Optimal Hybrid Full-Duplex/Half-Duplex Scheme of the Buffer Aided Relay System

Cheng Li, Bin Xia, Pihe Hu, Yao YaoarXiv 2018 · OpenReview

Introduction

In wireless relay networks, traditional Half-Duplex (HD) relays are widely used due to their simplicity; they either receive or transmit at any given time. However, this approach inherently limits spectral efficiency. Full-Duplex (FD) relays offer a theoretical doubling of efficiency by simultaneous transmission and reception on the same frequency. The primary obstacle to FD implementation is Residual Self-Interference (RSI), where the relay's own transmission leaks into its receiver.

This paper proposes an optimal hybrid scheme that intelligently switches between FD and HD modes in buffer-aided relay systems. By integrating a data buffer at the relay to decouple the source-to-relay (S-R) and relay-to-destination (R-D) links, the system can adaptively select the most efficient transmission mode based on instantaneous channel conditions.

System Model and Methods

The study considers a three-node system consisting of a Source (S), a Relay (R) equipped with a buffer, and a Destination (D). The relay operates under four distinct transmission modes:

  • $M_1$ (HD Receive): Source transmits to Relay.
  • $M_2$ (HD Transmit): Relay transmits to Destination.
  • $M_3$ (Full-Duplex): Simultaneous S-R and R-D transmission.
  • $M_4$ (Silent): No transmission occurs.
System model of a buffer-aided relay with residual self-interference (RSI).

To determine the optimal strategy, the authors partitioned the channel state space into six regions based on the supportable transmission rates under HD and FD conditions. The optimization goal was to maximize long-term statistical throughput while maintaining buffer stability (average arrival rate equals average departure rate). This binary integer programming problem was relaxed into a continuous probability problem and solved using Karush-Kuhn-Tucker (KKT) conditions, providing precise selection probabilities for each mode.

Key Insights

The research highlights several critical aspects of hybrid relaying:

  • RSI Sensitivity: FD mode is not universally superior. When RSI is high or link qualities are significantly unbalanced, the system optimally reverts to HD mode.
  • Buffer as a Balancer: The buffer allows the system to exploit favorable channel states on one link independently of the other, which is crucial for maximizing FD utility.
  • Statistical Scenarios: Five distinct cases ($\Psi_1$ to $\Psi_5$) were identified based on link strength ratios. For instance, in scenarios where the S-R link is dominant, the system prioritizes mode $M_2$ to prevent buffer overflow.

Key Results

Numerical simulations using Rayleigh fading models demonstrate that the proposed hybrid scheme significantly outperforms traditional benchmarks.

System throughput vs. fixed transmission rate for varying levels of self-interference.

Key findings include:

  • Throughput Gains: The hybrid scheme achieves up to a 95% throughput improvement over traditional HD-only systems.
  • Robustness to Interference: By adaptively switching to HD when RSI is prohibitive, the scheme maintains high performance even in high-interference environments.
  • Optimal Transmission Rate: There exists a "sweet spot" for the fixed transmission rate ($R_0$). If $R_0$ is too high, outage probability increases; if too low, bandwidth is underutilized. The hybrid scheme maintains superior throughput across a broader range of $R_0$ compared to pure FD or HD systems.

Conclusion and Future Work

The proposed hybrid FD/HD scheme effectively leverages buffer-aided relaying to mitigate the impact of self-interference. While the current model assumes perfect global channel state information (CSI) and a fixed transmission rate, future research could explore the integration of rate adaptation and the impact of finite buffer sizes on system performance.

Summary updated

BibTeX
@misc{li2018optimal,
  author = {Cheng Li and Bin Xia and Pihe Hu and Yao Yao},
  title = {{Optimal Hybrid Full-Duplex/Half-Duplex Scheme of the Buffer Aided Relay System}},
  year = {2018},
  url = {https://openreview.net/forum?id=9zqQ-axEcRE},
}
Figure