Optimal NURBS conversion of PDE surface-represented high-speed train heads

Shuangbu Wang, Yu Xia, Ruibin Wang, Lihua You, Jianjun ZhangOptimization 2019 · DOI

Abstract

The aerodynamic optimization of high-speed train heads is often hindered by the high computational cost of simulating complex geometries defined by numerous design variables. While Partial Differential Equation (PDE)-based modeling offers a way to describe smooth surfaces with fewer variables, it lacks compatibility with industrial CAD/CAM/CAE standards, which rely on Non-Uniform Rational B-Splines (NURBS). This paper presents a novel hybrid optimization method to convert PDE-represented train head surfaces into optimal NURBS surfaces. By integrating a unique weight deformation algorithm with Genetic Algorithms (GA) and Least Squares (LS) fitting, the proposed method achieves high-precision geometric conversion while significantly reducing the number of required control points.

Introduction

As high-speed rail technology advances, the aerodynamic performance of the train head has become a primary bottleneck for further speed increases. Optimizing these shapes typically involves heavy computational fluid dynamics (CFD) simulations. PDE-based geometric modeling is advantageous here because it can represent complex, high-order continuous surfaces using a minimal set of design variables. However, the industry standard for engineering software is NURBS. Bridging the gap between the efficiency of PDE modeling and the universality of NURBS is essential for practical industrial application.

Methodology: The Optimal Conversion Pipeline

The conversion process involves three main stages: PDE surface generation, NURBS formulation with weight deformation, and a hybrid optimization loop.

PDE Surface Generation

The train head is first modeled using 4th-order PDEs. This approach ensures that the resulting surface patches maintain high-order continuity at their boundaries, which is critical for minimizing aerodynamic drag and ensuring a smooth aesthetic profile.

Weight Deformation and NURBS Formulation

A standard NURBS surface is defined by control points and weights. Optimizing every weight individually creates an unmanageable number of variables for complex models. To solve this, the authors introduced a weight deformation algorithm. This technique uses a single parameter, $dw$, to adjust the overall concavity or convexity of a NURBS patch, effectively collapsing hundreds of potential variables into one.

Hybrid Optimization Framework

The conversion is treated as an optimization problem where the objective is to minimize the error between the NURBS surface and the original PDE surface.

  1. Genetic Algorithm (GA): The GA searches for the optimal number of control points and the best weight deformation value ($dw$).
  2. Least Squares (LS) Fitting: For each candidate structure proposed by the GA, the LS method calculates the precise spatial coordinates of the control points to minimize geometric deviation.
Flowchart of the proposed optimal conversion process from PDE surfaces to NURBS.

Results and Discussion

The method was validated using a symmetrical high-speed train head model decomposed into 22 distinct PDE surface patches. The optimization successfully reconstructed the full head geometry (44 patches total) with a maximum error of less than 1%.

Key findings include:

  • Efficiency: The weight deformation approach reduced the number of control points by 5% to 6% compared to standard fixed-weight conversion methods for the same accuracy level.
  • Data Compression: By allowing a 1% error threshold, the total number of control points for the half-model was reduced from 2,956 to 1,939—a reduction of over 34%. This significantly lowers the computational "weight" for downstream CAE simulations.

Conclusion

This research provides a robust framework for translating advanced mathematical surface models into industry-standard formats. By reducing the complexity of NURBS representations without sacrificing aerodynamic fidelity, this method facilitates more efficient design cycles for high-speed rail. Future work will explore the use of 6th-order PDEs for even greater geometric flexibility and the integration of this conversion process into real-time aerodynamic optimization loops.

Summary updated

Abstract

The head shape of high-speed trains has become a critical factor in boosting the speed further. Aerodynamic simulation-based optimization is a dominant method to obtain the optimal head shape which relies on detailed train head models defined by a lot of design variables. Since aerodynamic simulation-based optimization involves heavy calculations, too many design variables not only causes high computational costs, but also makes the optimal solution difficult to obtain. Therefore, how to use few design variables to define detailed train head model is the key to success. Partial differential equation (PDE)-based geometric modelling which creates a complicated PDE patch with few design variables provides an effective solution to this problem. In addition, it also has the advantage of naturally maintaining any high-order continuities between two adjacent surfaces which is very important in designing highly smooth train heads to achieve excellent aerodynamic performance. At the present time, PDE-based geometric modelling cannot be directly applied in computer-aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE) since it has not become an industrial standard. In contrast, non-uniform rational B-splines (NURBS) are commonly used in CAD, CAM, CAE, and many other engineering fields. They have already become part of industry wide standards. In order to apply PDE-based geometric modelling in shape design of high-speed train heads for CAD etc., how to optimally convert PDE surfaces into NURBS surfaces must be addressed. In this paper, a new method of achieving optimal conversion of PDE surfaces representing high-speed train heads into NURBS surfaces is developed. It takes control points and weight deformations of NURBS surfaces to be design variables, and the error between NURBS surfaces and PDE surfaces as the objective function. The least squares fitting and the genetic algorithm are combined to obtain the optimal conversion between PDE surfaces and NURBS surfaces. The application examples demonstrate the effectiveness of the developed method.
BibTeX
@inproceedings{wang2019optimal,
  author = {Shuangbu Wang and Yu Xia and Ruibin Wang and Lihua You and Jianjun Zhang},
  title = {{Optimal NURBS conversion of PDE surface-represented high-speed train heads}},
  booktitle = {Optimization},
  year = {2019},
  doi = {10.1007/s11081-019-09425-6},
}
Figure