Optimal Analysis of Joint Masked-Beamforming in Secure Wireless Communication

Yongkai Zhou, Xiao Chen, Xinxing Yin, Yan Zhu, Fangbiao Li, Liang Pang, Zhi XueAdvances 2013 · DOI

Abstract

In this paper, we considered the joint maskedbeamforming in secure wireless transmission in which artificial noise is sent by the transmitter (Alice) and the receiver (Bob) jointly. A new and efficient optimization scheme is proposed to separately allocate the power ratio for Alice and assign the transmit antenna for Bob. It is proved that when Bob's artificial noise is high enough, Alice should allocate less proportion of her power to the artificial noise. The proposed model combined with proper parameter design can achieve optimal secrecy performance.

Introduction

Wireless communication is inherently vulnerable to eavesdropping due to the broadcast nature of the medium. While traditional security relies on upper-layer encryption, Physical Layer Security (PLS) leverages the physical characteristics of the wireless channel to ensure confidentiality. A prominent PLS technique is the use of "Artificial Noise" (AN), typically emitted by the transmitter (Alice) to degrade the channel of a potential eavesdropper (Eve) without affecting the legitimate receiver (Bob). However, standard models often assume Alice acts alone or possesses perfect knowledge of Eve's location. This research explores a more robust scenario where Bob actively participates in jamming Eve, optimizing the system even when Eve's position is unknown.

Methodology

The proposed framework utilizes a joint masked-beamforming and power allocation strategy. Alice and Bob are equipped with multiple antennas ($N_A, N_B \ge 2$), while Eve is modeled with a single antenna. Bob performs a dual role: receiving data on one antenna while utilizing the remaining $N_B - 1$ antennas to broadcast AN. Since Bob generates this noise, he can implement interference cancellation to maintain his own signal quality.

The optimization process involves:

  1. Antenna Selection: Bob selects the antenna with the highest channel gain for reception.
  2. Power Allocation: Alice optimizes the fraction of power ($\phi$) dedicated to the information signal versus her own AN.
  3. Environmental Modeling: The system incorporates path-loss ($\alpha = 3.76$) and defines a "Defence Identification Zone" to bound the eavesdropping threat.

Results and Discussion

The core finding of this study is the "offloading" effect. As Bob's jamming power ($P_B$) increases relative to Alice's ($P_A$), Alice can reduce her own AN contribution, focusing more power on data transmission.

Optimal power allocation ratio and secrecy capacity as a function of the power ratio between Bob and Alice.

As shown in Figure 1, the optimal power allocation ratio $\phi^*$ increases monotonically with Bob's power contribution. When Bob's jamming becomes sufficiently high, Alice's optimal strategy converges toward allocating nearly 100% of her power to the information signal ($\phi \to 1$).

Furthermore, the joint AN strategy significantly outperforms the traditional Alice-only approach.

Comparison of secrecy capacity between the joint AN scheme and the Alice-only AN scheme.

Figure 2 illustrates that the joint scheme achieves a peak secrecy capacity of 3.77 bit/Hz at an optimal $\phi$ of 0.73. In contrast, when Alice operates alone, the maximum secrecy capacity is limited to 3.06 bit/Hz with a lower optimal $\phi$ of 0.48. This shift confirms that Bob's assistance allows for more efficient data transmission while maintaining higher security levels.

Conclusion

This research demonstrates that joint AN generation by both transmitter and receiver significantly enhances wireless secrecy capacity. By offloading jamming tasks to Bob, Alice can maximize her data throughput. Future work should address practical constraints such as imperfect interference cancellation, multi-antenna eavesdroppers, and dynamic channel conditions to further validate the real-world applicability of this joint beamforming scheme.

Summary updated

Abstract

In this paper, we considered the joint maskedbeamforming in secure wireless transmission in which artificial noise is sent by the transmitter (Alice) and the receiver (Bob) jointly. A new and efficient optimization scheme is proposed to separately allocate the power ratio for Alice and assign the transmit antenna for Bob. It is proved that when Bob's artificial noise is high enough, Alice should allocate less proportion of her power to the artificial noise. The proposed model combined with proper parameter design can achieve optimal secrecy performance.
BibTeX
@inproceedings{zhou2013optimal,
  author = {Yongkai Zhou and Xiao Chen and Xinxing Yin and Yan Zhu and Fangbiao Li and Liang Pang and Zhi Xue},
  title = {{Optimal Analysis of Joint Masked-Beamforming in Secure Wireless Communication}},
  booktitle = {Advances},
  year = {2013},
  doi = {10.2991/ccis-13.2013.81},
}
Figure