Optimal Resource Block Assignment and Power Allocation for D2D-Enabled NOMA Communication

Jian Chen, Jie Jia, Yuanwei Liu, Xingwei Wang, Abdol-Hamid AghvamiIEEE Access 2019 · DOI

Introduction

The exponential growth of mobile data traffic necessitates innovative spectrum management strategies. This paper explores the integration of Device-to-Device (D2D) communication and Non-Orthogonal Multiple Access (NOMA) to enhance network capacity and energy efficiency. While D2D allows direct communication between proximate devices, NOMA enables multiple users to share the same frequency resources through power-domain multiplexing.

The Optimization Challenge

Combining D2D and NOMA creates a complex, NP-hard optimization problem. Network managers must simultaneously determine resource block (RB) assignments, transmit power levels, and the optimal Successive Interference Cancellation (SIC) decoding order. These variables are highly interdependent: a change in D2D transmit power alters the interference environment for cellular users, potentially shifting the optimal NOMA decoding sequence.

Figure 1: System model of a D2D-enabled NOMA network showing NOMA groups and D2D pairs sharing spectrum.

Proposed Methodology: Distributed Decision Making

The authors propose a Distributed Decision Making (DDM) framework that decouples the problem into two hierarchical layers:

  1. RB Assignment (Top Layer): A self-adaptive Differential Evolution (DE) algorithm manages the discrete task of assigning devices to specific channels. Unlike static DE, this version dynamically adjusts mutation and crossover rates to prevent convergence on local optima.
  2. Power Allocation (Bottom Layer): Once RBs are assigned, power levels are optimized. For cellular user equipments (CUEs), the system calculates the minimum power required to meet Quality of Service (QoS) targets, thereby minimizing interference for D2D pairs. For D2D pairs, Successive Convex Approximation (SCA) is employed to transform non-convex objective functions into solvable convex sub-problems.

Key Insights

A primary contribution of this work is treating the SIC decoding order as a dynamic variable. By recognizing that interference from D2D pairs dictates the optimal decoding sequence for NOMA users, the framework achieves higher precision than static models. Furthermore, the study highlights that NOMA acts as a spectrum enabler; by packing more cellular users into fewer RBs, it leaves more resources available for D2D communication.

Simulation and Results

The framework was evaluated via Matlab simulations of a single-cell environment (500m radius) with up to 10 CUEs and 15 D2D pairs. Key findings include:

  • Performance Gains: The joint NOMA-D2D approach significantly outperformed traditional Orthogonal Multiple Access (OMA) in terms of total D2D throughput and energy efficiency (bits per Joule).
  • Computational Viability: The algorithm converged in approximately 4,000 iterations, taking roughly 120 seconds on standard consumer hardware (Intel i5-4300 CPU).
  • Scalability: The system demonstrated robust interference management as the number of available RBs and D2D pairs increased.

Conclusion and Future Directions

While the proposed framework offers substantial gains in data rates, real-world deployment faces challenges. The current 120-second convergence time exceeds the millisecond requirements of 5G scheduling. Future research should focus on decentralized implementations to reduce signaling overhead and the development of hardware-accelerated algorithms for real-time operation.

Summary updated

BibTeX
@article{chen2019optimal,
  author = {Jian Chen and Jie Jia and Yuanwei Liu and Xingwei Wang and Abdol-Hamid Aghvami},
  title = {{Optimal Resource Block Assignment and Power Allocation for D2D-Enabled NOMA Communication}},
  journal = {IEEE Access},
  year = {2019},
  doi = {10.1109/access.2019.2926438},
}
Figure