis rotation) and K = 1 (where the two rotation axes are synchronized in a specific way) lead to significant error divergence, confirming theoretical predictions.
  • Optimal Range for K: The analysis reveals that K values within the range of [-1, 1] lead to substantial error dispersion. Optimal performance is observed for K values outside this range, specifically around K=2 and K=3.
  • Modulation Velocity Magnitude Matters (Up to a Point): While the ratio K is primary, the absolute magnitude of the modulation angular velocities also plays a role. Higher velocities generally lead to shorter modulation periods and smaller error amplitudes, but this effect becomes less pronounced beyond a certain threshold (around 20°/s).

Key Results

  • Significant Accuracy Improvement: The proposed K-value method for determining optimal modulation angular velocities leads to substantial improvements in navigation accuracy.
  • Attitude Accuracy: CRM, with the optimized scheme, improves attitude accuracy by approximately 70% for roll angle and 50% for pitch and yaw angles compared to SINS and SRM.
  • Position Accuracy: The position error achieved with the optimized CRM scheme is about two orders of magnitude lower than that of SRM and SINS.
  • Error Suppression: The method effectively suppresses bias errors in all three axes of the IMU and mitigates the divergence of navigation parameters.
  • SRM Limitations: The study highlights the inherent limitation of Single-Axis Rotation Modulation (SRM), which cannot effectively modulate errors along the projectile's rotation axis.

Limitations and Future Work

  • Idealized Conditions: The simulations and analysis are based on idealized IMU error models. Real-world sensor noise and unmodeled errors might affect performance.
  • Computational Complexity: While the K-value method simplifies the selection of parameters, the underlying CRM-RSSINS still involves complex calculations.
  • Future Work: The authors suggest that precise control of the rotating platform itself will be a crucial area for future research to further enhance navigation accuracy.

Summary updated

BibTeX
@article{zhang2022optimal,
  author = {Chenming Zhang and Jie Li and Xiaoqiao Yuan and Xi Zhang and Xiaokai Wei and Kaiqiang Feng and Chenjun Hu and Debiao Zhang and Yubing Jiao},
  title = {{Optimal Rotational Angular Velocity Determination Method Based on Compound Rotary Semi-Strapdown Inertial Navigation System}},
  journal = {Sensors},
  year = {2022},
  doi = {10.3390/s22124583},
}
Figure