Optimal Coverage of Full Frequency Reuse in FFR Networks in Relation to Power Scaling of a Base Station

Minyoung Seo, Seok-Ho Chang, Jong-Man Lee, Ki-Hun Kim, Hyun Park, Sang-Hyo Kim2023 · DOI

TL;DR

This paper investigates how the optimal coverage area for "full frequency reuse" (FFR) in cellular networks changes when a single base station's transmission power is adjusted. The key finding is that increasing a single base station's power leads to an expansion of its optimal FFR coverage area, a result that contrasts with previous studies where all base stations were scaled together. This has important implications for designing more efficient and adaptable cellular networks.

What Problem Does This Paper Address?

Cellular networks aim to maximize throughput and minimize interference. A technique called Fractional Frequency Reuse (FFR) is used to manage interference by dividing a cell into a "full FR" region (near the center) and a "partial FR" region (near the edge). The "full FR coverage" (or distance threshold) defining these regions is crucial for system performance. While previous research has explored optimizing this coverage, the impact of individual base station power scaling on this optimal coverage has not been thoroughly analyzed. Specifically, the authors address the gap in understanding how adjusting the power of one base station, rather than all simultaneously, affects the optimal FFR coverage within that cell. This is a more realistic scenario for dynamic network management.

Methods

The paper employs a mathematical and analytical approach to derive the relationship between base station power and optimal full FR coverage. They model cellular networks using MIMO (Multiple-Input Multiple-Output) systems, specifically considering OSTBC (Orthogonal Space-Time Block Codes) and V-BLAST (Vertical Bell Laboratories Layered Space-Time Architecture) with zero-forcing linear receivers. The core of their analysis involves deriving and comparing the outage probabilities for both full FR and partial FR schemes under various conditions. By analyzing the conditions under which one scheme is preferable to the other (based on data rate), they deduce the behavior of the optimal full FR coverage as base station power changes. They use exact outage probability expressions rather than high SNR approximations, aiming for more general applicability.

Datasets

Not discussed in the paper. The study relies on theoretical modeling and mathematical analysis rather than empirical data from specific datasets.

Key Insights and Ideas

  • Individual Power Scaling Matters: The most significant insight is that scaling the power of a single base station has the opposite effect on optimal FFR coverage compared to scaling all base stations uniformly. This highlights the importance of considering localized power adjustments in network design.
  • Non-Decreasing Coverage with Power: The paper analytically proves that the optimal full FR coverage in a cell is a non-decreasing function of that cell's base station power. This means as a base station transmits with more power, its optimal full FR region tends to expand.
  • Data Rate as the Deciding Factor: The preference between full FR and partial FR (and thus the optimal coverage) is critically dependent on the target data rate. For low data rates, partial FR is often preferred, while for high data rates, full FR becomes more advantageous.
  • Universality of Results: The derived relationships hold across various cellular topologies (hexagonal, linear), arbitrary base station deployments, different MIMO configurations (OSTBC, V-BLAST), and various system parameters like bandwidth, path loss, and shadowing.

Key Results

The paper analytically demonstrates that for a single base station, increasing its transmit power leads to an increase in its optimal full FR coverage. This is mathematically expressed as:

$\frac{\partial \text{coverage}}{\partial p_s} \geq 0$

This means the optimal full FR coverage is a non-decreasing function of base station power ($p_s$). This finding is supported by theoretical derivations and illustrated through figures showing how the optimal coverage area expands as base station power increases. The results are shown to be consistent for both OSTBC and V-BLAST MIMO systems.

Limitations and Future Work

  • Focus on Single Cell Power Scaling: The primary focus is on the impact of scaling a single base station's power. While this is a realistic scenario, future work could explore more complex scenarios involving coordinated power adjustments across multiple base stations.
  • Future Work on Soft Frequency Reuse (SFR): The authors suggest that future research could extend this analysis to Soft Frequency Reuse (SFR) systems, investigating the optimal full FR coverage in relation to power control factors used to boost SINR for users in the partial FR region.
  • Arbitrary Cellular Topologies: While the results are shown to apply to arbitrary cellular topologies, the figures often depict hexagonal or linear layouts for clarity.

Summary updated

BibTeX
@misc{seo2023optimal,
  author = {Minyoung Seo and Seok-Ho Chang and Jong-Man Lee and Ki-Hun Kim and Hyun Park and Sang-Hyo Kim},
  title = {{Optimal Coverage of Full Frequency Reuse in FFR Networks in Relation to Power Scaling of a Base Station}},
  year = {2023},
  doi = {10.3390/s23218925},
}
Figure